Tile sticker in ash grey custom-fit size

Rounded corners

Width [cm]

Height [cm]

To measure your tile!

from €0.35 / piece

Price per m²: €24.31 Price per m²: €18.23 incl. VAT plus shipping costs. Item no. 911375

Quantity	Unit price
to 24	€0.35
from 25	€0.30
from 50	€0.25
from 100	€0.19
from 251	€0.18

Delivery time approx. 5-7 Days

CNC cutting accurate to the millimetre

free assembly tool

Properties of this film

Colour

grey

Questionst?
Start WhatsApp chat

[OS_SUBTMPL:article/description_tile_foils_colour_foils.html]

Close menu

Let them shine in new splendour!

Easily paste over your old, boring bathroom or kitchen tiles with our tile foils in many different decors and colours, perfectly tailored to your size.

These tile films are only suitable for light-coloured and smooth wall tiles. If dark tiles or motif tiles are to be covered, we recommend testing with a sample, as the thin tile foils may not cover the colours. It is also not possible to apply the film to strongly rounded tile edges, as this film is not 3D deformable.

Furthermore, our tile foils are completely insensitive to moisture. In short, a unique, innovative product that allows you unlimited creativity at low cost.

Advantages of tile films

Cost-efficient: Save a lot of money compared to traditional renovation.
Durable: 7-year guarantee on durability.
Hygienic: Quick and easy to clean, prevents mould and stains.

Proven safety

Resistant to most petroleum-based oils, greases, solvents, mild acids and alkalis.

Technical data and information at a glance...

Close menu

Manufacturer's guarantee

The manufacturer grants a durability guarantee of 7 years on these opaque colour films when mounted vertically outdoors. Indoors, these films are considerably longer lasting.

The bonded film is resistant to most petroleum-based oils, greases, solvents, mild acids and alkalis.

Technical data
Material	PVC (polymer plasticised)
Film thickness	approx. 70 µm
Adhesive	Polyacrylate adhesive
Adhesive strength (ASTMD-903)	approx. 12.5 N/25 mm
Dimensional stability	maximum -0.45
Temperature range	-30° C to + 80° C

How to mount this film on the window...

Close menu

Start assembly video — Installation video for window films. Click on the picture to start.

Assembly instructions for Tile foils

You will need the following items

Plastic bottle with hand sprayer, adhesive tape, paper towels (not included)
Transfer concentrate (not included)
Glass cleaner (not included) or commercially available glass cleaner
Installation squeegee and Glass scraper blade (included free of charge in the delivery).

Installation tips

Two people should carry out the installation!
Do not install any film at temperatures on the installation side below +6° C.

Fill the spray bottle with 0.5 litres of water and add the transfer concentrate (30 ml) (enough for approx. 6 to 7 m² of glass surface).
Thoroughly clean the glass with commercial or our glass cleaner!
Remove all sticky particles (e.g. paint or fly dirt) preferably with the Glass scraper blade. No dirt residues should remain on the glass!
The sandblasting foil consists of the mostly white backing paper and the actual sandblasting foil.
Now place the sandblasting foil with the view side down on the glass pane or similar. You are now looking at the back of the film.
Then carefully and slowly peel off the backing paper at as shallow an angle as possible until it is about halfway along the entire length of the film. Cut the backing paper and stick it back onto the sandblasting film with a gap of about 2 cm to the remaining backing paper.
Now hold the in place while the 2nd person
Place the on the glass, the film should slide back and forth well, otherwise spray the glass again.
Now spray the other side of the as well, this will make it easier for you to work with the mounting squeegee.
Now press the liquid out evenly with the mounting squeegee from the centre to the right and to the left. Make sure that there is no residual water left under the film! Repeat this procedure several times to remove even invisible water residues. When doing this, wrap the supplied squeegee with a paper towel to avoid any scratches.
Carefully wipe the edges and the foil with a soft cloth. If necessary, press the edges again with the mounting squeegee.
Now let the dry for three days without touching it.
Wait two weeks before cleaning the film for the first time and never use hard objects (brush or blade) to clean it. Commercially available glass cleaners can be used.

FAQ`s about the installation

Films that are no larger than 1m² can be installed alone without any problems.
For larger pieces, it is recommended that two people carry out the installation. This makes it easier to handle the film and place it on the pane.

First, clean your windows really thoroughly with glass cleaner. Then go over the entire window pane again with our supplied Glass scraper blade to remove any hard-core impurities on the pane (such as fly droppings). These fine stains are often invisible to the naked eye and you will be amazed at what the blade still removes.

In addition, do not lay the after peeling off (covers the adhesive side for transport) on the floor to get it wet. Rather, pull a table nearby to spray the film on. On the floor you will always stir up very fine dust particles, which will then settle on the adhesive side facing upwards. These dust particles can later show up on the pane under the , which is something to avoid.

Alternatively, you should at least use a pH-neutral cleaner. We do not recommend installation without any additive at all, which increases the gliding properties of the water!

We strongly advise against the use of water diluted with detergent. This can lead to streaking due to a reaction with the film adhesive.

Order a product sample...

Close menu

We will be happy to send you a free sample of this and up to four other films without obligation.
The samples are approx. 9 x 9 cm in size and will be sent to you free of charge and without obligation by letter post.