Whiteboard film, white

  • self-adhesive
  • Indoor assembly
Whiteboardfolie, weiß
Geometry A4 cut Linear metre
Rectangle
Square
Pentagon with slope
Rectangle with bevel
Rectangle with two slopes
symmetric trapezoid
right triangle
symmetrical triangle
Gable window
Rectangle with segmental arch
Rectangle with basket arch
Rectangle with semicircle
Quarter circle
Circle
Semicircle
Circle section
Oval / Ellipse
Available in the dimensions:
min. 5,0 x 5,0 cm
max. 135 x 3.000,0 cm
Width [cm]
Height [cm]
Cutting possible on request
Unfortunately, your desired size cannot be ordered via the online shop. However, we can still offer you the dimensions. Please ask our customer service at info@velken.shop.
from €1.00

Price per m² from: €30.07 Price per m²: €27.06 Price per m²: €30.07 incl. VAT plus shipping costs. Item no. 473001

Order accessories directly

This whiteboard marker is quick-drying, low-odour, dry and residue-free to wipe off whiteboards and closed surfaces such as glass and porcelain.

Edding 360 Whiteboard Marker, black
€1.95

These whiteboard markers in the colours blue, red, black, green have a line width of 1.5-3mm. They are quick-drying, low-odour, dry and can be wiped off whiteboards and closed surfaces such as glass and porcelain without leaving any residue.

Edding 360 Whiteboard Marker, coloured
€6.95
€1.20

Facilitates the installation of window films immensely! The films can be positioned on the glass without sticking. The concentrate is sufficient for an area of approx. 6m². The appropriate quantity is offered in the shopping basket.

Transfer concentrate
€3.49

Delivery time approx. 5-7 Days

CNC cutting accurate to the millimetre

free assembly tool

Properties of this film
Application
Glass, Plastic, Wood
Property
opaque
Colour
white
Liability
self-adhesive
Mounting side
Indoor assembly
Grain
fine
Questionst?
Start WhatsApp chat
With this whiteboard film, you can transform any smooth surface (similar to glass or metal...

With this whiteboard film, you can transform any smooth surface (similar to glass or metal sheets, but not plastered walls) into a board that can be written on with dry-erase markers (for example: Edding 360 Whiteboard Marker) in no time at all.

Ideal for designing writing boards, you can order the film made to measure to fit exactly. The lettering on this film can be wiped dry with any felt-tip pen even after several months. This wipeability is achieved by a lacquering of the PVC surface which is white high-gloss.

The original clean condition can be easily restored with window cleaner.

In the case of painted substrates, bonding may only be carried out on undamaged original paint. In the case of new and/or damaged paintwork, the user assumes all risks during application and removal of the film.

Usable, dry-wipe felt pens
Artline ® Easymark   Foray ® Whiteboard Markers
Bic Velleda ® Whiteboard Markers   Franconia mag write
Bic Velleda ® Whiteboard metallic Markers   Niceday ® whiteboard markers, Ref . 1640275
Bic Velleda ® Whiteboard Clic Pentel Maxiflo   Bic Stephens ® Whiteboard
Bic Velleda ® Liquid Ink   Pilot ® Wytebord Marker
Bic Velleda ® Whiteboard Grip Pentel Easyflo   Q - Connect ® whiteboard marker
Edding ® 363 Whiteboard marker   Texta ® Whiteboard
Edding ® 360 Whiteboard marker   Tratto Memo
Edding ® EcoLine, Ref . 28/4S -
Whiteboard marker set
  TÜL dry erase
Expo ® dry erase      

Included in delivery

You should definitely order the transfer concentrate, art. no. 020010 additionally. It makes the installation easier and leads to a better result. Alternatively, you can also use a pH-neutral cleaner. This must be pH-neutral to prevent streaks from forming together with the film adhesive!

Any offcuts are not included in the scope of delivery.

Technical data and information at a glance...

Manufacturer's guarantee

The manufacturer grants a durability guarantee of 5 years on this whiteboard film for indoor use.

Technical data
Material Polymer PVC film
Film thickness approx. 100 µm
Adhesive Solvent-based acrylic adhesive
Adhesive strength 18 N/25 mm
Dimensional stability < 0,8
Temperature range +5° C to + 40° C
Answers to the most frequently asked questions...

