Hail protection film with sun protection, silver dark mirrored

  • self-adhesive
  • Outdoor installation
Hail protection film with sun protection, silver dark mirrored
Hail protection film with sun protection, silver dark mirrored
Hagelschaden auf einer Glasscheibe
Durch Hagel durchschlagene Doppelstegplatte
Hagelschaden auf einem Dachfenster
from €1.00

Price per m² from: €42.90 Price per m²: €38.61 Price per m²: €42.90 incl. VAT plus shipping costs. Item no. 532035

Order accessories directly

This assembly set is suitable for smaller foil assemblies of up to 6m². In the set price you save over 15% compared to the individual components.

Mounting set
€8.95

This assembly set is ideal for medium-sized film installations of 5-10 m². With this bundle you save almost 23% compared to the individual components.

Assembly set professional
€14.95

For experienced users: This edge sealing set is used to seal the edges of the film during outdoor installation. Sealing is highly recommended and protects the film from oxidation, thus significantly increasing its durability. The set price saves you over 20% compared to the individual components.

Edge sealing set
€24.90

The ideal care cloth for drying and polishing our films and additionally many other types of glass such as panes, mirrors and much more!

Foil polishing cloth
€4.95

Delivery time approx. 1-4 days

Properties of this film
Application
Glass
Temperature resistant
-30°C to +80°C
Property
mirrored
Colour
silver
Liability
self-adhesive
Material thickness
approx. 100 µm, thick (100 - 150 µm)
Mounting side
Outdoor installation
Protection from
Sun / Heat, Glass breakage
Questionst?
Start WhatsApp chat
Hail protection film with heat protection for roof windows This hail protection and sun...

Hail protection film with heat protection for roof windows

This hail protection and sun protection film combines two components at the same time: It offers protection against water penetration in the event of hail, reduces the risk of injury to cracked window glass and also works excellently as a sun protection film.

With its maximum heat reduction, it is particularly suitable for windows and doors facing south. Large windows are particularly suitable, as the loss of light is not as noticeable here. In everyday rooms with smaller windows (less than one square metre), you should perhaps forego the heat protection and switch to the clear transparent hail protection film, because it does not take away any daylight.

Advantages of this protective film against hail

  • 100 µm thick hail protection film
  • fulfils DIN EN 12600, resistance class 2B2
  • 81% solar energy rejection
  • Fire resistance class M1
  • Surface very scratch resistant
  • high UV protection (99%)

The film is used wherever damage caused by hail must be prevented, whether on vertically installed windows in the domestic sector or on roof windows. The scratch-resistant surface of the hail protection film facilitates cleaning with standard glass cleaners. It is dirt-repellent and easy to clean.

Included in delivery

You should definitely order the transfer concentrate, art. no. 020010 additionally. It makes the installation easier and leads to a better result. Alternatively, you can also use a pH-neutral cleaner. This must be pH-neutral to prevent streaks from forming together with the film adhesive!

Any offcuts are not included in the scope of delivery.

Available downloads
Technical data and information at a glance...

Manufacturer's guarantee

The manufacturer grants a guarantee of 5 years on this hail protection film with sun protection when installed vertically and a guarantee of 3 years on sloped glazing (skylights) from a roof slope of 25°. The edges of the film must be sealed all around. This guarantee covers peeling, yellowing and demetallisation of the film.

Durability

Depending on various factors, the durability of the films is up to 8 years in Central Europe. In the case of sloped glazing such as skylights with a roof slope of 25° or more, this durability is reduced accordingly due to the stronger solar radiation and the higher exposure to environmental influences.

The specifications only apply to films sealed on the outside in the area of external installation.

PropertiesOutdoor installation
Light Reflection Indoor 62%
Outdoor 62%
Transmission 17%
Solar Reflection 64%
Absorption 23%
Transmission 13%
Shading coefficient 0,23
Heat transmission coefficient (U-value) 5,91
Total energy transmittance (g-value) 0,19
Emissivity 0,84
UV reduction 99%
Glare reduction 81%
Total energy rejection (exterior) 81%

Erklärung von Lichttransmission, Reflexion, Absorbtion

The values of the properties were determined by the film manufacturer. They have been calculated on 3 mm glass using the appropriate methodology and are subject to variations in process conditions in industrial production. They are for estimation purposes only.

Technical data
Material Polyester film
Film thickness approx. 100 µm
Adhesive Pressure sensitive adhesive system

Mounting recommendation

Based on technical data and extensive experience, we can recommend mounting on the following vertically installed glass types:

Glass typeNumber of
panes
mainly
installed
U-value
W/(m²K)
Exterior
installation
Single glazing 1 (-fold) until 1978 5,7 - 5,8 yes
Double glazing 2 (-fold)
2 (-fold)
3 (-fold)
1978 - 1994
1995 - Today
1978 - 1994
3.0 - 3.4
1.2 - 2.5
2.1 - 2.4
yes
yes
yes
Thermal insulation glazing 2 (-fold)
3 (-fold)
1978 - 1994
1995 - Today
1.7 - 2.1
0.4 - 1.4
yes
no
Solar control glazing 2 (-fold)
2 (-fold)
3 (-fold)
1978 - 1994
1995 - Today
1995 - Today
1.4 - 2.0
1.0 - 2.5
0.5 - 1.3
yes
yes
yes

To avoid glass breakage, the entire pane must always be coated with this film; partial coatings are not permitted.

These recommendations may still result in glass breakage due to various factors at the installation site. According to our AGB, §10 paragraph 3 we do not accept any liability for this.

How to mount this film on the window...
Start assembly video
Installation video for window films. Click on the picture to start.

