One Way Mirror & Splinter Protection Film 100 µm, silver dark mirrored

  • self-adhesive
  • Outdoor installation
One Way Mirror & Splinter Protection Film 100 µm, silver dark mirrored
Montagevideo starten
Vergleich der Tönung dunkel verspiegelter Splitter- und Sonnenschutzfolie zu ohne Folie
Spionspiegel- & Splitterschutzfolie
Geometry Linear metre
Pentagon with slope
Rectangle with bevel
Rectangle with two slopes
symmetric trapezoid
right triangle
symmetrical triangle
Gable window
Rectangle with segmental arch
Rectangle with basket arch
Rectangle with semicircle
Quarter circle
Circle section
Oval / Ellipse
Available in the dimensions:
min. 5,0 x 5,0 cm
max. 151 x 3.050,0 cm
Width [cm]
Height [cm]
from €1.05

Price per m² from: €39.90 Price per m²: €35.91 Price per m²: €39.90 incl. VAT plus shipping costs. Item no. 132630

Order accessories directly

Facilitates the installation of window films immensely! The films can be positioned on the glass without sticking. The concentrate is sufficient for an area of approx. 6m². The appropriate quantity is offered in the shopping basket.

Transfer concentrate

This installation set is suitable for smaller film installations of only a few windows with an area of around 1m² each. The set price saves you over 15% compared to the individual components.

Mounting set

This installation set is ideal for medium-sized film installations of up to five windows with a maximum area of 2m² each . You save almost 23% with this bundle compared to the individual components.

Assembly set professional

Specially designed for large projects as well as permanent use, this installation set is suitable for film installations with more than five large windows. As a set, it is approx. 33% cheaper than the individual components.

Premium mounting set

For beginners: Easy-to-apply edge sealant for up to 149 metres of film edge. Protects the film from oxidation and thus significantly increases durability. Recommended for all window films installed outdoors. Highly recommended for sloping skylights!

Edge sealing pin

For experienced users: This edge sealing set is used to seal the edges of the film during outdoor installation. Sealing is highly recommended and protects the film from oxidation, thus significantly increasing its durability. The set price saves you over 20% compared to the individual components.

Edge sealing set

Delivery time approx. 1-4 days

CNC cutting accurate to the millimetre

free assembly tool

Start WhatsApp chat
3-in-1 window film: privacy film + splinter protection film + sun protection film This spy...

3-in-1 window film: privacy film + splinter protection film + sun protection film

This spy mirror film combines three components at once: it provides visual protection during the day, protection against injuries in case of accidents and also acts as a sun protection film!

Privacy protection function

Views from the outside are effectively prevented during the day, as long as it is brighter outside than inside, the view to the outside is still possible slightly darkened.At night, when the light is switched on, the reflection is shown in a reduced form towards the inside. The view from the outside to the inside is possible again at night. This film darkens the room by a perceived 20-25%, which is noticeable in rooms that are not naturally flooded with light.

Sun protection function

With its strong heat reduction, it is particularly suitable for windows and doors facing south. Large windows are particularly suitable, as the loss of light is not so noticeable here. Solar radiation and glare are greatly reduced by this window film. Thus, the rejection of the total solar energy (reduced radiation on the glass) is 81% for the film for outdoor installation.
In addition, there is the enormously high UV protection of about 99%. This reduces the heating of the rooms, the indoor climate becomes more pleasant, the energy costs for the air conditioning are reduced, the fading of furniture and carpets is reduced and the building is visually enhanced.

Effective splinter protection against injuries

The film is used wherever accidents caused by glass breakage must be prevented, whether in the domestic sector, where e.g. small children are to be protected from glass breakage, or in the food industry, where glass splinters must not be allowed to enter the production process.
As a rule, the splinter and sun protection film should be applied on the side supposedly facing away from the impact. It also makes the burglar's job more difficult. However, this film is not approved as a burglar-resistant window film.

The scratch-resistant surface of the splinter and sun protection film makes it easy to clean with standard glass cleaners. At night, when the interior lighting is switched on, a reflection appears on the inside of the film.

Included in delivery

You should definitely order the transfer concentrate, art. no. 020010 additionally. It makes the installation easier and leads to a better result. Alternatively, you can also use a pH-neutral cleaner. This must be pH-neutral to prevent streaks from forming together with the film adhesive!

Any offcuts are not included in the scope of delivery.

Technical data and information at a glance...

Manufacturer's guarantee

The manufacturer grants a guarantee of 5 years on this splinter and sun protection film when installed vertically and a guarantee of 3 years on sloped glazing (skylights) from a roof slope of 25°. The edges of the film must be sealed all around. This guarantee covers flaking, yellowing and demetallisation of the film.


