Decorative film, broken glass look

(38)
  • self-adhesive
  • Indoor assembly, Outdoor installation
Decorative film, broken glass look
Montagevideo starten
Bruchglasoptik Sichtschutzfolie weiß matt
Fensterfolie in Optik "zerbrochenes Glas"
Klebefolie Bruchglasoptik
Küchefenster mit Sichtschutzfolie in Bruchglasoptik
Bruchglasoptik Fensterfolie als Zuschnitt nach Maß
Kinderzimmer mit Fensterfolie in Bruchglasdesign
Fensterfolie in Bruchlgas Optik
Fenster Sichtschutzfolie in Bruchglasoptik
Dekorfolie in der Optik von Bruchglas auf einer Zimmertür, unten mit Milchglasfolie foliert
Dachfenster mit Dekorfolie in Bruchglasoptik foliert
Fensterfolie Bruchglas
Dekofolie in moderner Bruchglasoptik
Fensterfolie in Bruchlgasoptik
Dekorfolie mit Bruchlgasoptik
Dekorfolie in Bruchglasoptik Detailansicht
Sichtschutzfolie in Bruchglasoptik auf einem Dppelfenster
Zimmertür mit Sichtschutzfolie in Bruchglas Optik
Dekorfolie Bruchglasoptik auf einem Fenster montiert
Geometry Linear metre
Rectangle
Square
Pentagon with slope
Rectangle with bevel
Rectangle with two slopes
symmetric trapezoid
right triangle
symmetrical triangle
Gable window
Rectangle with segmental arch
Rectangle with basket arch
Rectangle with semicircle
Quarter circle
Circle
Semicircle
Circle section
Oval / Ellipse
Available in the dimensions:
min. 5,0 x 5,0 cm
max. 151 x 3.050,0 cm
Width [cm]
Height [cm]
from €1.00

Price per m² from: €23.90 Price per m²: €21.51 Price per m²: €23.90 incl. VAT plus shipping costs. Item no. 223580

Order accessories directly

Facilitates the installation of window films immensely! The films can be positioned on the glass without sticking. The concentrate is sufficient for an area of approx. 6m². The appropriate quantity is offered in the shopping basket.

Transfer concentrate
€3.40

This installation set is suitable for smaller film installations of only a few windows with an area of around 1m² each. The set price saves you over 15% compared to the individual components.

Mounting set
€4.95

This installation set is ideal for medium-sized film installations of up to five windows with a maximum area of 2m² each . You save almost 23% with this bundle compared to the individual components.

Assembly set professional
€9.95

Delivery time approx. 2-4 days

CNC cutting accurate to the millimetre

free assembly tool

Questionst?
Start WhatsApp chat
This privacy film transforms your window into a look that mimics broken glass. The clean lines...

This privacy film transforms your window into a look that mimics broken glass. The clean lines create a modern design.

Thus, this decorative film can protect you from prying eyes under certain circumstances, while still allowing you to look out. However, due to the clear, light-coloured film parts, the privacy protection cannot fulfil the quality of a privacy film. It beautifies the window pane, does not shrink and does not wrinkle even after years. The quality of this film is not comparable to DIY films.

This film can be used wherever a decorative, light privacy screen is primarily desired. When used in the bathroom or WC, the privacy protection may not be sufficient under certain circumstances.
The scratch-resistant surface of the decorative film makes it easy to clean with standard glass cleaners. It is dirt-repellent and easy to clean.

Included in delivery

You should definitely order the transfer concentrate, art. no. 020010 additionally. It makes the installation easier and leads to a better result. Alternatively, you can also use a pH-neutral cleaner. This must be pH-neutral to prevent streaks from forming together with the film adhesive!

Any offcuts are not included in the scope of delivery.

Technical data and information at a glance...

Manufacturer's warranty

The manufacturer provides a 10-year guarantee on this privacy film for indoor installation. This guarantee refers to flaking and yellowing of the film.

The durability of the films for interior installation is up to 15 years in Central Europe, depending on various factors.

