Scratch protection film, matt anti-reflective for touchscreens
- self-adhesive
- Indoor assembly




Price per m² from: €69.90 Price per m²: €62.91 Price per m²: €69.90 incl. VAT plus shipping costs. Item no. 593020
Delivery time approx. 2-4 days
CNC cutting accurate to the millimetre
free assembly tool
Application | Displays |
Temperature resistant | -10°C to +50°C |
Property | transparent |
Colour | transparent |
Liability | self-adhesive |
Material thickness | approx. 125 µm |
Mounting side | Indoor assembly |
Protection from | Light |
Start WhatsApp chat
Self-adhesive scratch protection film matt anti-reflective for displays
The self-adhesive scratch protection film for displays and touchscreens is the perfect solution to protect your valuable devices from unsightly scratches and fingerprints. With its matt anti-reflective appearance, it gives your screen a pleasant look and ensures a glare-free display, even in bright environments.
This high-quality 125 µm thick film is specially designed to preserve the brilliance and clarity of your display, while providing excellent scratch resistance. Thanks to the innovative adhesive technology, the film can be applied effortlessly and without bubbles. The product uses a silicone adhesive layer that allows for easy and bubble-free installation. It stays firmly in place and offers reliable protection against daily wear and tear. The film is repositionable thanks to this technology and leaves no residue after removal! The film can simply be lifted at one corner and removed again.
The film's matt anti-reflective surface significantly reduces annoying reflections, improving your visibility and legibility. Whether you use your smartphone, tablet, laptop or other electronic device, this scratch protection film allows you to use it clearly and comfortably, even under unfavourable light conditions.
In addition, the film is extremely durable and easy to clean. Fingerprints, dirt and dust can be removed effortlessly with a soft cloth without leaving any residue. Protect your valuable display with the self-adhesive scratch protection film, which not only offers reliable protection, but also ensures a matt, anti-reflective look. Experience clear visibility, crisp images and protect your device from unsightly scratches - all with just one simple application of this high-quality film.
Applicable in many areas
This screen protector film provides anti-reflective protection for touchscreens of modern devices that are controlled by touch. Such as smartphones, mobile phones, tablet computers, monitors, digital cameras and car navigation systems. The anti-reflective film is hard-coated and offers optimal transparency and scratch resistance with good chemical resistance.
Advantages of this anti-reflection film in summary
- Reduction of reflections
- Multitouch optimised
- Anti fingerprint
- Protects against mechanical damage
- Easy cleaning
- Easy to install
- No residue after removal
We recommend applying a sample before purchase to test the anti-reflective effect and touch capability. The film sample will be sent by us free of charge.
The product image may differ from the original and serves only as a non-binding preview.
Included in delivery
- Detailed installation instructions
The scope of delivery does not include any offcuts or the mounting squeegee with felt edge, art. no. 010150. Please order these at the same time.
Technical data | |
---|---|
Material | PET |
Film thickness | approx. 125 µm |
Hard coating | Yes |
Adhesive | Silicone Adhesive layer |
Adhesive force | 0,02 N/25mm |
Antibacterial | no |
Haze | 11,9% |
Light transmission | 90.5% |

