Anti-reflective film for tablet & laptop

  • self-adhesive
  • Indoor assembly
Anti-reflective film for tablet & laptop Fenster ohne Folie
Anti-reflective film for tablet & laptop
Geometry Linear metre
Rectangle
Square
Pentagon with slope
Rectangle with bevel
Rectangle with two slopes
symmetric trapezoid
right triangle
symmetrical triangle
Gable window
Rectangle with segmental arch
Rectangle with basket arch
Rectangle with semicircle
Quarter circle
Circle
Semicircle
Circle section
Oval / Ellipse
Available in the dimensions:
min. 5,0 x 5,0 cm
max. 124 x 2.000,0 cm
Width [cm]
Height [cm]
from €2.20

Price per m² from: €69.90 Price per m²: €62.91 Price per m²: €69.90 incl. VAT plus shipping costs. Item no. 551032

Order accessories directly

A wonderful cleaning cloth for surfaces of all kinds! Moisture is absorbed quickly and well.

Microfibre universal cloth
€1.95

The ideal care cloth for drying and polishing our films and additionally many other types of glass such as panes, mirrors and much more!

Foil polishing cloth
€4.95

This glass cleaner with anti-soiling effect removes even coarse soiling in no time. The spray bottle makes application easy and clean.

Surface & Glass Cleaner 500 ml
€6.95

Delivery time approx. 2-4 days

CNC cutting accurate to the millimetre

free assembly tool

Properties of this film
Application
Displays
Temperature resistant
-10°C to +50°C
Glare reduction
very high
UV protection
without (< 99%)
Property
transparent
Transparency
high
Colour
transparent
Liability
self-adhesive
Material thickness
approx. 125 µm
Mounting side
Indoor assembly
Protection from
Light
Privacy screen
low
Questionst?
Start WhatsApp chat
Reduce unwelcome reflections on your tablet or laptop This anti-reflective film reduces...

Reduce unwelcome reflections on your tablet or laptop

This anti-reflective film reduces unpleasant reflections on tablets and laptops with a glossy coating (glare), which can be caused by sunlight falling on the back.
The clear and pin-sharp view of the display remains undisturbed thanks to the very high transparency of this anti-reflection film. Only the contrast values of the tablet are slightly reduced by the minimally rough film surface. With most devices, the contrast value can be increased in the settings to counteract this.

This anti-reflective film is used on small tablets for web surfing, e-readers or control centres for smart homes. Medium-sized tablets for streaming on the move or video conferencing are also suitable, right up to large tablets used for graphics projects or product presentations. In addition, the film is equally suitable for anti-reflection coating of laptop displays.

Glare-free operation of the tablet

This anti-reflective film provides anti-glare protection for the screens of modern tablets even when they can be controlled by touch. The anti-reflective film is hard-coated and offers optimal transparency and scratch resistance with good chemical resistance.

The product uses a silicone adhesive layer that allows for easy and bubble-free installation. This technology allows the film to be repositioned and leaves no residue after removal! The film can simply be lifted at one corner and removed again.

Advantages of this anti-reflective film for tablet & laptop

  • Reduction of reflections
  • Multitouch optimised
  • Anti fingerprint
  • Protects against mechanical damage
  • Easy cleaning
  • Easy to install
  • No residues after removal

We recommend that you carry out an application with a sample piece before purchase in order to test the anti-reflective effect and also touch capability if necessary. The film sample will be sent by us free of charge.
The product image may differ from the original and serves only as a non-binding preview.

Attention for Elo Touch Displays
The touch capability of Elo touch displays with IntelliTouch® technology may no longer be available after applying the film.

Included in delivery

  • Mounting squeegee with felt edge, art. no. 010150
  • Detailed mounting instructions

The scope of delivery does not include any offcuts.

Popular tablets in the 7-13 inch size range are

  • Apple iPad mini 5 (7.9 inch), Samsung Galaxy Tab Active 2 (8 inch), Lenovo Tab M8 (8 inch)
  • Huawei Mate Pad T10s (9.7 inches), Microsoft Surface Go 2 (10.5 inches), Apple iPad Air 3 (10.5 inches)
  • Apple iPad Pro 11" (11 inch), Samsung Galaxy Tab S7 (11 inch), Lenovo Tab P11 (11 inch)
  • Microsoft Surface Pro 7 (12.3 inches), Samsung Galaxy Tab S7+ (12.4 inches), Apple iPad Pro 12.9" (12.9 inches)

Tabelt display size chart inches in centimetres

Here you can find an anti-reflective film for your tablet. We have converted the most common inch sizes in width and height. All measurements are in centimetres [cm]. You can enter these in the input fields of the film configurator on this page. These values may differ slightly from your tablet!

InchWidth in cm (16:9)Height in cm (16:9)Diagonal
1 inch 2.61 cm 1.47 cm
7.9 inch 17.5 cm 9.8 cm 20.1 cm
8 inch 17.7 cm 10.0 cm 20.3 cm
10.5 inch 23.2 cm 13.1 cm 26.7 cm
12.3 inch 27.2 cm 15.3 cm 31.2 cm
12.4 inch 27.5 cm 15.4 cm 31.5 cm
12.9 inch 28.6 cm 16.1 cm 32.8 cm
Technical data and information at a glance...
Technical data
Material PET
Film thickness approx. 125 µm
Hard coating Yes
Adhesive Silicone Adhesive layer
Adhesive force 0,02 N/25mm
Antibacterial no
Haze 11,9%
Light transmission 90.5%
How to mount this film on the window...
Montagevideo starten
Installation video for window films. Click on the picture to start.

