Gold film, matt brushed

  • self-adhesive
  • Indoor assembly, Outdoor installation
Klebefolie matt gebürstetes Gold
Klebefolie matt gebürstetes Gold im Detail
Geometry A4 cut Linear metre
Rectangle
Square
Pentagon with slope
Rectangle with bevel
Rectangle with two slopes
symmetric trapezoid
right triangle
symmetrical triangle
Gable window
Rectangle with segmental arch
Rectangle with basket arch
Rectangle with semicircle
Quarter circle
Circle
Semicircle
Circle section
Oval / Ellipse
Available in the dimensions:
min. 5,0 x 5,0 cm
max. 123 x 2.500,0 cm
Width [cm]
Height [cm]
Cutting possible on request
Unfortunately, your desired size cannot be ordered via the online shop. However, we can still offer you the dimensions. Please ask our customer service at info@velken.shop.
from €1.00

Price per m² from: €23.31 Price per m²: €20.98 Price per m²: €23.31 incl. VAT plus shipping costs. Item no. 673130

Order accessories directly

Facilitates the installation of window films immensely! The films can be positioned on the glass without sticking. The concentrate is sufficient for an area of approx. 6m². The appropriate quantity is offered in the shopping basket.

Transfer concentrate
€3.49

This assembly set is suitable for smaller foil assemblies of up to 6m². In the set price you save over 15% compared to the individual components.

Mounting set
€8.95

This assembly set is ideal for medium-sized film installations of 5-10 m². With this bundle you save almost 23% compared to the individual components.

Assembly set professional
€14.95

Delivery time approx. 5-7 Days

CNC cutting accurate to the millimetre

free assembly tool

Properties of this film
Application
Glass, Plastic, Wood
Liability
self-adhesive
Durability
10 years (indoor installation), 8 years (outdoor installation)
Questionst?
Start WhatsApp chat
Self-adhesive gold foil This opaque, matt brushed high-performance film is ideal for use in...

Self-adhesive gold foil

This opaque, matt brushed high-performance film is ideal for use in decorative and advertising technology, e.g. for creating effects, for signage, markings or vehicle lettering. It can also be used for creative designs on flat and slightly curved surfaces. It is very dimensionally stable and resistant. The reverse side (adhesive side) of this gold foil is silver.

Vertical brushing

The brushing of the foil runs vertically! This means, for example, if you order width 124 cm x height 200 cm, the brushing runs from top to bottom along the height.

This high-quality gold foil is also suitable for elegant lettering and logos. It has a high-gloss finish on the adhesive-coated side and is therefore also suitable for mirror-inverted lettering on shop window interiors. Please note that the colour reproduction can only serve as a non-binding guide.

Included in delivery

You should definitely order the transfer concentrate, art. no. 020010 additionally. It makes the installation easier and leads to a better result. Alternatively, you can also use a pH-neutral cleaner. This must be pH-neutral to prevent streaks from forming together with the film adhesive!

Any offcuts are not included in the scope of delivery.

Technical data and information at a glance...

Warranty of the manufacturer

The manufacturer grants a durability guarantee of 2 years on these metal effect foils when mounted vertically outdoors. Indoors, the durability is considerably longer.

Due to the risk of glass breakage, these metal effect films should not be applied to windows or glass doors that are exposed to the sun.

Technical data
Material durable metal-PVC composite
Film thickness approx. 75 µm
Adhesive Polyacrylate adhesive
Adhesive strength 1,5 - 4,0 N/cm
Dimensional stability maximum -1.50
Temperature range -30° C to + 80° C
Answers to the most frequently asked questions...

General questions

Can I get a free foil sample?

Of course, please click on this link to access the corresponding order form. You are welcome to add to the list of items if you wish. There are no costs for you!

Will you also cut the film for me?

We cut each film to the exact millimetre according to the dimensions you enter. The cutting is free of charge. You can find detailed instructions on how to measure your panes here.

Alternatively, you can also cut your film by hand with a cutter knife. However, this requires a little manual skill, so you are usually better off using our free service.

Can you also cut a round blank or other geometry?