General questions

Can I get a free foil sample?

Of course, please click on this link to access the corresponding order form. You are welcome to add to the list of items if you wish. There are no costs for you!

Will you also cut the film for me?

We cut each film to the exact millimetre according to the dimensions you enter. The cutting is free of charge. You can find detailed instructions on how to measure your panes here.

Alternatively, you can also cut your film by hand with a cutter knife. However, this requires a little manual skill, so you are usually better off using our free service.

Can you also cut a round blank or other geometry?

In general, almost all 2D shapes can be produced. Many geometries (e.g. triangles, trapezoids, circles) can be ordered directly via the online shop. To do so, please click on the orange rectangle to the right of the article image. You can then choose between many different shapes.

For shapes that are not specified, please send us a small sketch (photo) in which you specify the side lengths, radii or angles. Please contact us for this purpose.

Does the film also adhere to surfaces other than glass?

The window film adheres to all surfaces that are approximately as smooth as glass. When applying the film to plastic, please bear in mind that the adhesive may bond with the plastic, making it impossible to remove the film cleanly later.

How can I clean my window pane with the film in place?

You can keep your window pane clean as usual. The film should not be rubbed with sharp-edged objects (e.g. a brush).
You can find more information in our guide General care instructions for window films.

Can the film be removed without leaving any residue?

All window films can be removed without leaving any residue and without damaging the glass surface!
Below you will find detailed instructions on how to remove old window films.

Can you also print on films?

Unfortunately, we do not currently offer foil printing and do not have any partner companies with whom we can realise foil printing.

How to mount this film on the window...
Montagevideo starten
Installation video for window films. Click on the picture to start.

Assembly instructions for Surface films (self-adhesive)

You will need the following items

Installation tips

  • Two people should carry out the installation!
  • Do not install any film at temperatures on the installation side below +6° C.
  1. Fill the spray bottle with 0.5 litres of water and add the transfer concentrate (30 ml) (enough for approx. 6 to 7 m² of glass surface).
  2. Thoroughly clean the glass with commercial or our glass cleaner!
    Remove all sticky particles (e.g. paint or fly dirt) preferably with the glass scraper blade. No dirt residues should remain on the glass!
  3. The sandblasting foil consists of the mostly white backing paper and the actual sandblasting foil.
    Now place the sandblasting foil with the view side down on the glass pane or similar. You are now looking at the back of the film.
    Then carefully and slowly peel off the backing paper at as shallow an angle as possible until it is about halfway along the entire length of the film. Cut the backing paper and stick it back onto the sandblasting film with a gap of about 2 cm to the remaining backing paper.
  4. Now hold the in place while the 2nd person starting from the corner, and at the same time spray the adhesive side of the that is now exposed with the liquid.
    Afterwards, the glass pane (surface to be pasted) must be sprayed with the liquid. Do not be sparing with the liquid, the film and pane should be well wet.
  5. Place the on the glass, the film should slide back and forth well, otherwise spray the glass again.
  6. Now spray the other side of the as well, this will make it easier for you to work with the mounting squeegee.
  7. Now press the liquid out evenly with the mounting squeegee from the centre to the right and to the left. Make sure that there is no residual water left under the film! Repeat this procedure several times to remove even invisible water residues. When doing this, wrap the supplied squeegee with a paper towel to avoid any scratches.
  8. Carefully wipe the edges and the foil with a soft cloth. If necessary, press the edges again with the mounting squeegee.
  9. Now let the dry for three days without touching it.
  10. Wait two weeks before cleaning the film for the first time and never use hard objects (brush or blade) to clean it. Commercially available glass cleaners can be used.

FAQ`s about the installation

Can I carry out the film installation alone?

Films that are no larger than 1m² can be installed alone without any problems.
For larger pieces, it is recommended that two people carry out the installation. This makes it easier to handle the film and place it on the pane.

How can I avoid dust inclusions under the adhesive back side?

First, clean your windows really thoroughly with glass cleaner. Then go over the entire window pane again with our supplied glass scraper blade to remove any hard-core impurities on the pane (such as fly droppings). These fine stains are often invisible to the naked eye and you will be amazed at what the blade still removes.

