Decorative film, transp. white autumn forest

(16)
  • self-adhesive
  • Indoor assembly, Outdoor installation
Decorative film, transp. white autumn forest
Montagevideo starten
Sichtschutz Klebefolie Herbstwald
Glastür Klebefolie Herbstwald
Dekorfolie, Herbstwald
Sichtschutzfolie mit Herbstwald Motiv
Fensterfolie mit Herbstwald
Fensterfolie mit Waldoptik
Sichtschutz am Fenster mit Folie im Design Herbstwald
selbstklebende Dekorfolie in Waldoptik für Fensterglas
Dekorfolie transparent weißer Herbstwald
Geometry Linear metre
Rectangle
Square
Pentagon with slope
Rectangle with bevel
Rectangle with two slopes
symmetric trapezoid
right triangle
symmetrical triangle
Gable window
Rectangle with segmental arch
Rectangle with basket arch
Rectangle with semicircle
Quarter circle
Circle
Semicircle
Circle section
Oval / Ellipse
Available in the dimensions:
min. 5,0 x 5,0 cm
max. 3.050,0 x 151 cm
Width [cm]
Height [cm]
from €1.00

Price per m² from: €23.90 Price per m²: €21.51 Price per m²: €23.90 incl. VAT plus shipping costs. Item no. 223534

Order accessories directly

Facilitates the installation of window films immensely! The films can be positioned on the glass without sticking. The concentrate is sufficient for an area of approx. 6m². The appropriate quantity is offered in the shopping basket.

Transfer concentrate
€3.40

This installation set is suitable for smaller film installations of only a few windows with an area of around 1m² each. The set price saves you over 15% compared to the individual components.

Mounting set
€4.95

This installation set is ideal for medium-sized film installations of up to five windows with a maximum area of 2m² each . You save almost 23% with this bundle compared to the individual components.

Assembly set professional
€9.95

Delivery time approx. 2-4 days

CNC cutting accurate to the millimetre

free assembly tool

Properties of this film
Protection from
Look
Privacy screen
low
Light transmission
high
Transparency
medium
Design
Motifs
Colour
transparent, white
Liability
self-adhesive
Mounting side
Indoor assembly, Outdoor installation
Questionst?
Start WhatsApp chat
This decorative foil in the design of an autumnal forest convinces with its simple elegance. The...

This decorative foil in the design of an autumnal forest convinces with its simple elegance. The deciduous trees in various sizes create a homogeneous look that radiates a certain calm.

Under certain circumstances, this decorative film can protect you from prying eyes while still allowing you to look out. However, due to the clear, light-coloured film parts, the privacy protection cannot fulfil the quality of a privacy film. It beautifies the window pane, does not shrink and does not wrinkle even after years. The quality of this film is not comparable to DIY films.

This film can be used wherever a decorative, light privacy screen is primarily desired. When used in the bathroom or WC, the privacy protection may not be sufficient under certain circumstances.
The scratch-resistant surface of the decorative film makes it easy to clean with standard glass cleaners. It is dirt-repellent and easy to clean.

Included in delivery

You should definitely order the transfer concentrate, art. no. 020010 additionally. It makes the installation easier and leads to a better result. Alternatively, you can also use a pH-neutral cleaner. This must be pH-neutral to prevent streaks from forming together with the film adhesive!

Any offcuts are not included in the scope of delivery.

Technical data and information at a glance...

Manufacturer's warranty

The manufacturer provides a 10-year guarantee on this privacy film for indoor installation. This guarantee refers to flaking and yellowing of the film.

The durability of the films for interior installation is up to 15 years in Central Europe, depending on various factors.

Technical data
Material Polyester film (PET)
Film thickness approx. 36 µm
Adhesive Pressure sensitive adhesive system

Mounting recommendation

Based on technical data and extensive experience, we can recommend mounting on the following vertically installed glass types:

Glass typeNumber of
panes
mainly
installed
U-value
W/(m²K)
Internal
installation
Exterior
installation
Single glazing 1 (-fold) until 1978 5,7 - 5,8 yes yes
Double glazing 2 (-fold)
2 (-fold)
3 (-fold)
1978 - 1994
1995 - Today
1978 - 1994
3.0 - 3.4
1.2 - 2.5
2.1 - 2.4
yes
yes
yes
yes
yes
yes
Thermal insulation glazing 2 (-fold)
3 (-fold)
1978 - 1994
1995 - Today
1.7 - 2.1
0.4 - 1.4
yes
no
yes
yes
Solar control glazing 2 (-fold)
2 (-fold)
3 (-fold)
1978 - 1994
1995 - Today
1995 - Today
1.4 - 2.0
1.0 - 2.5
0.5 - 1.3
yes
yes
no
yes
yes
yes

These recommendations may still result in glass breakage due to various factors at the installation site. According to our AGB, §10 paragraph 3 we do not accept any liability for this.

