Antireflection film for TVs & displays

  • self-adhesive
  • Indoor assembly
Fenster ohne Folie Antireflection film for TVs & displays
Antireflection film for TVs & displays
Geometry Linear metre
Rectangle
Square
Pentagon with slope
Rectangle with bevel
Rectangle with two slopes
symmetric trapezoid
right triangle
symmetrical triangle
Gable window
Rectangle with segmental arch
Rectangle with basket arch
Rectangle with semicircle
Quarter circle
Circle
Semicircle
Circle section
Oval / Ellipse
Available in the dimensions:
min. 5,0 x 5,0 cm
max. 124 x 2.000,0 cm
Width [cm]
Height [cm]
from €2.20

Price per m² from: €69.90 Price per m²: €62.91 Price per m²: €69.90 incl. VAT plus shipping costs. Item no. 551030

Order accessories directly

This mounting squeegee with soft felt edge is ideally suited for scratch-sensitive film surfaces such as sun protection, safety and protective films.

Mounting squeegee with felt edge
€4.95

A wonderful cleaning cloth for surfaces of all kinds! Moisture is absorbed quickly and well.

Microfibre universal cloth
€1.95

The ideal care cloth for drying and polishing our films and additionally many other types of glass such as panes, mirrors and much more!

Foil polishing cloth
€4.95

This glass cleaner with anti-soiling effect removes even coarse soiling in no time. The spray bottle makes application easy and clean.

Surface & Glass Cleaner 500 ml
€6.95

Delivery time approx. 2-4 days

CNC cutting accurate to the millimetre

Properties of this film
Application
Displays
Temperature resistant
-10°C to +50°C
Property
transparent
Colour
transparent
Liability
self-adhesive
Material thickness
approx. 125 µm
Mounting side
Indoor assembly
Protection from
Light
Questionst?
Start WhatsApp chat
Self-adhesive anti-reflective film for screens and touchscreens With this anti-reflective...

Self-adhesive anti-reflective film for screens and touchscreens

With this anti-reflective film, you can reduce unpleasant reflections on televisions or displays, which can be caused by sunlight shining in from behind. The clear and pin-sharp view of the screen remains undisturbed thanks to the very high transparency of this anti-reflective film. Only the contrast values of the display are slightly reduced by the minimally rough film surface. With most devices, this can be counteracted by increasing the contrast value in the settings.

Applicable in many areas

This screen protection film provides anti-reflective protection for the screens of modern devices that are controlled by touch. For example, smartphones, mobile phones, tablet computers, monitors, digital cameras and navigation systems in cars. The anti-reflective film is hard-coated and offers optimal transparency and scratch resistance with good chemical resistance.

The product uses a silicone adhesive layer that allows for easy and bubble-free installation. This technology allows the film to be repositioned and leaves no residue after removal! The film can simply be lifted at one corner and removed again.

Advantages of this anti-reflection film

  • Reduction of reflections
  • Multitouch optimised
  • Anti fingerprint
  • Protects against mechanical damage
  • Easy cleaning
  • Easy to install
  • No residue after removal

We recommend applying a sample before purchase to test the anti-reflective effect. The film sample will be sent by us free of charge.
The product image may differ from the original and serves only as a non-binding preview.

Included in delivery

  • Mounting squeegee with felt edge, art. no. 010150
  • Detailed assembly instructions

The scope of delivery does not include any offcuts.

Technical data and information at a glance...
Technical data
Material PET
Film thickness approx. 125 µm
Hard coating Yes
Adhesive Silicone Adhesive layer
Adhesive force 0,02 N/25mm
Antibacterial no
Haze 11,9%
Light transmission 90.5%
How to mount this film on the window...
Start assembly video
Installation video for window films. Click on the picture to start.

Assembly instructions for Protective films (self-adhesive)

You will need the following items

Installation tips

  • Two people should carry out the installation!
  • Do not install any film at temperatures on the installation side below +6° C.
  1. Fill the spray bottle with 0.5 litres of water and add the transfer concentrate (30 ml) (enough for approx. 6 to 7 m² of glass surface).
  2. Thoroughly clean the glass with commercial or our glass cleaner!
    Remove all sticky particles (e.g. paint or fly dirt) preferably with the Glass scraper blade. No dirt residues should remain on the glass!
  3. The sandblasting foil consists of the mostly white backing paper and the actual sandblasting foil.
    Now place the sandblasting foil with the view side down on the glass pane or similar. You are now looking at the back of the film.
    Then carefully and slowly peel off the backing paper at as shallow an angle as possible until it is about halfway along the entire length of the film. Cut the backing paper and stick it back onto the sandblasting film with a gap of about 2 cm to the remaining backing paper.
  4. Now hold the in place while the 2nd person starting from the corner, and at the same time spray the adhesive side of the that is now exposed with the liquid.
    Afterwards, the glass pane (surface to be pasted) must be sprayed with the liquid. Do not be sparing with the liquid, the film and pane should be well wet.
  5. Place the on the glass, the film should slide back and forth well, otherwise spray the glass again.
  6. Now spray the other side of the as well, this will make it easier for you to work with the mounting squeegee.
  7. Now press the liquid out evenly with the mounting squeegee from the centre to the right and to the left. Make sure that there is no residual water left under the film! Repeat this procedure several times to remove even invisible water residues. When doing this, wrap the supplied squeegee with a paper towel to avoid any scratches.
  8. Carefully wipe the edges and the foil with a soft cloth. If necessary, press the edges again with the mounting squeegee.
  9. Now let the dry for three days without touching it.
  10. Wait two weeks before cleaning the film for the first time and never use hard objects (brush or blade) to clean it. Commercially available glass cleaners can be used.

FAQ`s about the installation

Can I carry out the film installation alone?

