Frosted window film - privacy film, white matt
- self-adhesive
- Indoor assembly, Outdoor installation
Price per m² from: €26.84 Price per m²: €24.16 Price per m²: €14.49 incl. VAT plus shipping costs. Item no. 213010
Delivery time approx. 2-4 days
CNC cutting accurate to the millimetre
free assembly tool
| Protection from | Look |
| Privacy screen | high |
| Light transmission | high |
| Transparency | low |
| Design | without |
| Colour | white |
| Liability | self-adhesive |
| Mounting side | Indoor assembly, Outdoor installation |
Start WhatsApp chat
Frosted window film by Velken: Super privacy protection with high light transmission.
This very popular white matt privacy film allows only shadowy outlines to be seen. Thanks to its milky appearance, the view becomes more diffuse with increasing distance. At the same time, the frosted glass film offers the optimum balance between high light transmission and the best possible privacy. The reverse side of this adhesive film is self-adhesive, so it sticks easily to all smooth surfaces such as glass. Alternatively, we also carry frosted glass film, which is self-adhesive.
The window film is used in bathrooms (wet rooms), offices, surgeries and everywhere where privacy is to be protected. You can also use this frosted glass film for decorative purposes. With its frosted glass look, it embellishes any pane or glass in no time at all.
Advantages of this frosted glass film
- easy to install and extremely durable
- the surface is very fine and also scratch-resistant
- it does not shrink and does not wrinkle even after years of use
- the film in frosted glass look is dirt-repellent and easy to clean
- easy to clean with standard glass cleaners
- privacy film can be removed again without leaving any residue
In addition, solar radiation and glare are reduced by the white privacy film. The rejection of total solar energy (heat reduction) is 27%. The UV protection is 94%. This reduces the heating of the rooms slightly, the indoor climate becomes more pleasant and, incidentally, the building can be visually upgraded.
Included in delivery
You should definitely order the transfer concentrate, art. no. 020010 additionally. It makes the installation easier and leads to a better result. Alternatively, you can also use a pH-neutral cleaner. This must be pH-neutral to prevent streaks from forming together with the film adhesive!Any offcuts are not included in the scope of delivery.
Manufacturer's guarantee
The manufacturer provides a 10-year guarantee on this frosted glass film for interior installation. This guarantee relates to flaking and yellowing of the film.
The durability of the frosted glass film for interior installation is up to 15 years in Central Europe, depending on various factors.
| Properties | Outdoor installation | ||
|---|---|---|---|
| Light | Reflection | Indoor | 18% |
| Outdoor | 26% | ||
| Transmission | 69% | ||
| Solar | Reflection | 18% | |
| Absorption | 19% | ||
| Transmission | 63% | ||
| Shading coefficient | 0,80 | ||
| Heat transmission coefficient (U-value) | 5,60 | ||
| Total energy transmittance (g-value) | 0,71 | ||
| Emissivity | n.a. | ||
| UV reduction | 95% | ||
| Glare reduction | 27% | ||
| Total energy rejection (exterior) | 29% | ||
The values of the properties were determined by the film manufacturer. They have been calculated on 3 mm glass using the appropriate methodology and are subject to variations in process conditions in industrial production. They are for estimation purposes only.
| Technical data | |
|---|---|
| Material | Polyester film |
| Film thickness | approx. 50 µm |
| Adhesive | Pressure sensitive adhesive system |
Mounting recommendation
Based on technical data and extensive experience, we can recommend mounting on the following vertically installed glass types:
| Glass type | Number of panes | mainly installed | U-value [W/(m²K)] | Internal installation | Exterior installation |
|---|---|---|---|---|---|
| Single glazing | 1 (-fold) | until 1978 | 5,7 - 5,8 | yes | yes |
| Double glazing | 2 (-fold) 2 (-fold) 3 (-fold) |
1978 - 1994 1995 - Today 1978 - 1994 |
3.0 - 3.4 1.2 - 2.5 2.1 - 2.4 |
yes yes yes |
yes yes yes |
| Thermal insulation glazing | 2 (-fold) 3 (-fold) |
1978 - 1994 1995 - Today |
1.7 - 2.1 0.4 - 1.4 |
yes yes |
yes yes |
| Solar control glazing | 2 (-fold) 2 (-fold) 3 (-fold) |
1978 - 1994 1995 - Today 1995 - Today |
1.4 - 2.0 1.0 - 2.5 0.5 - 1.3 |
yes yes yes |
yes yes yes |
These recommendations may still result in glass breakage due to various factors at the installation site. According to our AGB, §10 paragraph 3 we do not accept any liability for this.