Assembly instructions for Protective films (self-adhesive)
You will need the following items
- Plastic bottle with hand sprayer, adhesive tape, paper towels (not included)
- Transfer concentrate (not included)
- Glass cleaner (not included) or commercially available glass cleaner
- Installation squeegee and Glass scraper blade (included free of charge in the delivery).
Installation tips
- Two people should carry out the installation!
- Do not install any film at temperatures on the installation side below +6° C.
- Fill the spray bottle with 0.5 litres of water and add the transfer concentrate (30 ml) (enough for approx. 6 to 7 m² of glass surface).
-
Thoroughly clean the glass with commercial or our glass cleaner!
Remove all sticky particles (e.g. paint or fly dirt) preferably with the Glass scraper blade. No dirt residues should remain on the glass! - The sandblasting foil consists of the mostly white backing paper and the actual sandblasting foil.
Now place the sandblasting foil with the view side down on the glass pane or similar. You are now looking at the back of the film.
Then carefully and slowly peel off the backing paper at as shallow an angle as possible until it is about halfway along the entire length of the film. Cut the backing paper and stick it back onto the sandblasting film with a gap of about 2 cm to the remaining backing paper. - Now hold the in place while the 2nd person
starting from the corner, and at the same time spray the adhesive side of the that is now exposed with the liquid.
Afterwards, the glass pane (surface to be pasted) must be sprayed with the liquid. Do not be sparing with the liquid, the film and pane should be well wet. - Place the on the glass, the film should slide back and forth well, otherwise spray the glass again.
- Now spray the other side of the as well, this will make it easier for you to work with the mounting squeegee.
- Now press the liquid out evenly with the mounting squeegee from the centre to the right and to the left. Make sure that there is no residual water left under the film! Repeat this procedure several times to remove even invisible water residues. When doing this, wrap the supplied squeegee with a paper towel to avoid any scratches.
- Carefully wipe the edges and the foil with a soft cloth. If necessary, press the edges again with the mounting squeegee.
- Now let the dry for three days without touching it.
- Wait two weeks before cleaning the film for the first time and never use hard objects (brush or blade) to clean it. Commercially available glass cleaners can be used.
FAQ`s about the installation
Can I carry out the film installation alone?
For larger pieces, it is recommended that two people carry out the installation. This makes it easier to handle the film and place it on the pane.
How can I avoid dust inclusions under the adhesive back side?
In addition, do not lay the after peeling off (covers the adhesive side for transport) on the floor to get it wet. Rather, pull a table nearby to spray the film on. On the floor you will always stir up very fine dust particles, which will then settle on the adhesive side facing upwards. These dust particles can later show up on the pane under the , which is something to avoid.
Can I apply the without transfer concentrate?
We strongly advise against the use of water diluted with detergent. This can lead to streaking due to a reaction with the film adhesive.
Does the film have to be applied perfectly to the glass at the first attempt?
After mounting, small bubbles formed the next day
In any case, you should wait this time and do nothing. In most cases, the blisters disappear all by themselves!
How easy is it to remove the film?
It is possible that residues of the film adhesive remain in some places. These can be soaked with our adhesive remover or acetone and then removed again with a glass scraper or ceramic field scraper. You will find detailed instructions on how to remove window films on our homepage in the FAQ`s.
We will be happy to send you a free sample of this and up to four other films without obligation.
The samples are approx. 9 x 9 cm in size and will be sent to you free of charge and without obligation by letter post.
1. select sample (max. 5 pieces)
|
||
![]() |
Scratch protection film, matt anti-reflective for touchscreens Art.-Nr. 593020 |
|
Please select at least one sample!
|
||
- Germany
- Austria
- Switzerland
- Belgium
- Denmark
- France
- Gibraltar
- Greece
- Ireland
- Italy
- Liechtenstein
- Luxembourg
- Malta
- Monaco
- Netherlands
- Norway
- Poland
- Portugal
- Sweden
- Slovakia
- Slovenia
- Spain
- Czech Republic
- United Kingdom
- United States of America
We have received your foil requests.
The samples are usually sent to you within one working day.

Expert adviser Thomas de Jong - Customer support
» Open questions about one of our articles? I'll be happy to answer them for you! «
















Rate this item objectively and share your buying experience with other visitors.
As a thank you, we will reward you with a shopping voucher* of up to 10€ for your next purchase.
*Voucher valid for 1 year, redeemable from 30€ value of goods (5€ voucher) or 50€ value of goods (10€ voucher), max. 1 voucher per order, not combinable.
The voucher will then be sent to you by email.
You will receive an email from us after the rating has been activated in which you will find the shopping voucher.
New reviews are activated by us every working day.
The company Velken-Folientechnik GmbH accepts this assignment and ensures the necessary data protection.