Technical data
Material Polyester film (PET)
Film thickness approx. 36 µm
Adhesive Pressure sensitive adhesive system

Mounting recommendation

Based on technical data and extensive experience, we can recommend mounting on the following vertically installed glass types:

Glass typeNumber of
panes
mainly
installed
U-value
W/(m²K)
Internal
installation
Exterior
installation
Single glazing 1 (-fold) until 1978 5,7 - 5,8 yes yes
Double glazing 2 (-fold)
2 (-fold)
3 (-fold)
1978 - 1994
1995 - Today
1978 - 1994
3.0 - 3.4
1.2 - 2.5
2.1 - 2.4
yes
yes
yes
yes
yes
yes
Thermal insulation glazing 2 (-fold)
3 (-fold)
1978 - 1994
1995 - Today
1.7 - 2.1
0.4 - 1.4
yes
no
yes
yes
Solar control glazing 2 (-fold)
2 (-fold)
3 (-fold)
1978 - 1994
1995 - Today
1995 - Today
1.4 - 2.0
1.0 - 2.5
0.5 - 1.3
yes
yes
no
yes
yes
yes

These recommendations can still lead to glass breakage due to various factors at the installation site. In accordance with our AGB, §10 paragraph 3, we accept no liability for this.

Answers to the most frequently asked questions...

General questions

Can I get a free foil sample?

Of course, please click on this link to access the corresponding order form. You are welcome to add to the list of items if you wish. There are no costs for you!

Will you also cut the film for me?

We cut each film to the exact millimetre according to the dimensions you enter. The cutting is free of charge. You can find detailed instructions on how to measure your panes here.

Alternatively, you can also cut your film by hand with a cutter knife. However, this requires a little manual skill, so you are usually better off using our free service.

Can you also cut a round blank or other geometry?

In general, almost all 2D shapes can be produced. Many geometries (e.g. triangles, trapezoids, circles) can be ordered directly via the online shop. To do so, please click on the orange rectangle to the right of the article image. You can then choose between many different shapes.

For shapes that are not specified, please send us a small sketch (photo) in which you specify the side lengths, radii or angles. Please contact us for this purpose.

Does the film also adhere to surfaces other than glass?

The window film adheres to all surfaces that are approximately as smooth as glass. When applying the film to plastic, please bear in mind that the adhesive may bond with the plastic, making it impossible to remove the film cleanly later.

How can I clean my window pane with the film in place?

You can keep your window pane clean as usual. The film should not be rubbed with sharp-edged objects (e.g. a brush).
You can find more information in our guide General care instructions for window films.

Can the film be removed without leaving any residue?

All window films can be removed without leaving any residue and without damaging the glass surface!
Below you will find detailed instructions on how to remove old window films.

Can you also print on films?

Unfortunately, we do not currently offer foil printing and do not have any partner companies with whom we can realise foil printing.

How to mount this film on the window...
Montagevideo starten
Installation video for window films. Click on the picture to start.

Assembly instructions for Privacy films (self-adhesive)

You will need the following items

  • Plastic bottle with spray head or with hand sprayer, adhesive tape, paper towels (not included)
  • Transfer concentrate (not included)
  • Glass cleaner (not included)
  • or commercially available glass cleaner
  • Installation squeegee and glass scraper blade (included free of charge in the delivery)
  • .

    Installation tips

    • Two people should carry out the installation!
    • Do not install any film at temperatures on the installation side below +6° C.
    1. Fill the spray bottle with 0.5 litres of water and add the transfer concentrate (30 ml) (enough for approx. 6 to 7 m² of glass surface).
    2. Thoroughly clean the glass with commercial or our glass cleaner!
      Remove all sticky particles (e.g. paint or fly dirt) preferably with the glass scraper blade
    3. . No dirt residues should remain on the glass!
    4. The sandblasting foil consists of the mostly white backing paper and the actual sandblasting foil.
      Now place the sandblasting foil with the view side down on the glass pane or similar. You are now looking at the back of the film.
      Then carefully and slowly peel off the backing paper at as shallow an angle as possible until it is about halfway along the entire length of the film. Cut the backing paper and stick it back onto the sandblasting film with a gap of about 2 cm to the remaining backing paper.
    5. Now hold the in place while the 2nd person starting from the corner, and at the same time spray the adhesive side of the that is now exposed with the liquid.
      Afterwards, the glass pane (surface to be pasted) must be sprayed with the liquid. Do not be sparing with the liquid, the film and pane should be well wet.
    6. Place the on the glass, the film should slide back and forth well, otherwise spray the glass again.
    7. Now spray the other side of the as well, this will make it easier for you to work with the mounting squeegee.
    8. Now press the liquid out evenly with the mounting squeegee from the centre to the right and to the left. Make sure that there is no residual water left under the film! Repeat this procedure several times to remove even invisible water residues. When doing this, wrap the supplied squeegee with a paper towel to avoid any scratches.
    9. Carefully wipe the edges and the foil with a soft cloth. If necessary, press the edges again with the mounting squeegee.
    10. Now let the dry for three days without touching it.
    11. Wait two weeks before cleaning the film for the first time and never use hard objects (brush or blade) to clean it. Commercially available glass cleaners can be used.

