Adhesive film, Frosted

(6)
  • glueless
  • Indoor assembly
Adhäsionsfolie Frosted
Die Durchsicht bei Adhäsionsfolie Frosted
Adhäsionsfolie Frosted im Detail
Adhäsionsfolie Frosted in Außenansicht bei Nacht
Adhäsionsfolie Frosted Design auf einer Haustür
Adhäsionsfolie im Design Frosted auf einem Badezimmer Fenster
Adhäsiosfolie in Frostglasoptik auf Fensterscheibe im Bad
Adhäsionsfolie Frosted auf einem Badezimmerfenster angebracht.
Kleberlose Folie Frosted auf einem Küchenfenster angebracht.
Geometry Linear metre
Rectangle
Square
Pentagon with slope
Rectangle with bevel
Rectangle with two slopes
symmetric trapezoid
right triangle
symmetrical triangle
Gable window
Rectangle with segmental arch
Rectangle with basket arch
Rectangle with semicircle
Quarter circle
Circle
Semicircle
Circle section
Oval / Ellipse
Available in the dimensions:
min. 5,0 x 5,0 cm
max. 119 x 5.000,0 cm
Width [cm]
Height [cm]
from €1.00

Price per m² from: €37.82 Price per m²: €34.04 Price per m²: €37.82 incl. VAT plus shipping costs. Item no. 281075

Order accessories directly

Facilitates the installation of window films immensely! The films can be positioned on the glass without sticking. The concentrate is sufficient for an area of approx. 6m². The appropriate quantity is offered in the shopping basket.

Transfer concentrate
€3.40

This installation set is suitable for smaller film installations of only a few windows with an area of around 1m² each. The set price saves you over 15% compared to the individual components.

Mounting set
€4.95

This installation set is ideal for medium-sized film installations of up to five windows with a maximum area of 2m² each . You save almost 23% with this bundle compared to the individual components.

Assembly set professional
€9.95

Delivery time approx. 1-4 days

CNC cutting accurate to the millimetre

free assembly tool

Questionst?
Start WhatsApp chat
Thanks to a design that is reminiscent of frozen water, this window film offers good visual...

Thanks to a design that is reminiscent of frozen water, this window film offers good visual protection that becomes very high just a few centimetres behind the film. This makes it possible to see objects in a shadowy way, while details become less and less visible as the distance increases.

In addition to the visual protection, this window film convinces with its high light transmission. Daylight can still illuminate the room through this colourless film.

The scratch-resistant surface of the self-adhesive film makes it easy to clean with standard glass cleaners.

Included in delivery

You should definitely order the transfer concentrate, art. no. 020010 additionally. It makes the installation easier and leads to a better result. Alternatively, you can also use a pH-neutral cleaner. This must be pH-neutral to prevent streaks from forming together with the film adhesive!

Any offcuts are not included in the scope of delivery.

Technical data and information at a glance...

Manufacturer's guarantee

The adhesive privacy film is a composite adhesive film made of PET and soft PVC. It is dimensionally stable with a high UV resistance.

The durability and adhesive strength of the films for interior installation are up to 10 years, depending on various factors.

Technical data
Material PET and soft PVC
Film thickness approx. 100 µm
Adhesive static (without adhesive)
Temperature range -10° C to + 50° C

Mounting recommendation

Based on technical data and extensive experience, we can recommend mounting on the following vertically installed glass types:

These recommendations can still lead to glass breakage due to various factors at the installation site. In accordance with our AGB, §10 paragraph 3, we accept no liability for this.

Answers to the most frequently asked questions...

General questions

Can I get a free foil sample?

Of course, please click on this link to access the corresponding order form. You are welcome to add to the list of items if you wish. There are no costs for you!

Will you also cut the film for me?

We cut each film to the exact millimetre according to the dimensions you enter. The cutting is free of charge. You can find detailed instructions on how to measure your panes here.

