Sichtschutzfolie, leicht transparent matt

  • self-adhesive
  • Indoor assembly, Outdoor installation
Sichtschutzfolie, leicht transparent matt
Montagevideo starten
Geometry Linear metre
Rectangle
Square
Pentagon with slope
Rectangle with bevel
Rectangle with two slopes
symmetric trapezoid
right triangle
symmetrical triangle
Gable window
Rectangle with segmental arch
Rectangle with basket arch
Rectangle with semicircle
Quarter circle
Circle
Semicircle
Circle section
Oval / Ellipse
Available in the dimensions:
min. 5,0 x 5,0 cm
max. 150 x 3.050,0 cm
Width [cm]
Height [cm]
Cutting possible on request
Unfortunately, your desired size cannot be ordered via the online shop. However, we can still offer you the dimensions. Please ask our customer service at info@velken.shop.
from €1.05

Price per m² from: €39.90 Price per m²: €35.91 Price per m²: €39.90 incl. VAT plus shipping costs. Item no. 213030

Order accessories directly

Facilitates the installation of window films immensely! The films can be positioned on the glass without sticking. The concentrate is sufficient for an area of approx. 6m². The appropriate quantity is offered in the shopping basket.

Transfer concentrate
€3.49

This assembly set is suitable for smaller foil assemblies of up to 6m². In the set price you save over 15% compared to the individual components.

Mounting set
€8.95

This assembly set is ideal for medium-sized film installations of 5-10 m². With this bundle you save almost 23% compared to the individual components.

Assembly set professional
€14.95

This mounting set for film mounting is especially suitable for large projects with an area of more than 10m² as well as permanent use. As a set, it is approx. 33% cheaper than the individual components.

Premium mounting set
€34.90

Delivery time approx. 1-4 days

CNC cutting accurate to the millimetre

free assembly tool

Properties of this film
Protection from
Look
Privacy screen
low
Light transmission
very high
Transparency
high
Design
without
Colour
transparent, white
Liability
self-adhesive
Mounting side
Indoor assembly, Outdoor installation
Questionst?
Start WhatsApp chat
Blickschutzfolie mit geringem Sichtschutz Kein Vergleich zu anderen Sichtschutzfolien: Diese...

Blickschutzfolie mit geringem Sichtschutz

Kein Vergleich zu anderen Sichtschutzfolien: Diese leicht matte, transparente Sichtschutzfolie unterscheidet sich durch ihren im Vergleich sehr geringen Sichtschutz von nur circa 60%.

Man kann weiterhin durch die Folie schauen und Gegenstände dahinter problemlos erkennen. Die Durchsicht ist auch auf hohe Distanz weiterhin möglich und wird nicht wie sonst bei Sichtschutzfolien überlich mit zunehmender Entfernung immer diffuser. Somit eigent sich diese Fensterfolie besonders für Scheiben bei denen man nur ganz leichten Sichtschutz benötigt und Passanten noch erkennen können will. Zugleich fällt weiterhin das Tageslicht nahezu ungestört in den Raum, die Optik des Fensters wird nur minimal verändert.

Eine weitere Einsatzmöglichkeit ist der Anlaufschutz auf innenliegenden Glastrennwänden oder Glastüren. Hier reichen schon Streifen mit kleinen Breiten um das Glas kenntlich zu machen.

[OS_SUBTMPL:artikel/beschreibung_lieferumfang.html]

Technical data and information at a glance...

Garantie des Herstellers

Der Hersteller gewährt auf diese Milchglasfolie eine Garantie von 10 Jahren für die Innenmontage. Diese Garantie bezieht sich auf das Abblättern und Vergilben der Folie.

Die Haltbarkeit der Milchglasfolien für die Innenmontage liegt in Abhängigkeit verschiedener Faktoren bei bis zu 15 Jahren in Mitteleuropa.

EigenschaftenAußenmontage
Licht- Reflexion Innen 10 %
Außen 11 %
Transmission 78 %
Solar- Reflexion 10 %
Absorption 10 %
Transmission 78 %
Schattierungs- Koeffizient 0,80
Wärmedurchgangs- Koeffizient (U-Wert) 5,60
Gesamt- Energiedurchlassgrad (g-Wert) 0,71
Emissionsgrad k.A.
UV- Reduzierung 95 %
Blendreduzierung 23 %
Gesamte Energieabweisung (Außen) 17 %

Erklärung von Lichttransmission, Reflexion, Absorbtion

[OS_SUBTMPL:artikel/produktdaten_eigenschaften_hinweis.html]

Technische Daten
Material Polyesterfilm
Foliendicke ca. 60 µm
Kleber Pressure sensitive- Klebesystem

[OS_SUBTMPL:artikel/produktdaten_montageempfehlung_head.html]

[OS_SUBTMPL:artikel/produktdaten_montageempfehlung_agb.html]

Answers to the most frequently asked questions...