Answers to the most frequently asked questions...

General questions

Can I get a free foil sample?

Of course, please click on this link to access the corresponding order form. You are welcome to add to the list of items if you wish. There are no costs for you!

Will you also cut the film for me?

We cut each film to the exact millimetre according to the dimensions you enter. The cutting is free of charge. You can find detailed instructions on how to measure your panes here.

Alternatively, you can also cut your film by hand with a cutter knife. However, this requires a little manual skill, so you are usually better off using our free service.

Can you also cut a round blank or other geometry?

In general, almost all 2D shapes can be produced. Many geometries (e.g. triangles, trapezoids, circles) can be ordered directly via the online shop. To do so, please click on the orange rectangle to the right of the article image. You can then choose between many different shapes.

For shapes that are not specified, please send us a small sketch (photo) in which you specify the side lengths, radii or angles. Please contact us for this purpose.

Does the film also adhere to surfaces other than glass?

The window film adheres to all surfaces that are approximately as smooth as glass. When applying the film to plastic, please bear in mind that the adhesive may bond with the plastic, making it impossible to remove the film cleanly later.

How can I clean my window pane with the film in place?

You can keep your window pane clean as usual. The film should not be rubbed with sharp-edged objects (e.g. a brush).
You can find more information in our guide General care instructions for window films.

Can the film be removed without leaving any residue?

All window films can be removed without leaving any residue and without damaging the glass surface!
Below you will find detailed instructions on how to remove old window films.

Can you also print on films?

Unfortunately, we do not currently offer foil printing and do not have any partner companies with whom we can realise foil printing.

How to mount this film on the window...
Montagevideo starten
Installation video for window films. Click on the picture to start.

Assembly instructions for Privacy films (self-adhesive)

You will need the following items

  • Plastic bottle with spray head or with hand sprayer, adhesive tape, paper towels (not included)
  • Transfer concentrate (not included)
  • Glass cleaner (not included) or commercially available glass cleaner
  • Installation squeegee and glass scraper blade (included free of charge in the delivery).
  • Installation tips

    • Two people should carry out the installation!
    • Do not install any film at temperatures on the installation side below +6° C.
    1. Fill the spray bottle with 0.5 litres of water and add the transfer concentrate (30 ml) (enough for approx. 6 to 7 m² of glass surface).
    2. Thoroughly clean the glass with commercial or our glass cleaner!
      Remove all sticky particles (e.g. paint or fly dirt) preferably with the glass scraper blade. No dirt residues should remain on the glass!
    3. The sandblasting foil consists of the mostly white backing paper and the actual sandblasting foil.
      Now place the sandblasting foil with the view side down on the glass pane or similar. You are now looking at the back of the film.
      Then carefully and slowly peel off the backing paper at as shallow an angle as possible until it is about halfway along the entire length of the film. Cut the backing paper and stick it back onto the sandblasting film with a gap of about 2 cm to the remaining backing paper.
    4. Now hold the in place while the 2nd person starting from the corner, and at the same time spray the adhesive side of the that is now exposed with the liquid.
      Afterwards, the glass pane (surface to be pasted) must be sprayed with the liquid. Do not be sparing with the liquid, the film and pane should be well wet.
    5. Place the on the glass, the film should slide back and forth well, otherwise spray the glass again.
    6. Now spray the other side of the as well, this will make it easier for you to work with the mounting squeegee.
    7. Now press the liquid out evenly with the mounting squeegee from the centre to the right and to the left. Make sure that there is no residual water left under the film! Repeat this procedure several times to remove even invisible water residues. When doing this, wrap the supplied squeegee with a paper towel to avoid any scratches.
    8. Carefully wipe the edges and the foil with a soft cloth. If necessary, press the edges again with the mounting squeegee.
    9. Now let the dry for three days without touching it.
    10. Wait two weeks before cleaning the film for the first time and never use hard objects (brush or blade) to clean it. Commercially available glass cleaners can be used.

    FAQ`s about the installation

    Can I carry out the film installation alone?

    Films that are no larger than 1m² can be installed alone without any problems.
    For larger pieces, it is recommended that two people carry out the installation. This makes it easier to handle the film and place it on the pane.

    How can I avoid dust inclusions under the adhesive back side?

