Mirror film high gloss, opaque

  • Indoor assembly, Outdoor installation
  • self-adhesive
Hochglänzende Spiegelfolie als Ersatz für Glasspiegel
Montagevideo starten
Spiegelfolie wie ein echter Spiegel
Geometry A4 cut Linear metre
Rectangle
Square
Pentagon with slope
Rectangle with bevel
Rectangle with two slopes
symmetric trapezoid
right triangle
symmetrical triangle
Gable window
Rectangle with segmental arch
Rectangle with basket arch
Rectangle with semicircle
Quarter circle
Circle
Semicircle
Circle section
Oval / Ellipse
A4 Zuschnitt ca. 30 cm ca. 20 cm

Order pre-made sheets (approx. 20 x 30 cm in size) at a favourable unit price.

Cutting possible on request
Unfortunately, your desired size cannot be ordered via the online shop. However, we can still offer you the dimensions. Please ask our customer service at info@velken.shop.
from €2.10

Price per m² from: €66.53 Price per m²: €59.88 Price per m²: €66.53 incl. VAT plus shipping costs. Item no. 673000

Order accessories directly

Facilitates the installation of window films immensely! The films can be positioned on the glass without sticking. The concentrate is sufficient for an area of approx. 6m². The appropriate quantity is offered in the shopping basket.

Transfer concentrate
€3.49

This assembly set is suitable for smaller foil assemblies of up to 6m². In the set price you save over 15% compared to the individual components.

Mounting set
€8.95

This assembly set is ideal for medium-sized film installations of 5-10 m². With this bundle you save almost 23% compared to the individual components.

Assembly set professional
€14.95

Delivery time approx. 5-7 Days

CNC cutting accurate to the millimetre

free assembly tool

Properties of this film
Liability
self-adhesive
Durability
10 years (indoor installation), 5 years (outdoor installation)
Application
Glass, Plastic, Wood
Design
without
Questionst?
Start WhatsApp chat
High-gloss, particularly scratch-resistant mirror film (not a spy mirror film) MirrorEffect...

High-gloss, particularly scratch-resistant mirror film (not a spy mirror film)

MirrorEffect and AntiScratch Film

This high-quality self-adhesive film has a mirror-like appearance with an extremely high gloss level. Applied to a flat surface (glass or acrylic glass), the film surface reproduces reflections brilliantly and free of distortion, giving rooms more visual depth and brightness. The particularly high scratch resistance of the film surface ensures that the brilliant mirror effect is retained over the long term.

For the film to show a smooth mirror image, the substrate must be very smooth. Otherwise, unevenness will show in the film and distort the mirror image! A smoothly plastered wall or a wooden door/cupboard door are unfortunately not smooth enough. Before buying a large film, we ask you to test whether your surface is suitable by cutting an A4 sheet. We can also send you a free film sample on request. Glass, acrylic glass or similar are the most suitable surfaces.

Fields of application are among others

  • Bonding of plotted lettering or full-surface bonding on very smooth surfaces (similar to glass). We recommend a test application with our free sample before purchase, as not all obviously smooth surfaces are really smooth enough to avoid distortions.
  • Decorative applications with mirror-like effect in the areas of shop and trade fair construction, visual merchandising, interior design, interior architecture and much more.
  • Gives rooms more visual depth and brightness
  • Ideal for designing glass surfaces as the effect is the same on both sides

Product advantages

  • Brilliant, high-gloss mirror effect
  • Particularly scratch-resistant surface: can be applied over the entire surface without additional protection (transfer tape)
  • Mirror effect is retained over the long term
  • Easy to clean with standard cleaning agents
  • Same effect on both sides
  • Excellent plotting properties
  • Optimum flatness thanks to polyester cover

Included in delivery

You should definitely order the transfer concentrate, art. no. 020010 additionally. It makes the installation easier and leads to a better result. Alternatively, you can also use a pH-neutral cleaner. This must be pH-neutral to prevent streaks from forming together with the film adhesive!