Depending on various factors, the durability of the films is up to 8 years in Central Europe. In the case of sloped glazing such as skylights with a roof slope of 25° or more, this durability is reduced accordingly due to the stronger solar radiation and the higher exposure to environmental influences.

The specifications only apply to films sealed on the outside in the area of external installation.

PropertiesOutdoor installation
Light Reflection Indoor 62%
Outdoor 62%
Transmission 17%
Solar Reflection 64%
Absorption 23%
Transmission 13%
Shading coefficient 0,23
Heat transmission coefficient (U-value) 5,91
Total energy transmittance (g-value) 0,19
Emissivity 0,84
UV reduction 99%
Glare reduction 81%
Total energy rejection (exterior) 81%

Erklärung von Lichttransmission, Reflexion, Absorbtion

The values of the properties were determined by the film manufacturer. They have been calculated on 3 mm glass using the appropriate methodology and are subject to variations in process conditions in industrial production. They are for estimation purposes only.

Technical data
Material Polyester film
Film thickness approx. 100 µm
Adhesive Pressure sensitive adhesive system

Mounting recommendation

Based on technical data and extensive experience, we can recommend mounting on the following vertically installed glass types:

To avoid glass breakage, the entire pane must always be coated with this film; partial coatings are not permitted.

These recommendations can still lead to glass breakage due to various factors at the installation site. In accordance with our AGB, §10 paragraph 3, we accept no liability for this.

Answers to the most frequently asked questions...

General questions

Can I get a free foil sample?

Of course, please click on this link to access the corresponding order form. You are welcome to add to the list of items if you wish. There are no costs for you!

Will you also cut the film for me?

We cut each film to the exact millimetre according to the dimensions you enter. The cutting is free of charge. You can find detailed instructions on how to measure your panes here.

Alternatively, you can also cut your film by hand with a cutter knife. However, this requires a little manual skill, so you are usually better off using our free service.

Can you also cut a round blank or other geometry?

In general, almost all 2D shapes can be produced. Many geometries (e.g. triangles, trapezoids, circles) can be ordered directly via the online shop. To do so, please click on the orange rectangle to the right of the article image. You can then choose between many different shapes.

For shapes that are not specified, please send us a small sketch (photo) in which you specify the side lengths, radii or angles. Please contact us for this purpose.

Does the film also adhere to surfaces other than glass?

The window film adheres to all surfaces that are approximately as smooth as glass. When applying the film to plastic, please bear in mind that the adhesive may bond with the plastic, making it impossible to remove the film cleanly later.

How can I clean my window pane with the film in place?

You can keep your window pane clean as usual. The film should not be rubbed with sharp-edged objects (e.g. a brush).
You can find more information in our guide General care instructions for window films.

Can the film be removed without leaving any residue?

All window films can be removed without leaving any residue and without damaging the glass surface!
Below you will find detailed instructions on how to remove old window films.

Can you also print on films?

Unfortunately, we do not currently offer foil printing and do not have any partner companies with whom we can realise foil printing.

How to mount this film on the window...
Montagevideo starten
Installation video for window films. Click on the picture to start.

Assembly instructions for Privacy films (self-adhesive)

You will need the following items

  • Plastic bottle with spray head or with hand sprayer, adhesive tape, paper towels (not included)
  • Transfer concentrate (not included)
  • Glass cleaner (not included)
  • or commercially available glass cleaner
  • Installation squeegee and glass scraper blade (included free of charge in the delivery)
  • .

    Installation tips

    • Two people should carry out the installation!
    • Do not install any film at temperatures on the installation side below +6° C.
    1. Fill the spray bottle with 0.5 litres of water and add the transfer concentrate (30 ml) (enough for approx. 6 to 7 m² of glass surface).
    2. Thoroughly clean the glass with commercial or our glass cleaner!
      Remove all sticky particles (e.g. paint or fly dirt) preferably with the glass scraper blade
    3. . No dirt residues should remain on the glass!
    4. The sandblasting foil consists of the mostly white backing paper and the actual sandblasting foil.
      Now place the sandblasting foil with the view side down on the glass pane or similar. You are now looking at the back of the film.
      Then carefully and slowly peel off the backing paper at as shallow an angle as possible until it is about halfway along the entire length of the film. Cut the backing paper and stick it back onto the sandblasting film with a gap of about 2 cm to the remaining backing paper.
    5. Now hold the in place while the 2nd person starting from the corner, and at the same time spray the adhesive side of the that is now exposed with the liquid.
      Afterwards, the glass pane (surface to be pasted) must be sprayed with the liquid. Do not be sparing with the liquid, the film and pane should be well wet.
    6. Place the on the glass, the film should slide back and forth well, otherwise spray the glass again.
    7. Now spray the other side of the as well, this will make it easier for you to work with the mounting squeegee.
    8. Now press the liquid out evenly with the mounting squeegee from the centre to the right and to the left. Make sure that there is no residual water left under the film! Repeat this procedure several times to remove even invisible water residues. When doing this, wrap the supplied squeegee with a paper towel to avoid any scratches.
    9. Carefully wipe the edges and the foil with a soft cloth. If necessary, press the edges again with the mounting squeegee.
    10. Now let the dry for three days without touching it.
    11. Wait two weeks before cleaning the film for the first time and never use hard objects (brush or blade) to clean it. Commercially available glass cleaners can be used.