    First, clean your windows really thoroughly with glass cleaner. Then go over the entire window pane again with our supplied glass scraper blade to remove any hard-core impurities on the pane (such as fly droppings). These fine stains are often invisible to the naked eye and you will be amazed at what the blade still removes.

    In addition, do not lay the after peeling off (covers the adhesive side for transport) on the floor to get it wet. Rather, pull a table nearby to spray the film on. On the floor you will always stir up very fine dust particles, which will then settle on the adhesive side facing upwards. These dust particles can later show up on the pane under the , which is something to avoid.

    Can I apply the without transfer concentrate?

    Alternatively, you should at least use a pH-neutral cleaner. We do not recommend installation without any additive at all, which increases the gliding properties of the water!

    We strongly advise against the use of water diluted with detergent. This can lead to streaking due to a reaction with the film adhesive.

    Does the film have to be applied perfectly to the glass at the first attempt?

    No, this is not necessary as long as you have sprayed the adhesive side of the window film and your glass sufficiently wet. Due to the moisture, the adhesive has no adhesive effect, which makes it easy to move the film and position it precisely. It is even possible to remove the film from the glass again and reapply it.

    After mounting, small bubbles formed the next day

    The bubbles consist of residual liquid that was not pressed out from under the film when it was applied. Over time, these run down between the already drying film adhesive as far as they can under the film and collect in some places. The bubbles disappear by themselves when the remaining liquid diffuses through the film to the outside. Depending on the outside temperature and sunlight, this can take up to three or more weeks before the film fits like a second skin.

    In any case, you should wait this time and do nothing. In most cases, the blisters disappear all by themselves!

    How easy is it to remove the film?

    The window film itself can be easily removed. To do this, detach one corner and fold it over directly. The film can then be removed from the glass at as flat an angle as possible.

    It is possible that residues of the film adhesive remain in some places. These can be soaked with our adhesive remover or acetone and then removed again with a glass scraper or ceramic field scraper. You will find detailed instructions on how to remove window films on our homepage in the FAQ`s.
Order a product sample...

We will be happy to send you a free sample of this and up to four other films without obligation.
The samples are approx. 9 x 9 cm in size and will be sent to you free of charge and without obligation by letter post.

1. select sample (max. 5 pieces)
Decorative film, transp. white autumn forest Decorative film, transp. white autumn forest
Art.-Nr. 223534
Please select at least one sample!
2. Specify shipping address
Flat, floor, etc. (optional)
Germany
Here you can find our privacy policy.
Thank you very much!
We have received your foil requests.
The samples are usually sent to you within one working day.
Compare articles
Privacy screen
Privacy screen (daytime)
Light transmission
Transparency
Design
Property
Colour
Mounting side
UV protection - percent
Durability

Assembly instructions

Montagevideo starten
Installation video for window films. Click on the image to start.

Tool for easy assembly

The tool sets and accessories offered by Velken will be very useful for the success of your installation! Adhesive films, electrostatic films, decorative coatings... for each product there is the appropriate tool.

In addition to the assembly video, take a look at the detailed assembly instructions.

- 30 %
Assembly set professional
(90)
This installation set is ideal for medium-sized film installations of up to five windows with a maximum area of 2m² each . You save almost 23% with this bundle compared to the individual components.
040020 - Assembly set professional
€14.25 €9.95
Decorative film, horiz. transp. white stripes, width 3 mm u. 30 mm
  • Indoor assembly
  • self-adhesive
Privacy screen by day and night:
Light transmission:
€23.90 / m²
Decorative film, horizontal white stripes of different widths
  • Indoor assembly
  • self-adhesive
Privacy screen by day and night:
Light transmission:
€23.90 / m²
Decorative film, white squares 19 mm
  • Indoor assembly
  • self-adhesive
Privacy screen by day and night:
Light transmission:
€23.90 / m²
Frosted window film - privacy film, white matt
  • Indoor assembly
  • self-adhesive
Privacy screen by day and night:
Light transmission:
€26.84 / m²
Glasdekor Blumenwiese weiß matt
  • Indoor assembly
  • self-adhesive
from €39.90
Fenstertattoo Baum und Vögel weiß matt
  • Indoor assembly
  • self-adhesive
from €29.90
Fenstertattoo Märchenbaum weiß matt
  • Indoor assembly
  • self-adhesive
from €29.90
Fenstertattoo Lebensblume weiß matt
  • Indoor assembly
  • self-adhesive
from €29.90
- 30 %
Assembly set professional
Assembly set professional
€14.25 €9.95
- 22 %
Mounting set
Mounting set
€6.35 €4.95
Undurchsichtige Farbfolie selbstklebend in großer Auswahl
Opaque colour film
€34.18 / m²
NEW
- 30 %
Assembly set professional
Assembly set professional
€14.25 €9.95
- 22 %
Mounting set
Mounting set
€6.35 €4.95
Questions about the item
No questions have been asked so far.
Ask a question
Your question will be publicly visible and can - in addition to our support - also be answered by a member of our community. answered by a member of our community. You can enter your publicly visible name and your email notifications in your customer account. configure.
Reviews 16

