Mother-of-pearl colour effect film, warm, opaque

  • self-adhesive
  • Indoor assembly, Outdoor installation
Mother-of-pearl colour effect film, warm, opaque
Montagevideo starten
Mother-of-pearl colour effect film, warm, opaque
Mother-of-pearl colour effect film, warm, opaque
Geometry Linear metre
Rectangle
Square
Pentagon with slope
Rectangle with bevel
Rectangle with two slopes
symmetric trapezoid
right triangle
symmetrical triangle
Gable window
Rectangle with segmental arch
Rectangle with basket arch
Rectangle with semicircle
Quarter circle
Circle
Semicircle
Circle section
Oval / Ellipse
Available in the dimensions:
min. 5,0 x 5,0 cm
max. 134 x 2.500,0 cm
Width [cm]
Height [cm]
from €1.00

Price per m² from: €43.96 Price per m²: €39.56 Price per m²: €43.96 incl. VAT plus shipping costs. Item no. 223904

Order accessories directly

Facilitates the installation of window films immensely! The films can be positioned on the glass without sticking. The concentrate is sufficient for an area of approx. 6m². The appropriate quantity is offered in the shopping basket.

Transfer concentrate
€3.40

This installation set is suitable for smaller film installations of only a few windows with an area of around 1m² each. The set price saves you over 15% compared to the individual components.

Mounting set
€4.95

This installation set is ideal for medium-sized film installations of up to five windows with a maximum area of 2m² each . You save almost 23% with this bundle compared to the individual components.

Assembly set professional
€9.95

Delivery time approx. 1-4 days

CNC cutting accurate to the millimetre

free assembly tool

Questionst?
Start WhatsApp chat
The light of the seas for your home This opaque colour effect film shimmers in its pearlescent...

The light of the seas for your home

This opaque colour effect film shimmers in its pearlescent sheen, with rather warm tones from magenta to yellow. Suitable for both indoor and outdoor applications, it is perfect for eye-catching logo plots, lettering, slogans, embellishments and more.

With different viewing angles and lighting conditions, the colours change fluidly to create great effects.

Most common use

Due to its beautiful play of light, it is particularly suitable for surfaces that are to be decorated with such great effects. The back of the film is white.

Not recommended for mounting on outgassing surfaces (e.g. non-tempered acrylic glass).

Important:
Due to the production process, this product may occasionally show a slight cloudiness. This does not represent a defect.

Advantages of this film

  • Creates fluid colour changes when the viewing angle or lighting conditions change.
  • Suitable for application to smooth surfaces
  • Create eye-catching logo plots, lettering, slogans, wall tattoos and more
  • Easy to handle due to their thickness of 160 µm
Technical data and information at a glance...

Durability

Depending on various factors, the durability of films for outdoor installation is 2 to 3 years in Central Europe.

Technical data
Material Polyester, metallised with effect coating
Film thickness approx. 160 µm
Adhesive Polyacrylate adhesive
Temperature resistance -30 °C to +80 °C
How to mount this film on the window...
Montagevideo starten
Installation video for window films. Click on the picture to start.

Assembly instructions for Privacy films (self-adhesive)

You will need the following items

  • Plastic bottle with spray head or with hand sprayer, adhesive tape, paper towels (not included)
  • Transfer concentrate (not included)
  • Glass cleaner (not included)
  • or commercially available glass cleaner
  • Installation squeegee and glass scraper blade (included free of charge in the delivery)
  • .

    Installation tips

    • Two people should carry out the installation!
    • Do not install any film at temperatures on the installation side below +6° C.
    1. Fill the spray bottle with 0.5 litres of water and add the transfer concentrate (30 ml) (enough for approx. 6 to 7 m² of glass surface).
    2. Thoroughly clean the glass with commercial or our glass cleaner!
      Remove all sticky particles (e.g. paint or fly dirt) preferably with the glass scraper blade
    3. . No dirt residues should remain on the glass!
    4. The sandblasting foil consists of the mostly white backing paper and the actual sandblasting foil.
      Now place the sandblasting foil with the view side down on the glass pane or similar. You are now looking at the back of the film.
      Then carefully and slowly peel off the backing paper at as shallow an angle as possible until it is about halfway along the entire length of the film. Cut the backing paper and stick it back onto the sandblasting film with a gap of about 2 cm to the remaining backing paper.
    5. Now hold the in place while the 2nd person starting from the corner, and at the same time spray the adhesive side of the that is now exposed with the liquid.
      Afterwards, the glass pane (surface to be pasted) must be sprayed with the liquid. Do not be sparing with the liquid, the film and pane should be well wet.
    6. Place the on the glass, the film should slide back and forth well, otherwise spray the glass again.
    7. Now spray the other side of the as well, this will make it easier for you to work with the mounting squeegee.
    8. Now press the liquid out evenly with the mounting squeegee from the centre to the right and to the left. Make sure that there is no residual water left under the film! Repeat this procedure several times to remove even invisible water residues. When doing this, wrap the supplied squeegee with a paper towel to avoid any scratches.
    9. Carefully wipe the edges and the foil with a soft cloth. If necessary, press the edges again with the mounting squeegee.
    10. Now let the dry for three days without touching it.
    11. Wait two weeks before cleaning the film for the first time and never use hard objects (brush or blade) to clean it. Commercially available glass cleaners can be used.

