Tile sticker, dark textured oak

  • Indoor assembly
  • self-adhesive
Tile sticker, dark textured oak
Tile sticker, dark textured oak
Tile sticker, dark textured oak
Tile sticker, dark textured oak
Tile sticker, dark textured oak
Available in the dimensions:
min. 5,0 x 5,0 cm
max. 121,0 x 119 cm
Width [cm]
Height [cm]
Cutting possible on request
Unfortunately, your desired size cannot be ordered via the online shop. However, we can still offer you the dimensions. Please ask our customer service at info@velken.shop.
from €0.90 / piece

Price per m²: €29.16 Price per m²: €21.87 incl. VAT plus shipping costs. Item no. 911119

Order accessories directly

This mounting squeegee with soft felt edge is ideally suited for scratch-sensitive film surfaces such as sun protection, safety and protective films.

Mounting squeegee with felt edge

This glass cleaner with anti-soiling effect removes even coarse soiling in no time. The spray bottle makes application easy and clean.

Surface & Glass Cleaner 500 ml

Safety cutting ruler protects fingers & hands: Precisely measure & cut at the same time.

Professional safety ruler, aluminium, 55 cm length

Professional cutter knife which lies very well in the hand when cutting foil. With sliding grid and blade lock.

Professional cutter knife

A wonderful cleaning cloth for surfaces of all kinds! Moisture is absorbed quickly and well.

Microfibre universal cloth
Quantity Unit price
to 24 €0.90
from 25 €0.76
from 50 €0.63
from 100 €0.49
from 251 €0.45

Delivery time approx. 5-7 Days

CNC cutting accurate to the millimetre

free assembly tool

Properties of this film
Mounting side
Indoor assembly
Material thickness
approx. 230 µm
10 years (indoor installation)
light brown
Floor tiles, Wall tiles
Temperature resistant
-20°C to +110°C
Start WhatsApp chat

Let them shine in new splendour!

It's child's play to cover your old, boring bathroom or kitchen tiles with our tile foils in many different decors and colours, perfectly tailored to your size.

The tile foils are primarily intended for the embellishment of wall tiles. Floor tiles can also be embellished to a certain extent, but you should bear in mind that the mechanical stress on the foil, e.g. from walking on it with shoes, can lead to damage to the foil surface.

Furthermore, our tile foils are completely insensitive to moisture. In short, a unique, innovative product that allows you unlimited creativity at low cost.

Advantages of tile foils

  • Cost-efficient: Save a lot of money compared to traditional renovation.
  • 3D deformable: Strongly rounded tile edges can be easily pressed on with a hairdryer.
  • Durable: 10-year guarantee against delamination, cracks, yellowing and other changes in appearance.
  • Hygienic: Quick and easy to clean, prevents mould and staining.

Tested for safety

  • Tested A+ for VOC emissions (volatile organic compounds).
  • Fire resistance rating according to Euroclass B S2 D0 for use in public areas
Important ordering information

The decor of this tile foil runs in the longitudinal direction, i.e. from top to bottom (vertically). Therefore, when entering the dimensions, please ensure that the width and height are not reversed, as otherwise the decor will be rotated by 90°! Please compare the following sketch:

Grain wood foil sketch

Available downloads
Technical data and information at a glance...

Manufacturer's guarantee

The manufacturer provides a 10-year guarantee on this tile foil for interior installation. This warranty covers delamination, cracks, yellowing and other changes in appearance. The durability of the tile film for interior installation is up to 15 years in Central Europe, depending on various factors.

The film has excellent abrasion resistance against acid (ethanol, salt), stains, dirt and mould, except xylene.

How to mount this film on the window...
Start assembly video
Installation video for window films. Click on the picture to start.

Assembly instructions for Tile foils (self-adhesive)

You will need the following items

Installation tips

  • Two people should carry out the installation!
  • Do not install any film at temperatures on the installation side below +6° C.
  1. Fill the spray bottle with 0.5 litres of water and add the transfer concentrate (30 ml) (enough for approx. 6 to 7 m² of glass surface).
  2. Thoroughly clean the glass with commercial or our glass cleaner!
    Remove all sticky particles (e.g. paint or fly dirt) preferably with the Glass scraper blade. No dirt residues should remain on the glass!
  3. The sandblasting foil consists of the mostly white backing paper and the actual sandblasting foil.
    Now place the sandblasting foil with the view side down on the glass pane or similar. You are now looking at the back of the film.
    Then carefully and slowly peel off the backing paper at as shallow an angle as possible until it is about halfway along the entire length of the film. Cut the backing paper and stick it back onto the sandblasting film with a gap of about 2 cm to the remaining backing paper.
  4. Now hold the in place while the 2nd person starting from the corner, and at the same time spray the adhesive side of the that is now exposed with the liquid.
    Afterwards, the glass pane (surface to be pasted) must be sprayed with the liquid. Do not be sparing with the liquid, the film and pane should be well wet.
  5. Place the on the glass, the film should slide back and forth well, otherwise spray the glass again.
  6. Now spray the other side of the as well, this will make it easier for you to work with the mounting squeegee.
  7. Now press the liquid out evenly with the mounting squeegee from the centre to the right and to the left. Make sure that there is no residual water left under the film! Repeat this procedure several times to remove even invisible water residues. When doing this, wrap the supplied squeegee with a paper towel to avoid any scratches.
  8. Carefully wipe the edges and the foil with a soft cloth. If necessary, press the edges again with the mounting squeegee.
  9. Now let the dry for three days without touching it.
  10. Wait two weeks before cleaning the film for the first time and never use hard objects (brush or blade) to clean it. Commercially available glass cleaners can be used.