Customer reviews

∅ 4,8   from 5 stars for 16 ratings
5 Stars
(15)
4 Stars
(0)
3 Stars
(0)
2 Stars
(0)
1 Star
(1)
Write a review now!
2 weeks agoVerified purchase
Sehr schöne Optik

Die Folie sieht an unseren beiden nebeneinanderliegenden Schlafzimmerfenstern von innen wie von außen sehr schön aus. Der Sichtschutz von außen ist tagsüber sehr gut, abends wenn das Zimmer beleuchtet ist kommt noch ein dünnes Innenrollo zum Einsatz.
Die Folie ist sehr dünn, sodass wir die Schutzfolie erst nicht `gefunden` haben. Auch die Montage der ersten Folie war kniffelig, eben weil sie so dünn ist und durch den Kleber auch schnell aneinander klebte... Aber trotzdem haben wir sie noch gut aufs Fenster bekommen. Bei der zweiten Folie ging es dann deutlich besser und viel schneller.
Wenn man sich an die Montagehinweise hält und alle sehr nass macht, dann geht es auch wirklich gut zu montieren. Zufrieden!

2 month agoVerified purchase
Spiegelfolien

Die Bestellmöglichkeit ist einfach und professionell aufbereitet - die Montageanleitungen sind gut und verständlich.
Die Qualität der Produkte überzeugt. Vor allem sind die Folien wesentlich einfacher, als die Glasflächen zu reinigen.
Wir kaufen wieder!!!

4 month agoVerified purchase
Passt und sieht gut aus

Die Fenster in unserem Gartenhaus sahen immer wie ein "schwarzes Loch" aus, was dem Gesamteindruck des Gartenhauses nicht angemessen war. Mit der Folie hat sich das geändert.
Die Folie selbst musste vorsichtig, und mit 2 Personen angebracht werden.
Die Verarbeitung ist aber okay.
Das Fenster sieht nun prima aus.

5 month agoVerified purchase
Sehr schöne Deko-Folie

Wir haben die Folie für unser Küchenfenster mit Blick auf die Straße bestellt. Sie sieht toll aus! Die Lieferung war schnell und der Folienzuschnitt passt perfekt. Dank der beiliegenden Montageanleitung ließ sich die Folie problemlos anbringen.

9 month agoVerified purchase
Carmen Maria

Ich kannte VELKEN nicht, bin durch Zufall auf Euch gekommen, ein total gutes Gespräch am Telefon hat mich noch bestätigt. Die Folie ist wunderschön, ein echter Blickfang und für mich somit eine Freude in meinem Zimmer

10 month agoVerified purchase
top

Lieferung sehr schnell. Folie wie bestellt geliefert. Die Folie ist dünn, läßt sich gut anbringen, wir haben uns an die Anleitung gehalten.

12 month agoVerified purchase
Dekorfolie transparent-weißer Herbstwald

Artikel ist super bin sehr zufrieden werde für mein zweites Fenster diese Folie auch noch bestellen mit zwei Personen gut an zu bringen.

one year agoVerified purchase
Gefällt mir gut

Ich habe diese Folie (und weitere speziell auf Maß geschnittene Folien) im Dezember 2018 gekauft und angebracht, es war das erste mal, dass ich mit Folien gearbeitet habe. Dafür bin ich vollkommen zufrieden und die Folie hält immer noch.

Sehr schön sind auch die einfallenden Muster der Abendsonne auf das Plissee oder den Raum.

Da ich sehr zufrieden bin werden weitere Bestellungen wieder an Firma Velken gehen.

2 years agoVerified purchase
Schönes Design

Tolles, ausgefallenes Design, mit Wasser und etwas Spüli super leicht anzubringen. Wir sind mit dem Produkt hinsichtlich Preis-Leistung sehr zufrieden.

2 years agoVerified purchase
Vielen Folien

Mir gefallen die Folien sehr gut und bieten den passenden Sichtschutz. Wirklich tolle Folien. Wir wählten die Folien Herbstwald. Sie kommen bei uns gut zu Geltung.

Last viewed