    FAQ`s about the installation

    Can I carry out the film installation alone?

    Films that are no larger than 1m² can be installed alone without any problems.
    For larger pieces, it is recommended that two people carry out the installation. This makes it easier to handle the film and place it on the pane.

    How can I avoid dust inclusions under the adhesive back side?

    First, clean your windows really thoroughly with glass cleaner. Then go over the entire window pane again with our supplied glass scraper blade to remove any hard-core impurities on the pane (such as fly droppings). These fine stains are often invisible to the naked eye and you will be amazed at what the blade still removes.

    In addition, do not lay the after peeling off (covers the adhesive side for transport) on the floor to get it wet. Rather, pull a table nearby to spray the film on. On the floor you will always stir up very fine dust particles, which will then settle on the adhesive side facing upwards. These dust particles can later show up on the pane under the , which is something to avoid.

    Can I apply the without transfer concentrate?

    Alternatively, you should at least use a pH-neutral cleaner. We do not recommend installation without any additive at all, which increases the gliding properties of the water!

    We strongly advise against the use of water diluted with detergent. This can lead to streaking due to a reaction with the film adhesive.

    Does the film have to be applied perfectly to the glass at the first attempt?

    No, this is not necessary as long as you have sprayed the adhesive side of the window film and your glass sufficiently wet. Due to the moisture, the adhesive has no adhesive effect, which makes it easy to move the film and position it precisely. It is even possible to remove the film from the glass again and reapply it.

    After mounting, small bubbles formed the next day

    The bubbles consist of residual liquid that was not pressed out from under the film when it was applied. Over time, these run down between the already drying film adhesive as far as they can under the film and collect in some places. The bubbles disappear by themselves when the remaining liquid diffuses through the film to the outside. Depending on the outside temperature and sunlight, this can take up to three or more weeks before the film fits like a second skin.

    In any case, you should wait this time and do nothing. In most cases, the blisters disappear all by themselves!

    How easy is it to remove the film?

    The window film itself can be easily removed. To do this, detach one corner and fold it over directly. The film can then be removed from the glass at as flat an angle as possible.

    It is possible that residues of the film adhesive remain in some places. These can be soaked with our adhesive remover or acetone and then removed again with a glass scraper or ceramic field scraper. You will find detailed instructions on how to remove window films on our homepage in the FAQ`s.
Order a product sample...

We will be happy to send you a free sample of this and up to four other films without obligation.
The samples are approx. 9 x 9 cm in size and will be sent to you free of charge and without obligation by letter post.

1. select sample (max. 5 pieces)
Mother-of-pearl colour effect film, warm, opaque Mother-of-pearl colour effect film, warm, opaque
Art.-Nr. 223904
Please select at least one sample!
2. Specify shipping address
Flat, floor, etc. (optional)
Germany
I accept the privacy policy.
Thank you very much!
We have received your foil requests.
The samples are usually sent to you within one working day.
Compare articles
Privacy screen
Privacy screen (daytime)
Light transmission
Transparency
Design
Property
Colour
Mounting side
UV protection - percent
Durability

Assembly instructions

Montagevideo starten
Installation video for window films. Click on the image to start.

Tool for easy assembly

The tool sets and accessories offered by Velken will be very useful for the success of your installation! Adhesive films, electrostatic films, decorative coatings... for each product there is the appropriate tool.

In addition to the assembly video, take a look at the detailed assembly instructions.

- 30 %
Assembly set professional
(86)
This installation set is ideal for medium-sized film installations of up to five windows with a maximum area of 2m² each . You save almost 23% with this bundle compared to the individual components.
040020 - Assembly set professional
€14.25 €9.95
NEW
Hologram colour effect film, opaque
  • Indoor assembly
  • self-adhesive
Privacy screen by day and night:
Light transmission:
€36.90 / m²
NEW
Dichroic colour effect film, warm, opaque
  • Indoor assembly
  • self-adhesive
Privacy screen by day and night:
Light transmission:
€43.96 / m²
NEW
Dichroic colour effect film, cold, opaque
  • Indoor assembly
  • self-adhesive
Privacy screen by day and night:
Light transmission:
€43.96 / m²
NEW
Rainbow colour effect film, warm, transparent
  • Indoor assembly
  • self-adhesive
Privacy screen by day:
Light transmission:
€40.37 / m²
NEW
Mother-of-pearl colour effect film, cold, opaque
  • Indoor assembly
  • self-adhesive
Privacy screen by day and night:
Light transmission:
€43.96 / m²
NEW
Mother-of-pearl colour effect film, warm, opaque
  • Indoor assembly
  • self-adhesive
Privacy screen by day and night:
Light transmission:
€43.96 / m²
Rainbow colour effect film
(6)
  • Indoor assembly
  • self-adhesive
Privacy screen by day:
Light transmission:
€39.90 / m²
NEW
TIP!
NEW
NEW
Tile film, birch
Tile film, birch
€32.40 / m²
Questions & Answers
No questions have been asked so far.
Ask a question
Your question will be publicly visible and can - in addition to our support - also be answered by a member of our community. answered by a member of our community. You can enter your publicly visible name and your email notifications in your customer account. configure.
Reviews 0
Be the first to rate this article!
Write a review now!
Last viewed