Questions about frosted films
Does this frosted glass film also provide privacy at night?
Yes, with this frosted glass film you have a high level of privacy protection at night as well as during the day. At night, it may be possible to see a shadow of you from outside when the light is on.
If this is not desired, you should switch to our opaque white matt privacy film.
How exactly do I have to imagine the privacy screen?
The easiest way to do this is to look at our product image. There you can see the flower, which is located at a distance of approx. 5 cm behind the frosted glass film. At the moment, the flower can still be seen dimly. If you move the plant further away from the film, it will no longer be visible. The visibility therefore decreases with distance.
Where is this frosted glass film typically used?
This frosted glass film is used everywhere where the view is to be effectively prevented by day and night. For example, in doctors' surgeries, offices, warehouses or also in private homes (kitchen, bathroom or hallway), rented flats, conservatories, etc.
Is the frosted glass film applied inside or outside?
You can apply the privacy film to your window panes both inside and outside. The durability on the inside is naturally somewhat higher, as the weather cannot affect it as it does on the outside.
Is there an alternative frosted glass film without adhesive?
A new addition to our range is the Adhesion Film, Etched Glass Design, Art. no. 281020, which you can use as an alternative. This frosted glass film has a similar milky look with the difference that it does not need any adhesive and sticks to the window pane by static attraction alone.
General questions
Can I get a free film sample?
Of course, please click on this link to access the relevant order form. You are welcome to add to the list of items if you wish. There are no costs for you!
Will you also cut the frosted glass film for me?
We cut every frosted glass film to the exact millimetre according to the dimensions you enter. The cutting is free of charge. You can find detailed instructions on how to measure your panes here.
Alternatively, you can also cut your film by hand with a cutter knife. However, this requires a little manual skill, so you are usually better off using our free service.
Can you also cut a round blank or other geometry?
In general, almost all 2D shapes can be produced. Many geometries (e.g. triangles, trapezoids, circles) can be ordered directly via the online shop. To do so, please click on the orange rectangle to the right of the article image. You can then choose between many different shapes.
For shapes that are not specified, please send us a small sketch (photo) in which you specify the side lengths, radii or angles. Please contact us for this purpose.
Does the frosted glass film also adhere to surfaces other than glass?
The window film adheres to all surfaces that are approximately as smooth as glass. When applying to plastic, please bear in mind that the adhesive may bond with the plastic, making it impossible to remove the film cleanly later.
How can I clean my window pane with a mounted frosted glass film?
You can keep your window pane clean in the normal way. The frosted glass film should not be rubbed with sharp-edged objects (e.g. a brush).
You can find more information in our guide General care instructions for window films.
Can the frosted glass film be removed without leaving any residue?
All frosted glass films can be removed without leaving any residue and without damaging the glass surface!
Below you will find detailed instructions on how to remove old window films.
Can you also print on frosted glass films?
Unfortunately, we do not currently offer film printing and do not have any partner companies with whom we can carry out film printing.
Assembly instructions for Privacy films (self-adhesive)
You will need the following items
- Plastic bottle with hand sprayer, adhesive tape, paper towels (not included)
- Transfer concentrate (not included)
- Glass cleaner (not included) or commercially available glass cleaner
- Installation squeegee and Glass scraper blade (included free of charge in the delivery).
Installation tips
- Two people should carry out the installation!
- Do not install any film at temperatures on the installation side below +6° C.
- Fill the spray bottle with 0.5 litres of water and add the transfer concentrate (30 ml) (enough for approx. 6 to 7 m² of glass surface).
-
Thoroughly clean the glass with commercial or our glass cleaner!
Remove all sticky particles (e.g. paint or fly dirt) preferably with the Glass scraper blade. No dirt residues should remain on the glass! - The sandblasting foil consists of the mostly white backing paper and the actual sandblasting foil.
Now place the sandblasting foil with the view side down on the glass pane or similar. You are now looking at the back of the film.
Then carefully and slowly peel off the backing paper at as shallow an angle as possible until it is about halfway along the entire length of the film. Cut the backing paper and stick it back onto the sandblasting film with a gap of about 2 cm to the remaining backing paper. - Now hold the in place while the 2nd person
starting from the corner, and at the same time spray the adhesive side of the that is now exposed with the liquid.