Assembly instructions for Protective films (self-adhesive)

You will need the following items

Installation tips

  • Two people should carry out the installation!
  • Do not install any film at temperatures on the installation side below +6° C.
  1. Fill the spray bottle with 0.5 litres of water and add the transfer concentrate (30 ml) (enough for approx. 6 to 7 m² of glass surface).
  2. Thoroughly clean the glass with commercial or our glass cleaner!
    Remove all sticky particles (e.g. paint or fly dirt) preferably with the glass scraper blade. No dirt residues should remain on the glass!
  3. The sandblasting foil consists of the mostly white backing paper and the actual sandblasting foil.
    Now place the sandblasting foil with the view side down on the glass pane or similar. You are now looking at the back of the film.
    Then carefully and slowly peel off the backing paper at as shallow an angle as possible until it is about halfway along the entire length of the film. Cut the backing paper and stick it back onto the sandblasting film with a gap of about 2 cm to the remaining backing paper.
  4. Now hold the in place while the 2nd person starting from the corner, and at the same time spray the adhesive side of the that is now exposed with the liquid.
    Afterwards, the glass pane (surface to be pasted) must be sprayed with the liquid. Do not be sparing with the liquid, the film and pane should be well wet.
  5. Place the on the glass, the film should slide back and forth well, otherwise spray the glass again.
  6. Now spray the other side of the as well, this will make it easier for you to work with the mounting squeegee.
  7. Now press the liquid out evenly with the mounting squeegee from the centre to the right and to the left. Make sure that there is no residual water left under the film! Repeat this procedure several times to remove even invisible water residues. When doing this, wrap the supplied squeegee with a paper towel to avoid any scratches.
  8. Carefully wipe the edges and the foil with a soft cloth. If necessary, press the edges again with the mounting squeegee.
  9. Now let the dry for three days without touching it.
  10. Wait two weeks before cleaning the film for the first time and never use hard objects (brush or blade) to clean it. Commercially available glass cleaners can be used.

FAQ`s about the installation

Can I carry out the film installation alone?

Films that are no larger than 1m² can be installed alone without any problems.
For larger pieces, it is recommended that two people carry out the installation. This makes it easier to handle the film and place it on the pane.

How can I avoid dust inclusions under the adhesive back side?

First, clean your windows really thoroughly with glass cleaner. Then go over the entire window pane again with our supplied glass scraper blade to remove any hard-core impurities on the pane (such as fly droppings). These fine stains are often invisible to the naked eye and you will be amazed at what the blade still removes.

In addition, do not lay the after peeling off (covers the adhesive side for transport) on the floor to get it wet. Rather, pull a table nearby to spray the film on. On the floor you will always stir up very fine dust particles, which will then settle on the adhesive side facing upwards. These dust particles can later show up on the pane under the , which is something to avoid.

Can I apply the without transfer concentrate?

Alternatively, you should at least use a pH-neutral cleaner. We do not recommend installation without any additive at all, which increases the gliding properties of the water!

We strongly advise against the use of water diluted with detergent. This can lead to streaking due to a reaction with the film adhesive.

Does the film have to be applied perfectly to the glass at the first attempt?

No, this is not necessary as long as you have sprayed the adhesive side of the window film and your glass sufficiently wet. Due to the moisture, the adhesive has no adhesive effect, which makes it easy to move the film and position it precisely. It is even possible to remove the film from the glass again and reapply it.

After mounting, small bubbles formed the next day

The bubbles consist of residual liquid that was not pressed out from under the film when it was applied. Over time, these run down between the already drying film adhesive as far as they can under the film and collect in some places. The bubbles disappear by themselves when the remaining liquid diffuses through the film to the outside. Depending on the outside temperature and sunlight, this can take up to three or more weeks before the film fits like a second skin.

In any case, you should wait this time and do nothing. In most cases, the blisters disappear all by themselves!

How easy is it to remove the film?

The window film itself can be easily removed. To do this, detach one corner and fold it over directly. The film can then be removed from the glass at as flat an angle as possible.

It is possible that residues of the film adhesive remain in some places. These can be soaked with our adhesive remover or acetone and then removed again with a glass scraper or ceramic field scraper. You will find detailed instructions on how to remove window films on our homepage in the FAQ`s.
Order a product sample...

We will be happy to send you a free sample of this and up to four other films without obligation.
The samples are approx. 9 x 9 cm in size and will be sent to you free of charge and without obligation by letter post.

1. select sample (max. 5 pieces)
Anti-reflective film for tablet & laptop Anti-reflective film for tablet & laptop
Art.-Nr. 551032
Please select at least one sample!
2. Specify shipping address
Flat, floor, etc. (optional)
Germany
Here you can find our privacy policy.
Thank you very much!
We have received your foil requests.
The samples are usually sent to you within one working day.
Compare articles
Application
Temperature resistant
Glare reduction
Carrier material
UV protection
Property
Transparency
UV protection - percent
Colour
Liability
Durability
cooler temperature
Light transmission
Light transmission
Material thickness
Mounting side
Protection from
Privacy screen
Privacy screen (daytime)
Sun protection
Sun protection - Percent
Anti-reflective film for tablet & laptop
Anti-reflective film for tablet & laptop
€69.90 / m²
Displays
-10°C to +50°C
very high
Foil
without (< 99%)
transparent
high
-
transparent
self-adhesive
5 years (indoor installation)
-
90%
high
approx. 125 µm
Indoor assembly
Light
low
-
-
-
Anti-Rutsch-Folie R11
Anti-slip film R11
€29.38 / m²
- 30 %
Assembly set professional
Assembly set professional
€14.25 €9.95
Lichtdurchlässige Farbfolie selbstklebend
Translucent colour film
€34.18 / m²
Questions about the item
No questions have been asked so far.
Ask a question
Your question will be publicly visible and can - in addition to our support - also be answered by a member of our community.
Reviews 0
Be the first to rate this article!
Write a review now!
Last viewed