General questions

Can I get a free foil sample?

Of course, please click on this link to access the corresponding order form. You are welcome to add to the list of items if you wish. There are no costs for you!

Will you also cut the film for me?

We cut each film to the exact millimetre according to the dimensions you enter. The cutting is free of charge. You can find detailed instructions on how to measure your panes here.

Alternatively, you can also cut your film by hand with a cutter knife. However, this requires a little manual skill, so you are usually better off using our free service.

Can you also cut a round blank or other geometry?

In general, almost all 2D shapes can be produced. Many geometries (e.g. triangles, trapezoids, circles) can be ordered directly via the online shop. To do so, please click on the orange rectangle to the right of the article image. You can then choose between many different shapes.

For shapes that are not specified, please send us a small sketch (photo) in which you specify the side lengths, radii or angles. Please contact us for this purpose.

Does the film also adhere to surfaces other than glass?

The window film adheres to all surfaces that are approximately as smooth as glass. When applying the film to plastic, please bear in mind that the adhesive may bond with the plastic, making it impossible to remove the film cleanly later.

How can I clean my window pane with the film in place?

You can keep your window pane clean as usual. The film should not be rubbed with sharp-edged objects (e.g. a brush).
You can find more information in our guide General care instructions for window films.

Can the film be removed without leaving any residue?

All window films can be removed without leaving any residue and without damaging the glass surface!
Below you will find detailed instructions on how to remove old window films.

Can you also print on films?

Unfortunately, we do not currently offer foil printing and do not have any partner companies with whom we can realise foil printing.

How to mount this film on the window...
Start assembly video
Installation video for window films. Click on the picture to start.

Assembly instructions for Privacy films (self-adhesive)

You will need the following items

Installation tips

  • Two people should carry out the installation!
  • Do not install any film at temperatures on the installation side below +6° C.
  1. Fill the spray bottle with 0.5 litres of water and add the transfer concentrate (30 ml) (enough for approx. 6 to 7 m² of glass surface).
  2. Thoroughly clean the glass with commercial or our glass cleaner!
    Remove all sticky particles (e.g. paint or fly dirt) preferably with the Glass scraper blade. No dirt residues should remain on the glass!
  3. The sandblasting foil consists of the mostly white backing paper and the actual sandblasting foil.
    Now place the sandblasting foil with the view side down on the glass pane or similar. You are now looking at the back of the film.
    Then carefully and slowly peel off the backing paper at as shallow an angle as possible until it is about halfway along the entire length of the film. Cut the backing paper and stick it back onto the sandblasting film with a gap of about 2 cm to the remaining backing paper.
  4. Now hold the in place while the 2nd person starting from the corner, and at the same time spray the adhesive side of the that is now exposed with the liquid.
    Afterwards, the glass pane (surface to be pasted) must be sprayed with the liquid. Do not be sparing with the liquid, the film and pane should be well wet.
  5. Place the on the glass, the film should slide back and forth well, otherwise spray the glass again.
  6. Now spray the other side of the as well, this will make it easier for you to work with the mounting squeegee.
  7. Now press the liquid out evenly with the mounting squeegee from the centre to the right and to the left. Make sure that there is no residual water left under the film! Repeat this procedure several times to remove even invisible water residues. When doing this, wrap the supplied squeegee with a paper towel to avoid any scratches.
  8. Carefully wipe the edges and the foil with a soft cloth. If necessary, press the edges again with the mounting squeegee.
  9. Now let the dry for three days without touching it.
  10. Wait two weeks before cleaning the film for the first time and never use hard objects (brush or blade) to clean it. Commercially available glass cleaners can be used.

FAQ`s about the installation

Can I carry out the film installation alone?

Films that are no larger than 1m² can be installed alone without any problems.
For larger pieces, it is recommended that two people carry out the installation. This makes it easier to handle the film and place it on the pane.

How can I avoid dust inclusions under the adhesive back side?

First, clean your windows really thoroughly with glass cleaner. Then go over the entire window pane again with our supplied Glass scraper blade to remove any hard-core impurities on the pane (such as fly droppings). These fine stains are often invisible to the naked eye and you will be amazed at what the blade still removes.

In addition, do not lay the after peeling off (covers the adhesive side for transport) on the floor to get it wet. Rather, pull a table nearby to spray the film on. On the floor you will always stir up very fine dust particles, which will then settle on the adhesive side facing upwards. These dust particles can later show up on the pane under the , which is something to avoid.

Can I apply the without transfer concentrate?

Alternatively, you should at least use a pH-neutral cleaner. We do not recommend installation without any additive at all, which increases the gliding properties of the water!

We strongly advise against the use of water diluted with detergent. This can lead to streaking due to a reaction with the film adhesive.

Does the film have to be applied perfectly to the glass at the first attempt?

