Natural beauty: transparent matt adhesive film with dandelions

Adhesive film, transparent matt with dandelions

from €1.00

Price per m² from: €37.82 Price per m²: €34.04 Price per m²: €37.82 incl. VAT plus shipping costs. Item no. 281036

Order accessories directly

Transfer concentrate

€3.49

Mounting set

€8.95

Assembly set professional

€14.95

Delivery time approx. 1-4 days

Properties of this film

Protection from	Look
Privacy screen	high
Light transmission	medium
Transparency	low
Design	Motifs, Nature
Colour	transparent
Liability	glueless
Mounting side	Indoor assembly

Questionst?
Start WhatsApp chat

Airy elegance: Transparent matt adhesive film with dandelions The transparent matt adhesive...

Close menu

Airy elegance: Transparent matt adhesive film with dandelions

The transparent matt adhesive film with dandelion motifs is a charming way to decorate windows and glass surfaces. The delicate dandelions give rooms an airy and natural atmosphere.

The matt surface of the film ensures discreet light transmission and reduces annoying glare. The dandelion motifs have a particularly harmonious effect and add an aesthetic touch to the rooms.

The adhesive film is easy to apply and leaves no residue when removed. It is perfect for living rooms, offices or other spaces where a natural yet stylish atmosphere is desired.

Bring your windows to life and add a touch of lightness and beauty to your premises with the transparent matt adhesive film with dandelions.

The scratch-resistant surface of the self-adhesive film makes it easy to clean with standard glass cleaners.

Included in delivery

You should definitely order the transfer concentrate, art. no. 020010 additionally. It makes the installation easier and leads to a better result. Alternatively, you can also use a pH-neutral cleaner. This must be pH-neutral to prevent streaks from forming together with the film adhesive!

Any offcuts are not included in the scope of delivery.

Technical data and information at a glance...

Close menu

Manufacturer's guarantee

The adhesive privacy film is a composite adhesive film made of PET and soft PVC. It is dimensionally stable with a high UV resistance.

The durability and adhesive strength of the films for interior installation are up to 10 years, depending on various factors.

Technical data
Material	PET and soft PVC
Film thickness	approx. 110 µm
Adhesive	static (without adhesive)
Temperature range	-10° C to + 50° C

Mounting recommendation

Based on technical data and extensive experience, we can recommend mounting on the following vertically installed glass types:

Glass type	Number of panes	mainly installed	U-value W/(m²K)	Interior installation
Single glazing	1 (-fold)	until 1978	5,7 - 5,8	yes
Double glazing	2 (-fold) 2 (-fold) 3 (-fold)	1978 - 1994 1995 - Today 1978 - 1994	3.0 - 3.4 1.2 - 2.5 2.1 - 2.4	yes yes yes
Thermal insulation glazing	2 (-fold) 3 (-fold)	1978 - 1994 1995 - Today	1.7 - 2.1 0.4 - 1.4	yes yes
Solar control glazing	2 (-fold) 2 (-fold) 3 (-fold)	1978 - 1994 1995 - Today 1995 - Today	1.4 - 2.0 1.0 - 2.5 0.5 - 1.3	yes yes yes

These recommendations may still result in glass breakage due to various factors at the installation site. According to our AGB, §10 paragraph 3 we do not accept any liability for this.

How to mount this film on the window...

Close menu

Start assembly video — Installation video for window films. Click on the picture to start.

Assembly instructions for Adhesive films (glueless)

You will need the following items

Plastic bottle with hand sprayer, adhesive tape, paper towels (not included)
Transfer concentrate (not included)
Glass cleaner (not included) or commercially available glass cleaner
Installation squeegee and Glass scraper blade (included free of charge in the delivery).

Installation tips

Two people should carry out the installation!
Do not install any film at temperatures on the installation side below +6° C.

Fill the spray bottle with 0.5 litres of water and add the transfer concentrate (30 ml) (enough for approx. 6 to 7 m² of glass surface).
Thoroughly clean the glass with commercial or our glass cleaner!
Remove all sticky particles (e.g. paint or fly dirt) preferably with the Glass scraper blade. No dirt residues should remain on the glass!
The sandblasting foil consists of the mostly white backing paper and the actual sandblasting foil.
Now place the sandblasting foil with the view side down on the glass pane or similar. You are now looking at the back of the film.
Then carefully and slowly peel off the backing paper at as shallow an angle as possible until it is about halfway along the entire length of the film. Cut the backing paper and stick it back onto the sandblasting film with a gap of about 2 cm to the remaining backing paper.
Now hold the Adhesive foils in place while the 2nd person from the corner and at the same time spray the now exposed back of the ordered sun protection film with the liquid.
Afterwards, the glass pane (surface to be pasted) must be sprayed with the liquid. Do not be sparing with the liquid, film and pane should be well wet.
Place the Adhesive foils on the glass, the film should slide back and forth well, otherwise spray the glass again.
Now spray the other side of the Adhesive foils as well, this will make it easier for you to work with the mounting squeegee.
Now press the liquid out evenly with the mounting squeegee from the centre to the right and to the left. Make sure that there is no residual water left under the film! Repeat this procedure several times to remove even invisible water residues. When doing this, wrap the supplied squeegee with a paper towel to avoid any scratches.
Carefully wipe the edges and the foil with a soft cloth. If necessary, press the edges again with the mounting squeegee.
Now let the Adhesive foils dry for three days without touching it.
Wait two weeks before cleaning the film for the first time and never use hard objects (brush or blade) to clean it. Commercially available glass cleaners can be used.

FAQ`s about the installation

Films that are no larger than 1m² can be installed alone without any problems.
For larger pieces, it is recommended that two people carry out the installation. This makes it easier to handle the film and place it on the pane.

First, clean your windows really thoroughly with glass cleaner. Then go over the entire window pane again with our supplied Glass scraper blade to remove any hard-core impurities on the pane (such as fly droppings). These fine stains are often invisible to the naked eye and you will be amazed at what the blade still removes.

In addition, do not lay the Adhesive foils after peeling off (covers the adhesive side for transport) on the floor to get it wet. Rather, pull a table nearby to spray the film on. On the floor you will always stir up very fine dust particles, which will then settle on the adhesive side facing upwards. These dust particles can later show up on the pane under the Adhesive foils, which is something to avoid.

Alternatively, you should at least use a pH-neutral cleaner. We do not recommend installation without any additive at all, which increases the gliding properties of the water!

We strongly advise against the use of water diluted with detergent. This can lead to streaking due to a reaction with the film adhesive.

No, this is not necessary. The moisture makes it easy to move the film and position it precisely. Unlike self-adhesive films, you can always remove and reapply this adhesive film.

The window film itself can be easily removed. To do this, detach one corner and pull the film off the glass at as flat an angle as possible. No impurities will remain on the pane!