FAQ`s about the installation

Can I carry out the film installation alone?

Films that are no larger than 1m² can be installed alone without any problems.
For larger pieces, it is recommended that two people carry out the installation. This makes it easier to handle the film and place it on the pane.

How can I avoid dust inclusions under the adhesive back side?

First, clean your windows really thoroughly with glass cleaner. Then go over the entire window pane again with our supplied Glass scraper blade to remove any hard-core impurities on the pane (such as fly droppings). These fine stains are often invisible to the naked eye and you will be amazed at what the blade still removes.

In addition, do not lay the after peeling off (covers the adhesive side for transport) on the floor to get it wet. Rather, pull a table nearby to spray the film on. On the floor you will always stir up very fine dust particles, which will then settle on the adhesive side facing upwards. These dust particles can later show up on the pane under the , which is something to avoid.

Can I apply the without transfer concentrate?

Alternatively, you should at least use a pH-neutral cleaner. We do not recommend installation without any additive at all, which increases the gliding properties of the water!

We strongly advise against the use of water diluted with detergent. This can lead to streaking due to a reaction with the film adhesive.

Does the film have to be applied perfectly to the glass at the first attempt?

No, this is not necessary as long as you have sprayed the adhesive side of the window film and your glass sufficiently wet. Due to the moisture, the adhesive has no adhesive effect, which makes it easy to move the film and position it precisely. It is even possible to remove the film from the glass again and reapply it.

After mounting, small bubbles formed the next day

The bubbles consist of residual liquid that was not pressed out from under the film when it was applied. Over time, these run down between the already drying film adhesive as far as they can under the film and collect in some places. The bubbles disappear by themselves when the remaining liquid diffuses through the film to the outside. Depending on the outside temperature and sunlight, this can take up to three or more weeks before the film fits like a second skin.

In any case, you should wait this time and do nothing. In most cases, the blisters disappear all by themselves!

How easy is it to remove the film?

The window film itself can be easily removed. To do this, detach one corner and fold it over directly. The film can then be removed from the glass at as flat an angle as possible.

It is possible that residues of the film adhesive remain in some places. These can be soaked with our adhesive remover or acetone and then removed again with a glass scraper or ceramic field scraper. You will find detailed instructions on how to remove window films on our homepage in the FAQ`s.
Order a product sample...

We will be happy to send you a free sample of this and up to four other films without obligation.
The samples are approx. 9 x 9 cm in size and will be sent to you free of charge and without obligation by letter post.

1. select sample (max. 5 pieces)
Tile sticker, dark textured oak Tile sticker, dark textured oak
Art.-Nr. 911119
Please select at least one sample!
2. Specify shipping address
Flat, floor, etc. (optional)
Here you can find our privacy policy.
Thank you very much!
We have received your foil requests.
The samples are usually sent to you within one working day.
Customer service

Foil expert Martin Siegel - Managing Director

» Do you have any questions about this item? I'm happy to help!«

Tile film, fir
Tile film, fir
€32.40 / m²
Tile film, willow wood
Tile film, willow wood
€32.40 / m²
Tile sticker, light oak
Tile sticker, light oak
€32.40 / m²
Tile film, walnut-tree
Tile film, walnut-tree
€32.40 / m²
Tile film, chestnut
Tile film, chestnut
€32.40 / m²
Tile foil, matt black
Tile foil, matt black
€32.40 / m²
Tile film, elm
Tile film, elm
€32.40 / m²
Tile film, pine
Tile film, pine
€32.40 / m²
Tile film, spruce
Tile film, spruce
€32.40 / m²
Tile film, willow
Tile film, willow
€32.40 / m²
Tile film, poplar
Tile film, poplar
€32.40 / m²
Tile film, Grey marble
Tile film, Grey marble
€32.40 / m²
Tile film, cement, grey
Tile film, cement, grey
€32.40 / m²
Tile sticker, aged oak
Tile sticker, aged oak
€32.40 / m²
Tile film, dark wenge
Tile film, dark wenge
€32.40 / m²
Tile foil, brown
Tile foil, brown
€32.40 / m²
Tile film, aged acacia
Tile film, aged acacia
€32.40 / m²
Tile film, lime dark
Tile film, lime dark
€32.40 / m²
Questions about the item1
1 Question(s) in other languages.
Click here to view these question(s).
Kann man die Fliesenfolie auch auf unebene Fliesenbordüre kleben?
Maureen W. am 25. February 2024
Das geht schon nur zeichnet sich der unebene Untergrund in der Folie ab. Dazu ist die Klebkraft gemindert, weil die Folie weniger Kontaktfläche zum Untergrund hat.
Velken Service-Team on 26. February 2024
Compose reply
  Ask new question
Your question will be publicly visible and can - in addition to our support - also be answered by a member of our community.
Reviews 0
Be the first to rate this article!
Write a review now!
Last viewed