    FAQ`s about the installation

    Can I carry out the film installation alone?

    Films that are no larger than 1m² can be installed alone without any problems.
    For larger pieces, it is recommended that two people carry out the installation. This makes it easier to handle the film and place it on the pane.

    How can I avoid dust inclusions under the adhesive back side?

    First, clean your windows really thoroughly with glass cleaner. Then go over the entire window pane again with our supplied glass scraper blade to remove any hard-core impurities on the pane (such as fly droppings). These fine stains are often invisible to the naked eye and you will be amazed at what the blade still removes.

    In addition, do not lay the after peeling off (covers the adhesive side for transport) on the floor to get it wet. Rather, pull a table nearby to spray the film on. On the floor you will always stir up very fine dust particles, which will then settle on the adhesive side facing upwards. These dust particles can later show up on the pane under the , which is something to avoid.

    Can I apply the without transfer concentrate?

    Alternatively, you should at least use a pH-neutral cleaner. We do not recommend installation without any additive at all, which increases the gliding properties of the water!

    We strongly advise against the use of water diluted with detergent. This can lead to streaking due to a reaction with the film adhesive.

    Does the film have to be applied perfectly to the glass at the first attempt?

    No, this is not necessary as long as you have sprayed the adhesive side of the window film and your glass sufficiently wet. Due to the moisture, the adhesive has no adhesive effect, which makes it easy to move the film and position it precisely. It is even possible to remove the film from the glass again and reapply it.

    After mounting, small bubbles formed the next day

    The bubbles consist of residual liquid that was not pressed out from under the film when it was applied. Over time, these run down between the already drying film adhesive as far as they can under the film and collect in some places. The bubbles disappear by themselves when the remaining liquid diffuses through the film to the outside. Depending on the outside temperature and sunlight, this can take up to three or more weeks before the film fits like a second skin.

    In any case, you should wait this time and do nothing. In most cases, the blisters disappear all by themselves!

    How easy is it to remove the film?

    The window film itself can be easily removed. To do this, detach one corner and fold it over directly. The film can then be removed from the glass at as flat an angle as possible.

    It is possible that residues of the film adhesive remain in some places. These can be soaked with our adhesive remover or acetone and then removed again with a glass scraper or ceramic field scraper. You will find detailed instructions on how to remove window films on our homepage in the FAQ`s.
Order a product sample...

We will be happy to send you a free sample of this and up to four other films without obligation.
The samples are approx. 9 x 9 cm in size and will be sent to you free of charge and without obligation by letter post.

1. select sample (max. 5 pieces)
One Way Mirror & Splinter Protection Film 100 µm, silver dark mirrored One Way Mirror & Splinter Protection Film 100 µm, silver dark mirrored
Art.-Nr. 132630
Please select at least one sample!
2. Specify shipping address
Flat, floor, etc. (optional)
I accept the privacy policy.
Thank you very much!
We have received your foil requests.
The samples are usually sent to you within one working day.

Assembly instructions

Montagevideo starten
Installation video for window films. Click on the image to start.

Tool for easy assembly

The tool sets and accessories offered by Velken will be very useful for the success of your installation! Adhesive films, electrostatic films, decorative coatings... for each product there is the appropriate tool.

In addition to the assembly video, take a look at the detailed assembly instructions.

