Adhesive film, transparent waves, width 50 mm (embossed)
- glueless
- Indoor assembly
Price per m² from: €37.82 Price per m²: €34.04 Price per m²: €37.82 incl. VAT plus shipping costs. Item no. 281038
Delivery time approx. 3-6 days
Protection from | Look |
Privacy screen | medium |
Light transmission | medium |
Transparency | low |
Design | Strips, Waves |
Colour | transparent |
Liability | glueless |
Mounting side | Indoor assembly |
Start WhatsApp chat
Modern elegance: Transparent adhesive film with embossed waves (50 mm).
The transparent adhesive film with embossed waves and a width of 50 mm is a versatile solution for various decoration and privacy requirements. The embossed wave patterns add a dynamic and modern aesthetic to spaces.
This film is ideal for use on glass surfaces such as windows, glass doors or shower walls. The 50 mm width allows for precise application and creates an appealing visual effect.
Thanks to its transparent properties, the adhesive film still allows sufficient light into the room while providing privacy. The embossed wave patterns add an interesting texture to the surfaces and provide a touch of elegance.
The application of this adhesive film is simple and straightforward. It can be easily applied to clean and smooth surfaces and leaves no residue when removed.
With the transparent adhesive film with embossed waves and a width of 50 mm, you can give your rooms a modern and stylish touch. Use its versatile application possibilities for attractive decoration and effective privacy protection.
The scratch-resistant surface of the self-adhesive film makes it easy to clean with standard glass cleaners.
Included in delivery
You should definitely order the transfer concentrate, art. no. 020010 additionally. It makes the installation easier and leads to a better result. Alternatively, you can also use a pH-neutral cleaner. This must be pH-neutral to prevent streaks from forming together with the film adhesive!Any offcuts are not included in the scope of delivery.
Manufacturer's guarantee
The adhesive privacy film is a composite adhesive film made of PET and soft PVC. It is dimensionally stable with a high UV resistance.
The durability and adhesive strength of the films for interior installation are up to 10 years, depending on various factors.
Technical data | |
---|---|
Material | PET and soft PVC |
Film thickness | approx. 110 µm |
Adhesive | static (without adhesive) |
Temperature range | -10° C to + 50° C |
Mounting recommendation
Based on technical data and extensive experience, we can recommend mounting on the following vertically installed glass types:
Glass type | Number of panes | mainly installed | U-value W/(m²K) | Interior installation |
---|---|---|---|---|
Single glazing | 1 (-fold) | until 1978 | 5,7 - 5,8 | yes |
Double glazing | 2 (-fold) 2 (-fold) 3 (-fold) | 1978 - 1994 1995 - Today 1978 - 1994 | 3.0 - 3.4 1.2 - 2.5 2.1 - 2.4 | yes yes yes |
Thermal insulation glazing | 2 (-fold) 3 (-fold) | 1978 - 1994 1995 - Today | 1.7 - 2.1 0.4 - 1.4 | yes yes |
Solar control glazing | 2 (-fold) 2 (-fold) 3 (-fold) | 1978 - 1994 1995 - Today 1995 - Today | 1.4 - 2.0 1.0 - 2.5 0.5 - 1.3 | yes yes yes |
These recommendations may still result in glass breakage due to various factors at the installation site. According to our AGB, §10 paragraph 3 we do not accept any liability for this.
Assembly instructions for Adhesive films (glueless)
You will need the following items
- Plastic bottle with hand sprayer, adhesive tape, paper towels (not included)
- Transfer concentrate (not included)
- Glass cleaner (not included) or commercially available glass cleaner
- Installation squeegee and glass scraper blade (included free of charge in the delivery).
Installation tips
- Two people should carry out the installation!
- Do not install any film at temperatures on the installation side below +6° C.
- Fill the spray bottle with 0.5 litres of water and add the transfer concentrate (30 ml) (enough for approx. 6 to 7 m² of glass surface).
-
Thoroughly clean the glass with commercial or our glass cleaner!
Remove all sticky particles (e.g. paint or fly dirt) preferably with the glass scraper blade. No dirt residues should remain on the glass! - The sandblasting foil consists of the mostly white backing paper and the actual sandblasting foil.
Now place the sandblasting foil with the view side down on the glass pane or similar. You are now looking at the back of the film.
Then carefully and slowly peel off the backing paper at as shallow an angle as possible until it is about halfway along the entire length of the film. Cut the backing paper and stick it back onto the sandblasting film with a gap of about 2 cm to the remaining backing paper. - Now hold the Adhesive foils in place while the 2nd person from the corner and at the same time spray the now exposed back of the ordered sun protection film with the liquid.
- Afterwards, the glass pane (surface to be pasted) must be sprayed with the liquid. Do not be sparing with the liquid, film and pane should be well wet.
- Place the Adhesive foils on the glass, the film should slide back and forth well, otherwise spray the glass again.
- Now spray the other side of the Adhesive foils as well, this will make it easier for you to work with the mounting squeegee.
- Now press the liquid out evenly with the mounting squeegee from the centre to the right and to the left. Make sure that there is no residual water left under the film! Repeat this procedure several times to remove even invisible water residues. When doing this, wrap the supplied squeegee with a paper towel to avoid any scratches.
- Carefully wipe the edges and the foil with a soft cloth. If necessary, press the edges again with the mounting squeegee.
- Now let the Adhesive foils dry for three days without touching it.
- Wait two weeks before cleaning the film for the first time and never use hard objects (brush or blade) to clean it. Commercially available glass cleaners can be used.
FAQ`s about the installation
Can I carry out the film installation alone?
For larger pieces, it is recommended that two people carry out the installation. This makes it easier to handle the film and place it on the pane.
How can I avoid dust inclusions under the adhesive back side?
In addition, do not lay the Adhesive foils after peeling off (covers the adhesive side for transport) on the floor to get it wet. Rather, pull a table nearby to spray the film on. On the floor you will always stir up very fine dust particles, which will then settle on the adhesive side facing upwards. These dust particles can later show up on the pane under the Adhesive foils, which is something to avoid.
Can I apply the Adhesive foils without transfer concentrate?
We strongly advise against the use of water diluted with detergent. This can lead to streaking due to a reaction with the film adhesive.
Does the film have to be applied perfectly to the glass at the first attempt?
How easy is it to remove the film?
Film specialist, Dirk Bilstein - Application engineer
" I will be happy to give you expert advice on choosing the right film! "
Click here to view these question(s).
Rate this item objectively and share your buying experience with other visitors.
As a thank you, we will reward you with a shopping voucher* of up to 10€ for your next purchase.
*Voucher valid for 1 year, redeemable from 30€ value of goods (5€ voucher) or 50€ value of goods (10€ voucher), max. 1 voucher per order, not combinable.
The voucher will then be sent to you by email.
You will receive an email from us after the rating has been activated in which you will find the shopping voucher.
New reviews are activated by us every working day.
The company Velken-Folientechnik GmbH accepts this assignment and ensures the necessary data protection.