Alternatively, you can also cut your film by hand with a cutter knife. However, this requires a little manual skill, so you are usually better off using our free service.

Can you also cut a round blank or other geometry?

In general, almost all 2D shapes can be produced. Many geometries (e.g. triangles, trapezoids, circles) can be ordered directly via the online shop. To do so, please click on the orange rectangle to the right of the article image. You can then choose between many different shapes.

For shapes that are not specified, please send us a small sketch (photo) in which you specify the side lengths, radii or angles. Please contact us for this purpose.

Does the film also adhere to surfaces other than glass?

The window film adheres to all surfaces that are approximately as smooth as glass. When applying the film to plastic, please bear in mind that the adhesive may bond with the plastic, making it impossible to remove the film cleanly later.

How can I clean my window pane with the film in place?

You can keep your window pane clean as usual. The film should not be rubbed with sharp-edged objects (e.g. a brush).
You can find more information in our guide General care instructions for window films.

Can the film be removed without leaving any residue?

All window films can be removed without leaving any residue and without damaging the glass surface!
Below you will find detailed instructions on how to remove old window films.

Can you also print on films?

Unfortunately, we do not currently offer foil printing and do not have any partner companies with whom we can realise foil printing.

How to mount this film on the window...
Montagevideo starten
Installation video for window films. Click on the picture to start.

Assembly instructions for Adhesive films

You will need the following items

  • Plastic bottle with spray head or with hand sprayer, adhesive tape, paper towels (not included)
  • Transfer concentrate (not included)
  • Glass cleaner (not included)
  • or commercially available glass cleaner
  • Installation squeegee and glass scraper blade (included free of charge in the delivery)
  • .

    Installation tips

    • Two people should carry out the installation!
    • Do not install any film at temperatures on the installation side below +6° C.
    1. Fill the spray bottle with 0.5 litres of water and add the transfer concentrate (30 ml) (enough for approx. 6 to 7 m² of glass surface).
    2. Thoroughly clean the glass with commercial or our glass cleaner!
      Remove all sticky particles (e.g. paint or fly dirt) preferably with the glass scraper blade
    3. . No dirt residues should remain on the glass!
    4. The sandblasting foil consists of the mostly white backing paper and the actual sandblasting foil.
      Now place the sandblasting foil with the view side down on the glass pane or similar. You are now looking at the back of the film.
      Then carefully and slowly peel off the backing paper at as shallow an angle as possible until it is about halfway along the entire length of the film. Cut the backing paper and stick it back onto the sandblasting film with a gap of about 2 cm to the remaining backing paper.
    5. Now hold the Adhesive foils in place while the 2nd person
    6. Place the Adhesive foils on the glass, the film should slide back and forth well, otherwise spray the glass again.
    7. Now spray the other side of the Adhesive foils as well, this will make it easier for you to work with the mounting squeegee.
    8. Now press the liquid out evenly with the mounting squeegee from the centre to the right and to the left. Make sure that there is no residual water left under the film! Repeat this procedure several times to remove even invisible water residues. When doing this, wrap the supplied squeegee with a paper towel to avoid any scratches.
    9. Carefully wipe the edges and the foil with a soft cloth. If necessary, press the edges again with the mounting squeegee.
    10. Now let the Adhesive foils dry for three days without touching it.
    11. Wait two weeks before cleaning the film for the first time and never use hard objects (brush or blade) to clean it. Commercially available glass cleaners can be used.

    FAQ`s about the installation

    Can I carry out the film installation alone?

    Films that are no larger than 1m² can be installed alone without any problems.
    For larger pieces, it is recommended that two people carry out the installation. This makes it easier to handle the film and place it on the pane.

    How can I avoid dust inclusions under the sides?

    First, clean your windows really thoroughly with glass cleaner. Then go over the entire window pane again with our supplied glass scraper blade to remove any hard-core impurities on the pane (such as fly droppings). These fine stains are often invisible to the naked eye and you will be amazed at what the blade still removes.