In general, almost all 2D shapes can be produced. Many geometries (e.g. triangles, trapezoids, circles) can be ordered directly via the online shop. To do so, please click on the orange rectangle to the right of the article image. You can then choose between many different shapes.

For shapes that are not specified, please send us a small sketch (photo) in which you specify the side lengths, radii or angles. Please contact us for this purpose.

Does the film also adhere to surfaces other than glass?

The window film adheres to all surfaces that are approximately as smooth as glass. When applying the film to plastic, please bear in mind that the adhesive may bond with the plastic, making it impossible to remove the film cleanly later.

How can I clean my window pane with the film in place?

You can keep your window pane clean as usual. The film should not be rubbed with sharp-edged objects (e.g. a brush).
You can find more information in our guide General care instructions for window films.

Can the film be removed without leaving any residue?

All window films can be removed without leaving any residue and without damaging the glass surface!
Below you will find detailed instructions on how to remove old window films.

Can you also print on films?

Unfortunately, we do not currently offer foil printing and do not have any partner companies with whom we can realise foil printing.

How to mount this film on the window...
Start assembly video
Installation video for window films. Click on the picture to start.

Assembly instructions for Decoration films (self-adhesive)

You will need the following items

Installation tips

  • Two people should carry out the installation!
  • Do not install any film at temperatures on the installation side below +6° C.
  1. Fill the spray bottle with 0.5 litres of water and add the transfer concentrate (30 ml) (enough for approx. 6 to 7 m² of glass surface).
  2. Thoroughly clean the glass with commercial or our glass cleaner!
    Remove all sticky particles (e.g. paint or fly dirt) preferably with the Glass scraper blade. No dirt residues should remain on the glass!
  3. The sandblasting foil consists of the mostly white backing paper and the actual sandblasting foil.
    Now place the sandblasting foil with the view side down on the glass pane or similar. You are now looking at the back of the film.
    Then carefully and slowly peel off the backing paper at as shallow an angle as possible until it is about halfway along the entire length of the film. Cut the backing paper and stick it back onto the sandblasting film with a gap of about 2 cm to the remaining backing paper.
  4. Now hold the in place while the 2nd person starting from the corner, and at the same time spray the adhesive side of the that is now exposed with the liquid.
    Afterwards, the glass pane (surface to be pasted) must be sprayed with the liquid. Do not be sparing with the liquid, the film and pane should be well wet.
  5. Place the on the glass, the film should slide back and forth well, otherwise spray the glass again.
  6. Now spray the other side of the as well, this will make it easier for you to work with the mounting squeegee.
  7. Now press the liquid out evenly with the mounting squeegee from the centre to the right and to the left. Make sure that there is no residual water left under the film! Repeat this procedure several times to remove even invisible water residues. When doing this, wrap the supplied squeegee with a paper towel to avoid any scratches.
  8. Carefully wipe the edges and the foil with a soft cloth. If necessary, press the edges again with the mounting squeegee.
  9. Now let the dry for three days without touching it.
  10. Wait two weeks before cleaning the film for the first time and never use hard objects (brush or blade) to clean it. Commercially available glass cleaners can be used.

FAQ`s about the installation

Can I carry out the film installation alone?

Films that are no larger than 1m² can be installed alone without any problems.
For larger pieces, it is recommended that two people carry out the installation. This makes it easier to handle the film and place it on the pane.

How can I avoid dust inclusions under the adhesive back side?

First, clean your windows really thoroughly with glass cleaner. Then go over the entire window pane again with our supplied Glass scraper blade to remove any hard-core impurities on the pane (such as fly droppings). These fine stains are often invisible to the naked eye and you will be amazed at what the blade still removes.

In addition, do not lay the after peeling off (covers the adhesive side for transport) on the floor to get it wet. Rather, pull a table nearby to spray the film on. On the floor you will always stir up very fine dust particles, which will then settle on the adhesive side facing upwards. These dust particles can later show up on the pane under the , which is something to avoid.

Can I apply the without transfer concentrate?

Alternatively, you should at least use a pH-neutral cleaner. We do not recommend installation without any additive at all, which increases the gliding properties of the water!

We strongly advise against the use of water diluted with detergent. This can lead to streaking due to a reaction with the film adhesive.

Does the film have to be applied perfectly to the glass at the first attempt?