- 30 %
Assembly set professional
This installation set is ideal for medium-sized film installations of up to five windows with a maximum area of 2m² each . You save almost 23% with this bundle compared to the individual components.
040020 - Assembly set professional
€14.25 €9.95
One Way Mirror Film, blue
  • Outdoor installation
  • self-adhesive
Privacy screen by day:
Light transmission:
€36.90 / m²
One Way Mirror Film, bronze
  • Indoor or outdoor installation
  • self-adhesive
Privacy screen by day:
Light transmission:
€32.90 / m²
One Way Mirror Film, green
  • Outdoor installation
  • self-adhesive
Privacy screen by day:
Light transmission:
€36.90 / m²
One Way Mirror Window Film, silver
  • Indoor or outdoor installation
  • self-adhesive
Privacy screen by day:
Light transmission:
€32.90 / m²
Sonnenschutzfolie silber mittel verspiegelt
  • Indoor or outdoor installation
  • self-adhesive
Privacy screen by day:
Light transmission:
€32.90 / m²
- 30 %
- 22 %
Mounting set
Mounting set
€6.35 €4.95
- 28 %
Premium mounting set
Premium mounting set
€49.15 €34.90
- 13 %
Edge sealing set
Edge sealing set
€28.80 €24.90
- 30 %
- 22 %
Mounting set
Mounting set
€6.35 €4.95
Tile film, maple light
Tile film, maple light
€32.40 / m²
- 28 %
Premium mounting set
Premium mounting set
€49.15 €34.90
- 13 %
Edge sealing set
Edge sealing set
€28.80 €24.90
Questions & Answers
No questions have been asked so far.
Ask a question
Your question will be publicly visible and can - in addition to our support - also be answered by a member of our community. answered by a member of our community. You can enter your publicly visible name and your email notifications in your customer account. configure.
Reviews 8

Customer reviews

∅ 4,9   from 5 stars for 8 ratings
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Write a review now!
2 days agoVerified purchase
TOP Artikel schnelle Lieferung

Wir sind sehr zufrieden mit der Folie und vor allem mit der schnellen Lieferung. Wir werden auch künftig gerne wieder bei Velken bestellen.
Manfred J. Kaufmann

2 month agoVerified purchase

Was kann man dazu sagen? Endlich hat jemand das geliefert, was er versprochen hat. Wir hatten nun schon mehrere heiße Tage dieses Jahr 2022. Wir haben nicht ein einziges Mal mal die Außen-Jalousie herunter gefahren und anschließend im Dunkeln gesessen. Unser Wohnzimmer 100% Südseite ausgerichtet ist kühl geblieben und wir konnten weiterhin rausschauen, einfach toll! Die Folie ist echte Klasse. Bestellung hat gut geklappt. Internet Anweisungen zum Maß nehmen genau richtig. Montageanleitung (Video) auch super. Alles selber montiert Frau 51 Jahre ich 59 Jahre. Also Dankeschön VELKEN-Team meine Frau und ich sind begeistert
VG Doro u Jörg

3 month agoVerified purchase

Artikel kam wie auf Maß bestellt. Beiliegende Beschreibung für die Vorgehensweise ist sehr gut.
Bin super zufrieden mit der Folie.

3 month agoVerified purchase

Folie wurde wie bestellt auf Maß geliefert und passt gut auf die Scheibe. Bei der Montage ist darauf zu achten wirklich alle Luftblasen zu entfernen. Diese bleiben sonst dauerhaft sichtbar. Vor allem von der Außenseite sieht der "Spiegel" nicht glatt aus.

Martin Siegel Customer service 3 month ago

Vielen Dank für Ihre Bewertung. Ich kann Sie beruhigen, die Blasen bleiben nicht dauerhaft sondern gehen mit der Zeit von ganz alleine weg. Sie müssen nichts weiter unternehmen als etwas Geduld mitbringen. Je nach Sonneneinstrahlung kann es mehrere Wochen lang dauern bis alle verschwunden sind. Am Ende erhalten Sie jedoch ein perfektes Ergebnis!

4 month agoVerified purchase
Folienservice Nr.1

Nachdem mir meine Bekannten und Freunde von Velken erzählt haben, habe ich mir vorerst ein paar Muster bestellt, welche innerhalb von 2 Tagen angekommen sind. Nachdem ich mich für eine Folie entschieden habe, kam diese innerhalb weniger Tage an und die Anbringung war leichter als gedacht. Die Qualität ist echt einzigartig. Vielen Dank und bis zum nächsten Mal! :-)

4 month agoVerified purchase
Klasse Service

Artikel wie beschrieben, Versand super schnell. Für meinen nächsten Lauf, wende ich mich definitiv wieder an Velken. Recht herzlichen Dank noch einmal!

7 month agoVerified purchase
Spion Spiegel / Splitterfolie

Nach Bestellung schnelle Lieferung.
Einfache Montage, Efekt sehr zu Frieden stellend. Hoffe das kleine Bläschen noch rausgehen nach Trocknung.
Kann ich nur weiter empfehlen.

10 month agoVerified purchase
Hans Gerhardt

Die Folie ist super promote Lieferung alles ganz einfach die Montage. Kann ich nur weiter empfehlen. Bin sehr von dem Produkt angetan.

Last viewed