Assembly instructions for Protective films (self-adhesive)

You will need the following items

Installation tips

  • Two people should carry out the installation!
  • Do not install any film at temperatures on the installation side below +6° C.
  1. Fill the spray bottle with 0.5 litres of water and add the transfer concentrate (30 ml) (enough for approx. 6 to 7 m² of glass surface).
  2. Thoroughly clean the glass with commercial or our glass cleaner!
    Remove all sticky particles (e.g. paint or fly dirt) preferably with the Glass scraper blade. No dirt residues should remain on the glass!
  3. The sandblasting foil consists of the mostly white backing paper and the actual sandblasting foil.
    Now place the sandblasting foil with the view side down on the glass pane or similar. You are now looking at the back of the film.
    Then carefully and slowly peel off the backing paper at as shallow an angle as possible until it is about halfway along the entire length of the film. Cut the backing paper and stick it back onto the sandblasting film with a gap of about 2 cm to the remaining backing paper.
  4. Now hold the in place while the 2nd person starting from the corner, and at the same time spray the adhesive side of the that is now exposed with the liquid.
    Afterwards, the glass pane (surface to be pasted) must be sprayed with the liquid. Do not be sparing with the liquid, the film and pane should be well wet.
  5. Place the on the glass, the film should slide back and forth well, otherwise spray the glass again.
  6. Now spray the other side of the as well, this will make it easier for you to work with the mounting squeegee.
  7. Now press the liquid out evenly with the mounting squeegee from the centre to the right and to the left. Make sure that there is no residual water left under the film! Repeat this procedure several times to remove even invisible water residues. When doing this, wrap the supplied squeegee with a paper towel to avoid any scratches.
  8. Carefully wipe the edges and the foil with a soft cloth. If necessary, press the edges again with the mounting squeegee.
  9. Now let the dry for three days without touching it.
  10. Wait two weeks before cleaning the film for the first time and never use hard objects (brush or blade) to clean it. Commercially available glass cleaners can be used.

FAQ`s about the installation

Can I carry out the film installation alone?

Films that are no larger than 1m² can be installed alone without any problems.
For larger pieces, it is recommended that two people carry out the installation. This makes it easier to handle the film and place it on the pane.

How can I avoid dust inclusions under the adhesive back side?

First, clean your windows really thoroughly with glass cleaner. Then go over the entire window pane again with our supplied Glass scraper blade to remove any hard-core impurities on the pane (such as fly droppings). These fine stains are often invisible to the naked eye and you will be amazed at what the blade still removes.

In addition, do not lay the after peeling off (covers the adhesive side for transport) on the floor to get it wet. Rather, pull a table nearby to spray the film on. On the floor you will always stir up very fine dust particles, which will then settle on the adhesive side facing upwards. These dust particles can later show up on the pane under the , which is something to avoid.

Can I apply the without transfer concentrate?

Alternatively, you should at least use a pH-neutral cleaner. We do not recommend installation without any additive at all, which increases the gliding properties of the water!

We strongly advise against the use of water diluted with detergent. This can lead to streaking due to a reaction with the film adhesive.

Does the film have to be applied perfectly to the glass at the first attempt?

No, this is not necessary as long as you have sprayed the adhesive side of the window film and your glass sufficiently wet. Due to the moisture, the adhesive has no adhesive effect, which makes it easy to move the film and position it precisely. It is even possible to remove the film from the glass again and reapply it.

After mounting, small bubbles formed the next day

The bubbles consist of residual liquid that was not pressed out from under the film when it was applied. Over time, these run down between the already drying film adhesive as far as they can under the film and collect in some places. The bubbles disappear by themselves when the remaining liquid diffuses through the film to the outside. Depending on the outside temperature and sunlight, this can take up to three or more weeks before the film fits like a second skin.

In any case, you should wait this time and do nothing. In most cases, the blisters disappear all by themselves!

How easy is it to remove the film?

The window film itself can be easily removed. To do this, detach one corner and fold it over directly. The film can then be removed from the glass at as flat an angle as possible.

It is possible that residues of the film adhesive remain in some places. These can be soaked with our adhesive remover or acetone and then removed again with a glass scraper or ceramic field scraper. You will find detailed instructions on how to remove window films on our homepage in the FAQ`s.
Customer service

Foil expert Martin Siegel - Managing Director

» Do you have any questions about this item? I'm happy to help!«

BESTSELLER
Sonnenschutzfolie, silber dunkel verspiegelt für Fenster
  • Indoor or outdoor installation
  • self-adhesive
€32.90 / m²
Sonnenschutzfolie, grau verspiegelt
  • Indoor or outdoor installation
  • self-adhesive
€36.90 / m²
- 13 %
Edge sealing set
Edge sealing set
€28.80 €24.90
- 25 %
Assembly set professional
Assembly set professional
€20.20 €14.95
- 27 %
Ein Montageset mit Sprühflasche, Filzrakel und Transferkonzentrat für perfekte Ergebnisse.
Mounting set
€12.30 €8.95
Questions about the item1
1 Question(s) in other languages.
Click here to view these question(s).
Question:
Kann man diese Schutzfolie auch für Dachfenster aus Kunststoff z.B. eines Wohnwagens verwenden.
Mirko M. am 29. July 2023
Answer:
Nein dafür ist sie leider nicht geeignet. Sie sollte nur auf Glas eingesetzt werden.
Velken Service-Team on 01. August 2023
Compose reply
  Ask new question
Your question will be publicly visible and can - in addition to our support - also be answered by a member of our community.
Reviews 0
Be the first to rate this article!
Write a review now!
Last viewed