Any offcuts are not included in the scope of delivery.

Technical data and information at a glance...

Warranty of the manufacturer

The manufacturer grants a durability guarantee of 5 years on these metal effect foils when mounted vertically outdoors. Indoors, the durability is considerably longer.

Due to the risk of glass breakage, these metal effect films should not be applied to windows or glass doors that are exposed to the sun.

Technical data
Material PET
Film thickness approx. 75 µm
Adhesive Polyacrylate adhesive
Adhesive strength 6.0 - 14.0 N/25 mm
Temperature range -30° C to + 80° C
Answers to the most frequently asked questions...

General questions

Can I get a free foil sample?

Of course, please click on this link to access the corresponding order form. You are welcome to add to the list of items if you wish. There are no costs for you!

Will you also cut the film for me?

We cut each film to the exact millimetre according to the dimensions you enter. The cutting is free of charge. You can find detailed instructions on how to measure your panes here.

Alternatively, you can also cut your film by hand with a cutter knife. However, this requires a little manual skill, so you are usually better off using our free service.

Can you also cut a round blank or other geometry?

In general, almost all 2D shapes can be produced. Many geometries (e.g. triangles, trapezoids, circles) can be ordered directly via the online shop. To do so, please click on the orange rectangle to the right of the article image. You can then choose between many different shapes.

For shapes that are not specified, please send us a small sketch (photo) in which you specify the side lengths, radii or angles. Please contact us for this purpose.

Does the film also adhere to surfaces other than glass?

The window film adheres to all surfaces that are approximately as smooth as glass. When applying the film to plastic, please bear in mind that the adhesive may bond with the plastic, making it impossible to remove the film cleanly later.

How can I clean my window pane with the film in place?

You can keep your window pane clean as usual. The film should not be rubbed with sharp-edged objects (e.g. a brush).
You can find more information in our guide General care instructions for window films.

Can the film be removed without leaving any residue?

All window films can be removed without leaving any residue and without damaging the glass surface!
Below you will find detailed instructions on how to remove old window films.

Can you also print on films?

Unfortunately, we do not currently offer foil printing and do not have any partner companies with whom we can realise foil printing.

How to mount this film on the window...
Start assembly video
Installation video for window films. Click on the picture to start.

Assembly instructions for Decoration films (self-adhesive)

You will need the following items

Installation tips

  • Two people should carry out the installation!
  • Do not install any film at temperatures on the installation side below +6° C.
  1. Fill the spray bottle with 0.5 litres of water and add the transfer concentrate (30 ml) (enough for approx. 6 to 7 m² of glass surface).
  2. Thoroughly clean the glass with commercial or our glass cleaner!
    Remove all sticky particles (e.g. paint or fly dirt) preferably with the Glass scraper blade. No dirt residues should remain on the glass!
  3. The sandblasting foil consists of the mostly white backing paper and the actual sandblasting foil.
    Now place the sandblasting foil with the view side down on the glass pane or similar. You are now looking at the back of the film.
    Then carefully and slowly peel off the backing paper at as shallow an angle as possible until it is about halfway along the entire length of the film. Cut the backing paper and stick it back onto the sandblasting film with a gap of about 2 cm to the remaining backing paper.
  4. Now hold the in place while the 2nd person starting from the corner, and at the same time spray the adhesive side of the that is now exposed with the liquid.
    Afterwards, the glass pane (surface to be pasted) must be sprayed with the liquid. Do not be sparing with the liquid, the film and pane should be well wet.
  5. Place the on the glass, the film should slide back and forth well, otherwise spray the glass again.
  6. Now spray the other side of the as well, this will make it easier for you to work with the mounting squeegee.
  7. Now press the liquid out evenly with the mounting squeegee from the centre to the right and to the left. Make sure that there is no residual water left under the film! Repeat this procedure several times to remove even invisible water residues. When doing this, wrap the supplied squeegee with a paper towel to avoid any scratches.
  8. Carefully wipe the edges and the foil with a soft cloth. If necessary, press the edges again with the mounting squeegee.
  9. Now let the dry for three days without touching it.
  10. Wait two weeks before cleaning the film for the first time and never use hard objects (brush or blade) to clean it. Commercially available glass cleaners can be used.