    FAQ`s about the installation

    Can I carry out the film installation alone?

    Films that are no larger than 1m² can be installed alone without any problems.
    For larger pieces, it is recommended that two people carry out the installation. This makes it easier to handle the film and place it on the pane.

    How can I avoid dust inclusions under the adhesive back side?

    First, clean your windows really thoroughly with glass cleaner. Then go over the entire window pane again with our supplied glass scraper blade to remove any hard-core impurities on the pane (such as fly droppings). These fine stains are often invisible to the naked eye and you will be amazed at what the blade still removes.

    In addition, do not lay the after peeling off (covers the adhesive side for transport) on the floor to get it wet. Rather, pull a table nearby to spray the film on. On the floor you will always stir up very fine dust particles, which will then settle on the adhesive side facing upwards. These dust particles can later show up on the pane under the , which is something to avoid.

    Can I apply the without transfer concentrate?

    Alternatively, you should at least use a pH-neutral cleaner. We do not recommend installation without any additive at all, which increases the gliding properties of the water!

    We strongly advise against the use of water diluted with detergent. This can lead to streaking due to a reaction with the film adhesive.

    Does the film have to be applied perfectly to the glass at the first attempt?

    No, this is not necessary as long as you have sprayed the adhesive side of the window film and your glass sufficiently wet. Due to the moisture, the adhesive has no adhesive effect, which makes it easy to move the film and position it precisely. It is even possible to remove the film from the glass again and reapply it.

    After mounting, small bubbles formed the next day

    The bubbles consist of residual liquid that was not pressed out from under the film when it was applied. Over time, these run down between the already drying film adhesive as far as they can under the film and collect in some places. The bubbles disappear by themselves when the remaining liquid diffuses through the film to the outside. Depending on the outside temperature and sunlight, this can take up to three or more weeks before the film fits like a second skin.

    In any case, you should wait this time and do nothing. In most cases, the blisters disappear all by themselves!

    How easy is it to remove the film?

    The window film itself can be easily removed. To do this, detach one corner and fold it over directly. The film can then be removed from the glass at as flat an angle as possible.

    It is possible that residues of the film adhesive remain in some places. These can be soaked with our adhesive remover or acetone and then removed again with a glass scraper or ceramic field scraper. You will find detailed instructions on how to remove window films on our homepage in the FAQ`s.
Order a product sample...

We will be happy to send you a free sample of this and up to four other films without obligation.
The samples are approx. 9 x 9 cm in size and will be sent to you free of charge and without obligation by letter post.

1. select sample (max. 5 pieces)
Decorative film, broken glass look Decorative film, broken glass look
Art.-Nr. 223580
Please select at least one sample!
2. Specify shipping address
Flat, floor, etc. (optional)
Germany
I accept the privacy policy.
Thank you very much!
We have received your foil requests.
The samples are usually sent to you within one working day.

Assembly instructions

Montagevideo starten
Installation video for window films. Click on the image to start.

Tool for easy assembly

The tool sets and accessories offered by Velken will be very useful for the success of your installation! Adhesive films, electrostatic films, decorative coatings... for each product there is the appropriate tool.

In addition to the assembly video, take a look at the detailed assembly instructions.