Afterwards, the glass pane (surface to be pasted) must be sprayed with the liquid. Do not be sparing with the liquid, the film and pane should be well wet. - Place the on the glass, the film should slide back and forth well, otherwise spray the glass again.
- Now spray the other side of the as well, this will make it easier for you to work with the mounting squeegee.
- Now press the liquid out evenly with the mounting squeegee from the centre to the right and to the left. Make sure that there is no residual water left under the film! Repeat this procedure several times to remove even invisible water residues. When doing this, wrap the supplied squeegee with a paper towel to avoid any scratches.
- Carefully wipe the edges and the foil with a soft cloth. If necessary, press the edges again with the mounting squeegee.
- Now let the dry for three days without touching it.
- Wait two weeks before cleaning the film for the first time and never use hard objects (brush or blade) to clean it. Commercially available glass cleaners can be used.
FAQ`s about the installation
Can I carry out the film installation alone?
For larger pieces, it is recommended that two people carry out the installation. This makes it easier to handle the film and place it on the pane.
How can I avoid dust inclusions under the adhesive back side?
In addition, do not lay the after peeling off (covers the adhesive side for transport) on the floor to get it wet. Rather, pull a table nearby to spray the film on. On the floor you will always stir up very fine dust particles, which will then settle on the adhesive side facing upwards. These dust particles can later show up on the pane under the , which is something to avoid.
Can I apply the without transfer concentrate?
We strongly advise against the use of water diluted with detergent. This can lead to streaking due to a reaction with the film adhesive.
Does the film have to be applied perfectly to the glass at the first attempt?
After mounting, small bubbles formed the next day
In any case, you should wait this time and do nothing. In most cases, the blisters disappear all by themselves!
How easy is it to remove the film?
It is possible that residues of the film adhesive remain in some places. These can be soaked with our adhesive remover or acetone and then removed again with a glass scraper or ceramic field scraper. You will find detailed instructions on how to remove window films on our homepage in the FAQ`s.
We will be happy to send you a free sample of this and up to four other films without obligation.
The samples are approx. 9 x 9 cm in size and will be sent to you free of charge and without obligation by letter post.
|
1. select sample (max. 5 pieces)
|
||
|
Frosted window film - privacy film, white matt Art.-Nr. 213010 |
|
|
Please select at least one sample!
|
||
- Germany
- Austria
- Switzerland
- Belgium
- Denmark
- France
- Gibraltar
- Greece
- Ireland
- Italy
- Liechtenstein
- Luxembourg
- Malta
- Monaco
- Netherlands
- Norway
- Poland
- Portugal
- Sweden
- Slovakia
- Slovenia
- Spain
- Czech Republic
- United Kingdom
- United States of America
We have received your foil requests.
The samples are usually sent to you within one working day.
Film specialist, Dirk Bilstein - Application engineer
" I will be happy to give you expert advice on choosing the right film! "
Assembly instructions
Tool for easy assembly
The tool sets and accessories offered by Velken will be very useful for the success of your installation! Adhesive films, electrostatic films, decorative coatings... for each product there is the appropriate tool.
In addition to the assembly video, take a look at the detailed assembly instructions.
Click here to view these question(s).
Wir empfehlen von den gemessenen Glasmaßen in Höhe und Breite je 3 mm ab zu ziehen. So entsteht ein umlaufender folienloser Rand von 1,5 mm zur Glasdichtung. Dieser Folienlose Rand erleichtert Ihnen später das Anbringen der Folie, da diese sich noch leicht justieren lässt.
Wir empfehlen daher die Folien auf der trockenen Seite der Duschwand anzubringen.
Immer wieder verwendbare Sichtschutzfolien finden Sie unter den kleberlose Adhäsionsfolien.
Wenn ja muss man dafür unbedingt das Transfer-Konzentrat besorgen oder kann man die auch mit den anderen Mitteln kleben so dass sie sich später leichter entfernen lässt und man keine Rückstände am Glas sieht?
Soll die Folie entfernt werden kann man sie einfach wieder abziehen. Eventuell vereinzelt zurückbleibende Klebereste können mit Seifenwasser eingeweicht und entfernt werden.
Es steht demnächst ein Umzug bevor & ich würde die gerne „mitnehmen“ solange es möglich ist..