FAQ`s about the installation

Can I carry out the film installation alone?

Films that are no larger than 1m² can be installed alone without any problems.
For larger pieces, it is recommended that two people carry out the installation. This makes it easier to handle the film and place it on the pane.

How can I avoid dust inclusions under the adhesive back side?

First, clean your windows really thoroughly with glass cleaner. Then go over the entire window pane again with our supplied Glass scraper blade to remove any hard-core impurities on the pane (such as fly droppings). These fine stains are often invisible to the naked eye and you will be amazed at what the blade still removes.

In addition, do not lay the after peeling off (covers the adhesive side for transport) on the floor to get it wet. Rather, pull a table nearby to spray the film on. On the floor you will always stir up very fine dust particles, which will then settle on the adhesive side facing upwards. These dust particles can later show up on the pane under the , which is something to avoid.

Can I apply the without transfer concentrate?

Alternatively, you should at least use a pH-neutral cleaner. We do not recommend installation without any additive at all, which increases the gliding properties of the water!

We strongly advise against the use of water diluted with detergent. This can lead to streaking due to a reaction with the film adhesive.

Does the film have to be applied perfectly to the glass at the first attempt?

No, this is not necessary as long as you have sprayed the adhesive side of the window film and your glass sufficiently wet. Due to the moisture, the adhesive has no adhesive effect, which makes it easy to move the film and position it precisely. It is even possible to remove the film from the glass again and reapply it.

After mounting, small bubbles formed the next day

The bubbles consist of residual liquid that was not pressed out from under the film when it was applied. Over time, these run down between the already drying film adhesive as far as they can under the film and collect in some places. The bubbles disappear by themselves when the remaining liquid diffuses through the film to the outside. Depending on the outside temperature and sunlight, this can take up to three or more weeks before the film fits like a second skin.

In any case, you should wait this time and do nothing. In most cases, the blisters disappear all by themselves!

How easy is it to remove the film?

The window film itself can be easily removed. To do this, detach one corner and fold it over directly. The film can then be removed from the glass at as flat an angle as possible.

It is possible that residues of the film adhesive remain in some places. These can be soaked with our adhesive remover or acetone and then removed again with a glass scraper or ceramic field scraper. You will find detailed instructions on how to remove window films on our homepage in the FAQ`s.
Customer service

Film specialist, Dirk Bilstein - Application engineer

" I will be happy to give you expert advice on choosing the right film! "

Assembly instructions

Montagevideo starten
Installation video for window films. Click on the image to start.

Tool for easy assembly

The tool sets and accessories offered by Velken will be very useful for the success of your installation! Adhesive films, electrostatic films, decorative coatings... for each product there is the appropriate tool.

In addition to the assembly video, take a look at the detailed assembly instructions.