- 30 %
Assembly set professional
(86)
This installation set is ideal for medium-sized film installations of up to five windows with a maximum area of 2m² each . You save almost 23% with this bundle compared to the individual components.
040020 - Assembly set professional
€14.25 €9.95
Decorative film, horiz. transp. white stripes, width 3 mm u. 30 mm
(23)
  • Indoor assembly
  • self-adhesive
Privacy screen by day and night:
Light transmission:
€23.90 / m²
Decorative film, horizontal white stripes of different widths
(4)
  • Indoor assembly
  • self-adhesive
Privacy screen by day and night:
Light transmission:
€23.90 / m²
Decorative film, white squares 19 mm
(2)
  • Indoor assembly
  • self-adhesive
Privacy screen by day and night:
Light transmission:
€23.90 / m²
NEW
Frosted window film - privacy film, white matt
  • Indoor assembly
  • self-adhesive
Privacy screen by day and night:
Light transmission:
€26.84 / m²
- 30 %
- 22 %
Mounting set
(27)
Mounting set
€6.35 €4.95
Questions & Answers
No questions have been asked so far.
Ask a question
Your question will be publicly visible and can - in addition to our support - also be answered by a member of our community. answered by a member of our community. You can enter your publicly visible name and your email notifications in your customer account. configure.
Reviews 38

Customer reviews

∅ 4,8   from 5 stars for 38 ratings
5 Stars
(34)
4 Stars
(3)
3 Stars
(0)
2 Stars
(0)
1 Star
(1)
Write a review now!
2 month agoVerified purchase
Das Produkt hat hervorragend gepasst

Lieferung sehr schnell
Super Anleitung
Durch das Montageset hervorragend funktioniert
Tolle Auswahl
Preis Leistung passt sehr gut
Beim nächsten mal würde ich es wieder gleich machen

2 month agoVerified purchase
Sichtschutz Folien

Riesige Auswahl
Tolle Desings
Problemloses auswählen
Rasche Lieferung
Einfache Montage durch super Anleitung
Preis passt auch
Habe schon mehrmals bei Velken bestellt

3 month agoVerified purchase
Zweite Bestellung und wieder alles top

Wir hatten bei der ersten Bestellung zunächst die Folie für kleinere Fenster bestellt. Nachdem dies so super funktioniert hatte, haben wir uns an unser großes Fenster und zwei Terassentüren getraut. Auch mit diesen großen Folien hat alles super funktioniert und es sieht toll aus!

3 month agoVerified purchase
Dekorfolie Bruchglasoptik

Ich bin total zufrieden mit der Folie!
Das Anbringen dank des "Wundermittels" Transfer Konzentrat war sehr einfach und ich konnte die Folie alleine anbringen.

3 month agoVerified purchase
Super!

Wir haben jetzt schon mehrmals bestellt und immer wieder sind wir sehr zufrieden! Die Bestellung, der super verpackte Versand und auch dann die leichte, mit dem passenden Zubehör, Anbringung, einfach klasse!

3 month agoVerified purchase
Dekorfolie Bruchglasoptik

Die Folie sieht super aus und ist eine super Qualität.
Lässt sich ganz einfach mit dem mitgelieferten Zubehör anbringen.
Einfach perfekt

3 month agoVerified purchase
Super!

Sieht super aus und passt perfekt! Zuschnitt ist gut und die Folie lässt sich passgenau verarbeiten. Das mitgelieferte Zubehör reicht aus.

3 month agoVerified purchase
Tolle Dekorfolie

Lieferung, Montage alles hat super geklappt und für eine frau auch alleine gut machbar.
Sieht sehr gut aus . Kann ich nur weiter empfehlen, dies ist schon meine 3 Bestellung. Die Folie dient als Sichtschutz in dem Kinderzimmer.

6 month agoVerified purchase
Mega schöne Folie und super zu verarbeiten

Wir hatten zunächst ein wenig Sorge, ob wir die Folie vernünftig ans Fenster bekommen. Dies war jedoch überhaupt kein Problem! Das Maß war perfekt zugeschnitten und die Montage lief zu zweit auch super gut. Sehr zu empfehlen. Die Qualität überzeugt!

7 month agoVerified purchase
Folie

Bestellung Lieferung Montage alles hat super geklappt und sieht gut aus . Kann ich nur weiter empfehlen. Die Folie dient als Sichtschutz an der Haustür.

Last viewed