No, this is not necessary as long as you have sprayed the adhesive side of the window film and your glass sufficiently wet. Due to the moisture, the adhesive has no adhesive effect, which makes it easy to move the film and position it precisely. It is even possible to remove the film from the glass again and reapply it.

After mounting, small bubbles formed the next day

The bubbles consist of residual liquid that was not pressed out from under the film when it was applied. Over time, these run down between the already drying film adhesive as far as they can under the film and collect in some places. The bubbles disappear by themselves when the remaining liquid diffuses through the film to the outside. Depending on the outside temperature and sunlight, this can take up to three or more weeks before the film fits like a second skin.

In any case, you should wait this time and do nothing. In most cases, the blisters disappear all by themselves!

How easy is it to remove the film?

The window film itself can be easily removed. To do this, detach one corner and fold it over directly. The film can then be removed from the glass at as flat an angle as possible.

It is possible that residues of the film adhesive remain in some places. These can be soaked with our adhesive remover or acetone and then removed again with a glass scraper or ceramic field scraper. You will find detailed instructions on how to remove window films on our homepage in the FAQ`s.
Order a product sample...

We will be happy to send you a free sample of this and up to four other films without obligation.
The samples are approx. 9 x 9 cm in size and will be sent to you free of charge and without obligation by letter post.

1. select sample (max. 5 pieces)
Sichtschutzfolie, leicht transparent matt Sichtschutzfolie, leicht transparent matt
Art.-Nr. 213030
Please select at least one sample!
2. Specify shipping address
Flat, floor, etc. (optional)
Germany
Here you can find our privacy policy.
Thank you very much!
We have received your foil requests.
The samples are usually sent to you within one working day.
Customer service

Foil expert Martin Siegel - Managing Director

» Do you have any questions about this item? I'm happy to help!«

Assembly instructions

Montagevideo starten
Installation video for window films. Click on the image to start.

Tool for easy assembly

The tool sets and accessories offered by Velken will be very useful for the success of your installation! Adhesive films, electrostatic films, decorative coatings... for each product there is the appropriate tool.

In addition to the assembly video, take a look at the detailed assembly instructions.

- 25 %
Assembly set professional
This assembly set is ideal for medium-sized film installations of 5-10 m². With this bundle you save almost 23% compared to the individual components.
040020 - Assembly set professional
€20.20 €14.95
BESTSELLER
Order frosted glass film for windows as a made-to-measure privacy film
  • Indoor assembly
  • self-adhesive
Privacy screen by day and night:
Light transmission:
€26.84 / m²
Sichtschutzfolie Frostglasdesign weiß matt
  • Indoor assembly
  • self-adhesive
Privacy screen by day and night:
Light transmission:
€26.84 / m²
Privacy film, sandblasted design white matt
  • Indoor assembly
  • self-adhesive
Privacy screen by day and night:
Light transmission:
€26.90 / m²
Fensterfolie blickdicht für Badezimmer
  • Indoor assembly
  • self-adhesive
Privacy screen by day and night:
Light transmission:
€34.18 / m²
- 27 %
Ein Montageset mit Sprühflasche, Filzrakel und Transferkonzentrat für perfekte Ergebnisse.
Mounting set
€12.30 €8.95
- 25 %
Assembly set professional
Assembly set professional
€20.20 €14.95
- 28 %
Premium mounting set
Premium mounting set
€49.15 €34.90
- 18 %
Sichtschutzfolie grau matt
Privacy film, matt grey
€23.90 / m²
- 25 %
Assembly set professional
Assembly set professional
€20.20 €14.95
- 27 %
Ein Montageset mit Sprühflasche, Filzrakel und Transferkonzentrat für perfekte Ergebnisse.
Mounting set
€12.30 €8.95
Adhäsionsfolie Frosted
Adhesive film, Frosted
€37.82 / m²
Questions about the item1
1 Question(s) in other languages.
Click here to view these question(s).
Question:
Wie verhält sich die Folie, wenn man sie auf einen Spiegel klebt. Hat man dann einen ähnlichen Effekt oder wird sie viel undurchlässiger, weil die Lichtquelle von der anderen Seite fehlt? Mein Ziel ist ein Spiegel, indem man sich sehen kann, aber keine Details erkennt.
A. K. am 25. February 2024
Answer:
Die Folie wird viel undurchsichtiger, man kann sich kaum noch im Spiegel erkennen. Wenn man ganz nah vor dem Spiegel steht erkennt man noch schemenhafte Umrisse, mit 30cm Abstand sieht man nur noch eine milchige Fläche.
Velken Service-Team on 26. February 2024
Compose reply
  Ask new question
Your question will be publicly visible and can - in addition to our support - also be answered by a member of our community.
Reviews 0
Be the first to rate this article!
Write a review now!
Last viewed