- 25 %
Assembly set professional
This assembly set is ideal for medium-sized film installations of 5-10 m². With this bundle you save almost 23% compared to the individual components.
040020 - Assembly set professional
€20.20 €14.95
Mirror film high gloss, opaque
  • Indoor and outdoor installation
  • self-adhesive
€66.53 / m²
Klebefolie Chrom
€23.11 / m²
Klebefolie glänzendes Gold
€23.22 / m²
Klebefolie matt gebürstetes Gold
€23.31 / m²
- 25 %
Assembly set professional
Assembly set professional
€20.20 €14.95
- 27 %
Ein Montageset mit Sprühflasche, Filzrakel und Transferkonzentrat für perfekte Ergebnisse.
Mounting set
€12.30 €8.95
Klebefolie Chrom
Chrome film
€23.11 / m²
Durchsichtige Farbfolie selbstklebend
Transparent colour film
€34.18 / m²
Undurchsichtige Farbfolie selbstklebend in großer Auswahl
Opaque colour film
€34.18 / m²
- 28 %
Premium mounting set
Premium mounting set
€49.15 €34.90
Farbkarte VeFo-Flex Premium
VeFo-Flex Premium
€19.78 / m²
Klebefolie Chrom
Chrome film
€23.11 / m²
- 27 %
Ein Montageset mit Sprühflasche, Filzrakel und Transferkonzentrat für perfekte Ergebnisse.
Mounting set
€12.30 €8.95
- 25 %
Assembly set professional
Assembly set professional
€20.20 €14.95
- 28 %
Premium mounting set
Premium mounting set
€49.15 €34.90
Lichtdurchlässige Farbfolie selbstklebend
Translucent colour film
€34.18 / m²
Questions about the item12
12 Question(s) in other languages.
Click here to view these question(s).
Question:
Ich würde gerne meinen Kleiderschrank upcyceln und eine Schwebetür zum Spiegel umfunktionieren. Ist das hier die richtige Folie dafür?
Natalie S. am 29. September 2022
Answer:
Es kommt auf die Beschaffenheit des Materials an. Wenn es sich um eine Schwebetür aus Glas handelt ist die Folie dafür super geeignet! Bei einer Holzschwebetür ist der Untergrund meist zu uneben und das Spiegelbild wird verzerrt angezeigt. Sie können sich gerne beim Velken Kundenservice ein kostenloses Muster dieser Folie anfordern und damit vorab eine Probeverklebung machen.
Velken Service-Team on 30. September 2022
Compose reply
Question:
Haben Sie auch Spiegelfolie zum Spannen, nicht zum kleben, auf einen Rahmen, 200 cm x100cm plus 10cm Umschlag?
Isabell K. am 15. November 2022
Answer:
Spiegelfolie zum Spannen haben wir leider nicht im Sortiment. Allgemein sind die meisten unserer Fensterfolien nur zum Aufkleben auf Flachglasscheiben konzipiert.
Velken Service-Team on 15. November 2022
Compose reply
Question:
Ich möchte diese Folie außen an den Glasfenstern von der Haustüre verwenden. Ist die Folie auch nachts blickdicht, wenn das Licht innen eingeschaltet ist
Werner K. am 10. December 2022
Answer:
Diese Spiegeleffektfolie ist nicht lichtundurchlässig wenn sie auf einem Außenfenster klebt. Abends kann man minimal hindurch sehen, wenn innen Licht an ist. Ein Sichtschutz ist daher nicht gegeben!
Velken Service-Team on 12. December 2022
Compose reply
Question:
Ich habe einen Spiegel der aus 5 Mosaiken besteht. Für meine Tochter ist er DER Spiegel. Nun ist leider das mittlere Mosikstück nach einem Sturz gerissen. Eine Reparatur kommt nicht in Frage, da die Gefahr zu groß ist den Rest auch kaputt zu machen. Die Idee war nun den Spiegel mit Dieser Folie zu überkleben, ist das möglich?
Beatrix K. am 30. January 2023
Answer:
Dies ist möglich. Die Rissstelle wird sich wahrscheinlich unter der Folie in verminderter Form abzeichnen und der Spiegeleffekt wird zumindest an dieser Stelle nicht ganz perfekt aussehen.
Velken Service-Team on 31. January 2023
Compose reply
Question:
Ich bin in eine Dachgeschosswohnung eingezogen. Das Waschbecken, über dem noch kein Spiegel hängt, ist an der Giebelseite, die Dachschräge ist rechts. An diese Wand möchte ich ggf eine Spiegelfolie kleben. Ist die genauso gut geeignet wie ein "richtiger" Spiegel?
Eva S. am 10. June 2023
Answer:
Die Wand wird leider zu uneben sein für die Folie. Alle Unebenheiten zeichnen sich 1:1 in der Folie ab, das Spiegelbild wird dadurch verzerrt. Sie müssten ein Glasscheibe oder Acrylglas als Untergrund vorher anbringen.
Velken Service-Team on 11. June 2023
Compose reply
Question:
Ich würde die Folie im Aussenbereich als Reitspiegel benutzen wollen. Als Untergrund würde ich eine glatte HPL-Platte nutzen. Ist die Folie UV-beständig und wäre somit auch für den Aussenbereich geeignet?
Martin W. am 22. September 2023
Answer:
Die Folie kann auch im Außenbereich eingesetzt werden und ist 3-5 Jahre witterungsbeständig.
Velken Service-Team on 25. September 2023
Compose reply
Question:
Ich würde gerne eine Spiegelfolie auf einen Boiler im Bad anbringen. Ist das möglich?
Angelika k. am 18. November 2023
Answer:
Theoretisch schon, allerdings wird das Spiegelbild vermutlich nicht komplett frei von Verzerrungen sein. Dafür müsste der Untergrund glatt wie Glas sein.
Velken Service-Team on 20. November 2023
Compose reply
Question:
Ich habe eine Praxis und möchte die Folie auf einen Plexiglasscheibe anbringen und in den Trainingsbereich hängen, wäre das möglich?
JP P. am 21. December 2023
Answer:
Das wäre problemlos möglich.
Velken Service-Team on 31. December 2023
Compose reply
Question:
Geht es bei dem glatten Untergrund hauptsächlich um das vermeiden von Verzerrungen oder kann die Folie ausschließlich auf Glas ähnlichen Flächen kleben?
L. A. am 02. January 2024
Answer:
Es geht hauptsächlich um ein verzerrungsfeies Spiegelbild. Die Folie selbst klebt sonst auf allen glatten Untergründen, beispielsweise auf Möbelstücken aus Holz oder Kunststoff.
Velken Service-Team on 03. January 2024
Compose reply
Question:
Ich hätte gerne eine Folie für meine Veranda gegen die Blicke unserer Nachbarn zu schützen. Ist diese Folie so konzipiert das man aber von innen nach außen sehen kann.? Und verliert man viel Durchsicht von innen nach außen?
Karin S. am 11. February 2024
Answer:
Die Spiegelfolien sind dafür nicht geeignet weil einfallendes Licht von beiden Seiten dazu führt, dass sich keine eindeutige Spiegelung zu einer Seite hin bilden kann. In diesem Fall können Sie eine Milchglasfolie mit immer beidseitigem Sichtschutz einsetzen. Häufig dafür benutzt wird die Sichtschutzfolie mit Sandstrahleffekt. Aber auch die anderen Folien in dieser Kategorie wären durchaus geeignet.
Velken Service-Team on 12. February 2024
Compose reply
Question:
Ich möchte einen Teil einer Wand im Wohnzimmer im Essbereich mit selbst zugeschnittenen Formen aus Spiegelfolie optisch aufpeppen, so dass der Raum größer wirkt und als „Eyecatcher“. Ist dies mit dieser Folie möglich?
Evelyn W. am 29. February 2024
Answer:
Das wäre nur möglich wenn Sie unter jeden Zuschnitt ein Stück Glas, Acrylglas oder Plexiglas anbringen. Die Wand alleine wird als Untergrund viel zu uneben sein und es würde sich kein unverzerrtes Spiegelbild einstellen.
Velken Service-Team on 01. March 2024
Compose reply
Question:
Ist die Folie ein guter Spiegel Ersatz? Wie hoch ist die Licht Reflexion?
Florian S. am 11. March 2024
Answer:
Auf dem passenden Untergrund appliziert ist die Folie ein guter Spiegelersatz.
Die Licht Reflexion liegt bei ca. 85%.
Velken Service-Team on 12. March 2024
Compose reply
  Ask new question
Your question will be publicly visible and can - in addition to our support - also be answered by a member of our community.
Reviews 0
Be the first to rate this article!
Write a review now!
Last viewed