    In addition, do not lay the Adhesive foils after peeling off (covers the adhesive side for transport) on the floor to get it wet. Rather, pull a table nearby to spray the film on. On the floor you will always stir up very fine dust particles, which will then settle on the adhesive side facing upwards. These dust particles can later show up on the pane under the Adhesive foils, which is something to avoid.

    Can I apply the Adhesive foils without transfer concentrate?

    Alternatively, you should at least use a pH-neutral cleaner. We do not recommend installation without any additive at all, which increases the gliding properties of the water!

    We strongly advise against the use of water diluted with detergent. This can lead to streaking due to a reaction with the film adhesive.

    Does the film have to be applied perfectly to the glass at the first attempt?

    How easy is it to remove the film?

Order a product sample...

We will be happy to send you a free sample of this and up to four other films without obligation.
The samples are approx. 9 x 9 cm in size and will be sent to you free of charge and without obligation by letter post.

1. select sample (max. 5 pieces)
Adhesive film, Frosted Adhesive film, Frosted
Art.-Nr. 281075
Please select at least one sample!
2. Specify shipping address
Flat, floor, etc. (optional)
Germany
I accept the privacy policy.
Thank you very much!
We have received your foil requests.
The samples are usually sent to you within one working day.
- 30 %
- 22 %
Mounting set
(27)
Mounting set
€6.35 €4.95
Questions & Answers
No questions have been asked so far.
Ask a question
Your question will be publicly visible and can - in addition to our support - also be answered by a member of our community. answered by a member of our community. You can enter your publicly visible name and your email notifications in your customer account. configure.
Reviews 6

Customer reviews

∅ 5,0   from 5 stars for 6 ratings
5 Stars
(6)
4 Stars
(0)
3 Stars
(0)
2 Stars
(0)
1 Star
(0)
Write a review now!
5 month agoVerified purchase
Haustüre neu gestaltet

Unsere Haustüre ist fast fertig. Bisher hatten wir einen Vorhang als Sichtschutz. Nun haben wir die Folien bestellt, perfekt geschnitten, gut anzubringen und schnell geliefert. Vielen Dank

9 month agoVerified purchase
Perfekt

Folie super genau zugeschnitten, Maße waren perfekt.
Die Folie passt gut in unser Bad und erfüllt zu 100 %
den Zweck. Prompte Lieferung. Alles super. Vielen Dank.

2 years agoVerified purchase
Sehr dekorative Fensterfolie!

Hochwertige Folie, idealer Sichtschutz, trotzdem lichtdurchlässig, prompte Lieferung, einfache Montage, hält sogar auf wettergeschützter Seite am Aussenfenster, eine 100%ige Empfehlung!

2 years agoVerified purchase
Wie erwartet: Sehr gut!

Prompte Lieferung, sehr gut verpackt. Montage dank Montageset und perfekter Montageanleitung problemlos. Folie kommt beim Badezimmerfenster zum Einsatz, gegenüber ein Haus, ein Durchblick unmöglich. Das Frost-Muster passt wunderbar als Bad-Motiv.

2 years agoVerified purchase
schöne Muster,sehr gute Sichtschutz

Schnelle Lieferung, sehr gut eingepackt, einfache Montage. Ich habe die Folie für das Bad gekauft und bin ich sehr zufrieden. Nur in einer Stelle hat die Folie kleinen Fehler, den kann nur abends beim Licht sehen. Das Fenster war sorgfältig geputzt und das ist auch kein Wasser. Trotzdem kann ich dieses Produkt weiter empfehlen.

3 years agoVerified purchase
Tolle Folie!

Das Anbringen der Folie war kinderleicht. Wir sind mit dem Ergebnis sehr zufrieden.
Die Möglichkeit sich Musterfolien schicken zu lassen sollte man nutzen, da fällt die Entscheidung bei dieser großen Auswahl gleich leichter.

Last viewed