Films that are no larger than 1m² can be installed alone without any problems.
For larger pieces, it is recommended that two people carry out the installation. This makes it easier to handle the film and place it on the pane.

How can I avoid dust inclusions under the adhesive back side?

First, clean your windows really thoroughly with glass cleaner. Then go over the entire window pane again with our supplied Glass scraper blade to remove any hard-core impurities on the pane (such as fly droppings). These fine stains are often invisible to the naked eye and you will be amazed at what the blade still removes.

In addition, do not lay the after peeling off (covers the adhesive side for transport) on the floor to get it wet. Rather, pull a table nearby to spray the film on. On the floor you will always stir up very fine dust particles, which will then settle on the adhesive side facing upwards. These dust particles can later show up on the pane under the , which is something to avoid.

Can I apply the without transfer concentrate?

Alternatively, you should at least use a pH-neutral cleaner. We do not recommend installation without any additive at all, which increases the gliding properties of the water!

We strongly advise against the use of water diluted with detergent. This can lead to streaking due to a reaction with the film adhesive.

Does the film have to be applied perfectly to the glass at the first attempt?

No, this is not necessary as long as you have sprayed the adhesive side of the window film and your glass sufficiently wet. Due to the moisture, the adhesive has no adhesive effect, which makes it easy to move the film and position it precisely. It is even possible to remove the film from the glass again and reapply it.

After mounting, small bubbles formed the next day

The bubbles consist of residual liquid that was not pressed out from under the film when it was applied. Over time, these run down between the already drying film adhesive as far as they can under the film and collect in some places. The bubbles disappear by themselves when the remaining liquid diffuses through the film to the outside. Depending on the outside temperature and sunlight, this can take up to three or more weeks before the film fits like a second skin.

In any case, you should wait this time and do nothing. In most cases, the blisters disappear all by themselves!

How easy is it to remove the film?

The window film itself can be easily removed. To do this, detach one corner and fold it over directly. The film can then be removed from the glass at as flat an angle as possible.

It is possible that residues of the film adhesive remain in some places. These can be soaked with our adhesive remover or acetone and then removed again with a glass scraper or ceramic field scraper. You will find detailed instructions on how to remove window films on our homepage in the FAQ`s.
Order a product sample...

We will be happy to send you a free sample of this and up to four other films without obligation.
The samples are approx. 9 x 9 cm in size and will be sent to you free of charge and without obligation by letter post.

1. select sample (max. 5 pieces)
Antireflection film for TVs & displays Antireflection film for TVs & displays
Art.-Nr. 551030
Please select at least one sample!
2. Specify shipping address
Flat, floor, etc. (optional)
Germany
Here you can find our privacy policy.
Thank you very much!
We have received your foil requests.
The samples are usually sent to you within one working day.
Customer service

Foil expert Martin Siegel - Managing Director

» Do you have any questions about this item? I'm happy to help!«

Compare articles
Application
Temperature resistant
Glare reduction
Carrier material
UV protection
Property
Transparency
UV protection - percent
Colour
Liability
Durability
cooler temperature
Light transmission
Light transmission
Material thickness
Mounting side
Protection from
Privacy screen
Privacy screen (daytime)
Sun protection
Sun protection - Percent
Antireflection film for TVs & displays
Antireflection film for TVs & displays
€69.90 / m²
Displays
-10°C to +50°C
very high
Foil
without (< 99%)
transparent
high
-
transparent
self-adhesive
5 years (indoor installation)
-
90%
high
approx. 125 µm
Indoor assembly
Light
low
-
-
-
- 30 %
Assembly set professional
Assembly set professional
€14.25 €9.95
- 32 %
Mounting set
Mounting set
€7.35 €4.95
Durchsichtige Farbfolie selbstklebend
Transparent colour film
€34.18 / m²
- 30 %
Assembly set professional
Assembly set professional
€14.25 €9.95
NEW
NEW
NEW
NEW
NEW
Questions about the item4
4 Question(s) in other languages.
Click here to view these question(s).
Question:
Kann ich selber zuschneiden oder ist das brüchig danach?
Mike S. am 06. December 2022
Answer:
Die Entspiegelungsfolie kann mit einem Cuttermesser oder einer Schere selbst zugeschnitten werden.
Velken Service-Team on 06. December 2022
Compose reply
Question:
Kann man die Folie auch für kleine Bilderrahmen nehmen
Conny G. am 11. December 2022
Answer:
Theoretisch möglich, allerdings wird das Bild aufgrund der fehlenden Hintergrundbeleuchtung eines Displays weniger gut erkennbar sein. Sie können sich gerne ein kostenloses Muster bestellen und damit einen Test machen um den Effekt in echt zu sehen.
Velken Service-Team on 12. December 2022
Compose reply
Question:
Kann die Folie auch auf Glasflächen von Bilderrahmen zur Entspiegelung und gegen Lichtreflexion eingesetzt werden?
Haftet sie auch auf Glasfächen?
Martina H. am 24. February 2023
Answer:
Dafür kann die Folie eingesetzt werden und sie haftet auch auf Glasflächen problemlos.
Velken Service-Team on 24. February 2023
Compose reply
Question:
Kann man die Folie später restlos entfernen oder bleiben irgendwelche Kleberreste übrig?
Eduard B. am 06. May 2023
Answer:
Die Entspiegelungsfolie hat einen silikonbasierten Kleber, welcher keine Rückstände hinterlässt! Die Folie einfach abziehen und sie ist restlos entfernt.
Velken Service-Team on 06. May 2023
Compose reply
  Ask new question
Your question will be publicly visible and can - in addition to our support - also be answered by a member of our community.
Reviews 0
Be the first to rate this article!
Write a review now!
Last viewed