No, this is not necessary as long as you have sprayed the adhesive side of the window film and your glass sufficiently wet. Due to the moisture, the adhesive has no adhesive effect, which makes it easy to move the film and position it precisely. It is even possible to remove the film from the glass again and reapply it.

After mounting, small bubbles formed the next day

The bubbles consist of residual liquid that was not pressed out from under the film when it was applied. Over time, these run down between the already drying film adhesive as far as they can under the film and collect in some places. The bubbles disappear by themselves when the remaining liquid diffuses through the film to the outside. Depending on the outside temperature and sunlight, this can take up to three or more weeks before the film fits like a second skin.

In any case, you should wait this time and do nothing. In most cases, the blisters disappear all by themselves!

How easy is it to remove the film?

The window film itself can be easily removed. To do this, detach one corner and fold it over directly. The film can then be removed from the glass at as flat an angle as possible.

It is possible that residues of the film adhesive remain in some places. These can be soaked with our adhesive remover or acetone and then removed again with a glass scraper or ceramic field scraper. You will find detailed instructions on how to remove window films on our homepage in the FAQ`s.
Order a product sample...

We will be happy to send you a free sample of this and up to four other films without obligation.
The samples are approx. 9 x 9 cm in size and will be sent to you free of charge and without obligation by letter post.

1. select sample (max. 5 pieces)
Gold film, matt brushed Gold film, matt brushed
Art.-Nr. 673130
Please select at least one sample!
2. Specify shipping address
Flat, floor, etc. (optional)
Germany
Here you can find our privacy policy.
Thank you very much!
We have received your foil requests.
The samples are usually sent to you within one working day.
Customer service

Foil expert Martin Siegel - Managing Director

» Do you have any questions about this item? I'm happy to help!«

Klebefolie glänzendes Gold
€23.22 / m²
Klebefolie Chrom
€23.11 / m²
Mirror film high gloss, opaque
  • Indoor and outdoor installation
  • self-adhesive
€66.53 / m²
Klebefolie glänzendes Gold
Gold film, glossy
€23.22 / m²
Farbkarte VeFo-Flex Premium
VeFo-Flex Premium
€19.78 / m²
Undurchsichtige Farbfolie selbstklebend in großer Auswahl
Opaque colour film
€34.18 / m²
- 25 %
Assembly set professional
Assembly set professional
€20.20 €14.95
- 27 %
Ein Montageset mit Sprühflasche, Filzrakel und Transferkonzentrat für perfekte Ergebnisse.
Mounting set
€12.30 €8.95
Durchsichtige Farbfolie selbstklebend
Transparent colour film
€34.18 / m²
Lichtdurchlässige Farbfolie selbstklebend
Translucent colour film
€34.18 / m²
Tafelfolie, schwarz zur Gestaltung einer eigenen Tafel
Blackboard film, black
€30.00 / m²
Klebefolie Chrom
Chrome film
€23.11 / m²
- 28 %
Premium mounting set
Premium mounting set
€49.15 €34.90
Klebefolie glänzendes Gold
Gold film, glossy
€23.22 / m²
Durchsichtige Farbfolie selbstklebend
Transparent colour film
€34.18 / m²
Lichtdurchlässige Farbfolie selbstklebend
Translucent colour film
€34.18 / m²
Klebefolie Chrom
Chrome film
€23.11 / m²
Questions about the item1
1 Question(s) in other languages.
Click here to view these question(s).
Question:
Darf die Folie zur Montage überlappen oder muss sie "auf Stoß" angebracht werden? Ich würde gerne ein Plexiglasrohr damit beziehen und ein sauberes "auf Stoß" arbeiten wird vermutlich sehr schwierig ohne eine Lücke zu hinterlassen.
Martin G. am 27. December 2022
Answer:
Die Folie darf auch überlappen. Dies ist die sicherere Variante, beim auf Stoß aneinander legen kann das Ergebnis besser aussehen wenn alles genau passt.
Velken Service-Team on 28. December 2022
Compose reply
  Ask new question
Your question will be publicly visible and can - in addition to our support - also be answered by a member of our community.
Reviews 0
Be the first to rate this article!
Write a review now!
Last viewed