In addition, do not lay the after peeling off (covers the adhesive side for transport) on the floor to get it wet. Rather, pull a table nearby to spray the film on. On the floor you will always stir up very fine dust particles, which will then settle on the adhesive side facing upwards. These dust particles can later show up on the pane under the , which is something to avoid.

Can I apply the without transfer concentrate?

Alternatively, you should at least use a pH-neutral cleaner. We do not recommend installation without any additive at all, which increases the gliding properties of the water!

We strongly advise against the use of water diluted with detergent. This can lead to streaking due to a reaction with the film adhesive.

Does the film have to be applied perfectly to the glass at the first attempt?

No, this is not necessary as long as you have sprayed the adhesive side of the window film and your glass sufficiently wet. Due to the moisture, the adhesive has no adhesive effect, which makes it easy to move the film and position it precisely. It is even possible to remove the film from the glass again and reapply it.

After mounting, small bubbles formed the next day

The bubbles consist of residual liquid that was not pressed out from under the film when it was applied. Over time, these run down between the already drying film adhesive as far as they can under the film and collect in some places. The bubbles disappear by themselves when the remaining liquid diffuses through the film to the outside. Depending on the outside temperature and sunlight, this can take up to three or more weeks before the film fits like a second skin.

In any case, you should wait this time and do nothing. In most cases, the blisters disappear all by themselves!

How easy is it to remove the film?

The window film itself can be easily removed. To do this, detach one corner and fold it over directly. The film can then be removed from the glass at as flat an angle as possible.

It is possible that residues of the film adhesive remain in some places. These can be soaked with our adhesive remover or acetone and then removed again with a glass scraper or ceramic field scraper. You will find detailed instructions on how to remove window films on our homepage in the FAQ`s.
Order a product sample...

We will be happy to send you a free sample of this and up to four other films without obligation.
The samples are approx. 9 x 9 cm in size and will be sent to you free of charge and without obligation by letter post.

1. select sample (max. 5 pieces)
Whiteboard film, white Whiteboard film, white
Art.-Nr. 473001
Please select at least one sample!
2. Specify shipping address
Flat, floor, etc. (optional)
Germany
Here you can find our privacy policy.
Thank you very much!
We have received your foil requests.
The samples are usually sent to you within one working day.
Customer service

Expert adviser Thomas de Jong - Customer support

» Open questions about one of our articles? I'll be happy to answer them for you! «

Sponge
Sponge
€1.20
- 27 %
Ein Montageset mit Sprühflasche, Filzrakel und Transferkonzentrat für perfekte Ergebnisse.
Mounting set
€12.30 €8.95
- 25 %
Assembly set professional
Assembly set professional
€20.20 €14.95
Tafelfolie, schwarz zur Gestaltung einer eigenen Tafel
Blackboard film, black
€30.00 / m²
Undurchsichtige Farbfolie selbstklebend in großer Auswahl
Opaque colour film
€34.18 / m²
Tafelfolie, schwarz zur Gestaltung einer eigenen Tafel
Blackboard film, black
€30.00 / m²
Anti-Rutsch-Folie R11
Anti-slip film R10
€29.38 / m²
Lichtdurchlässige Farbfolie selbstklebend
Translucent colour film
€34.18 / m²
Questions about the item1
1 Question(s) in other languages.
Click here to view these question(s).
Question:
Ich würde gerne eine Whiteboard-Folie auf meinem Schreibtisch anbringen. Dieser ist klappbar und könnte mit der Folie dann als Whiteboard-Tafel verwendet werden.
Der Schreibtisch-Platte selbst ist weiß und hat eine nicht perfekt glatte, sondern eine leicht raue Oberfläche (sehr feinporig).
Marius S. am 15. January 2023
Answer:
Die Folie müsste gut halten. Um ganz sicher zu gehen machen Sie am besten einen Test mit einem kostenlosen Folienmuster, dass Sie sich hier auf der Seite anfordern können.
Velken Service-Team on 15. January 2023
Compose reply
  Ask new question
Your question will be publicly visible and can - in addition to our support - also be answered by a member of our community.
Reviews 0
Be the first to rate this article!
Write a review now!
Last viewed